linux-next: WARNING: at fs/sysfs/dir.c:425sysfs_add_one+0x31/0x7a()
From: Thomas Meyer
Date: Fri May 09 2008 - 16:56:51 EST
I get this warning while setting up a packet dvd mapping with:
# pktsetup pktcdvd0 /dev/sr0
PS: Is the bug descibed in commit 7b3d9545f9ac8b31528dd2d6d8ec8d19922917b8 already fixed?
->
The proper fix for that is probably to just do something like
bdev->bd_inode->i_size = (loff_t)get_capacity(disk)<<9;
in fs/block_dev.c:do_open() even for the cases where we're not the
original opener (but *not* call bd_set_size(), since that will also
change the block size of the device).
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 2.6.26-rc1-next-20080509 (thomas@dhcppc1) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #26 SMP Fri May 9 18:48:22 CEST 2008
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffd0000 (usable)
[ 0.000000] BIOS-e820: 00000000bffd0000 - 00000000bffde000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bffde000 - 00000000c0000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 00000001c0000000 (usable)
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] 6272MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at [c00ff780] 000ff780
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] Entering add_active_range(0, 0, 1835008) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 1835008
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 1835008
[ 0.000000] On node 0 totalpages: 1835008
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 12544 pages used for memmap
[ 0.000000] HighMem zone: 1593088 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: RSDP 000F98B0, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT BFFD0000, 003C (r1 MSIISM OEMRSDT 4000807 MSFT 97)
[ 0.000000] ACPI: FACP BFFD0200, 0084 (r2 MSIISM OEMFACP 4000807 MSFT 97)
[ 0.000000] ACPI: DSDT BFFD0440, 5045 (r1 1ADGH 1ADGH013 13 INTL 20051117)
[ 0.000000] ACPI: FACS BFFDE000, 0040
[ 0.000000] ACPI: APIC BFFD0390, 0070 (r1 MSIISM OEMAPIC 4000807 MSFT 97)
[ 0.000000] ACPI: MCFG BFFD0400, 003C (r1 MSIISM OEMMCFG 4000807 MSFT 97)
[ 0.000000] ACPI: OEMB BFFDE040, 0061 (r1 MSIISM AMI_OEM 4000807 MSFT 97)
[ 0.000000] ACPI: HPET BFFD5490, 0038 (r1 MSIISM OEMHPET0 4000807 MSFT 97)
[ 0.000000] ACPI: SSDT BFFD54D0, 028A (r1 A M I POWERNOW 1 AMD 1)
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 40616 bytes of per cpu data
[ 0.000000] NR_CPUS: 32, nr_cpu_ids: 2
[ 0.693310] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1820672
[ 0.693310] Kernel command line: ro root=LABEL=ROOT rhgb
[ 0.693310] mapped APIC to ffffb000 (fee00000)
[ 0.693310] mapped IOAPIC to ffffa000 (fec00000)
[ 0.693310] Enabling fast FPU save and restore... done.
[ 0.693310] Enabling unmasked SIMD FPU exception support... done.
[ 0.693310] Initializing CPU#0
[ 0.693310] CPU 0 irqstacks, hard=c07b4000 soft=c0794000
[ 0.693310] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.693310] Detected 2599.983 MHz processor.
[ 0.693310] spurious 8259A interrupt: IRQ7.
[ 0.693310] Console: colour VGA+ 80x25
[ 0.693310] console [tty0] enabled
[ 0.693310] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.693310] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.693310] Memory: 6224164k/7340032k available (2203k kernel code, 65888k reserved, 1153k data, 272k init, 5373760k highmem)
[ 0.693310] virtual kernel memory layout:
[ 0.693310] fixmap : 0xffe13000 - 0xfffff000 (1968 kB)
[ 0.693310] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.693310] vmalloc : 0xf8800000 - 0xff9fe000 ( 113 MB)
[ 0.693310] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.693310] .init : 0xc074d000 - 0xc0791000 ( 272 kB)
[ 0.693310] .data : 0xc0626fe5 - 0xc07476e0 (1153 kB)
[ 0.693310] .text : 0xc0400000 - 0xc0626fe5 (2203 kB)
[ 0.693310] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.693310] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.693310] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.693310] hpet clockevent registered
[ 0.753179] Calibrating delay using timer specific routine.. 5203.25 BogoMIPS (lpj=2601627)
[ 0.753301] Security Framework initialized
[ 0.753301] SELinux: Initializing.
[ 0.753301] SELinux: Starting in permissive mode
[ 0.753301] selinux_register_security: Registering secondary module capability
[ 0.753301] Capability LSM initialized as secondary
[ 0.753301] Mount-cache hash table entries: 512
[ 0.753301] Initializing cgroup subsys ns
[ 0.753301] Initializing cgroup subsys cpuacct
[ 0.753301] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.753301] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.753301] CPU 0(2) -> Core 0
[ 0.753301] Intel machine check architecture supported.
[ 0.753301] Intel machine check reporting enabled on CPU#0.
[ 0.753373] Checking 'hlt' instruction... OK.
[ 0.758300] ACPI: Core revision 20080321
[ 0.764544] ENABLING IO-APIC IRQs
[ 0.764807] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.774854] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 02
[ 0.775298] CPU 1 irqstacks, hard=c07b5000 soft=c0795000
[ 0.775298] Booting processor 1/1 ip 6000
[ 0.775298] Initializing CPU#1
[ 0.775298] Calibrating delay using timer specific routine.. 5199.66 BogoMIPS (lpj=2599831)
[ 0.775298] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.775298] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.775298] CPU 1(2) -> Core 1
[ 0.775298] Intel machine check architecture supported.
[ 0.775298] Intel machine check reporting enabled on CPU#1.
[ 0.775298] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.846287] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 02
[ 0.846873] Brought up 2 CPUs
[ 0.846928] Total of 2 processors activated (10402.91 BogoMIPS).
[ 0.847023] CPU0 attaching sched-domain:
[ 0.847025] domain 0: span 0-1
[ 0.847026] groups: 0 1
[ 0.847029] CPU1 attaching sched-domain:
[ 0.847031] domain 0: span 0-1
[ 0.847032] groups: 1 0
[ 0.847287] net_namespace: 660 bytes
[ 0.847287] Booting paravirtualized kernel on bare hardware
[ 0.847287] NET: Registered protocol family 16
[ 0.847287] No dock devices found.
[ 0.848287] ACPI: bus type pci registered
[ 0.848287] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.848287] PCI: Not using MMCONFIG.
[ 0.848287] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=7
[ 0.848287] PCI: Using configuration type 1 for base access
[ 0.848287] Setting up standard PCI resources
[ 0.853772] ACPI: EC: Look up EC in DSDT
[ 0.862056] ACPI: Interpreter enabled
[ 0.862113] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.862276] ACPI: Using IOAPIC for interrupt routing
[ 0.862284] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.866970] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.867029] PCI: Using MMCONFIG for extended config space
[ 0.875346] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.876282] PCI: Transparent bridge -
[ 0.876282] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.876559] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.876715] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[ 0.876797] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[ 0.876880] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[ 0.876962] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
[ 0.877044] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
[ 0.877126] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR15._PRT]
[ 0.886281] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 0.886281] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 0.886669] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 0.887054] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.887441] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[ 0.887827] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
[ 0.888191] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[ 0.888579] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
[ 0.888964] ACPI: PCI Interrupt Link [LUB0] (IRQs 21 22 23) *7
[ 0.889280] ACPI: PCI Interrupt Link [LMAD] (IRQs 20) *5
[ 0.889589] ACPI: PCI Interrupt Link [LUB2] (IRQs 21 22 23) *10
[ 0.889933] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *11
[ 0.890240] ACPI: PCI Interrupt Link [LAZA] (IRQs 21 22 23) *10
[ 0.890588] ACPI: PCI Interrupt Link [LSMB] (IRQs 21 22 23) *11
[ 0.890933] ACPI: PCI Interrupt Link [LPMU] (IRQs 21 22 23) *5
[ 0.891278] ACPI: PCI Interrupt Link [LSA0] (IRQs 21 22 23) *11
[ 0.891626] ACPI: PCI Interrupt Link [LSA1] (IRQs 21 22 23) *5
[ 0.892003] ACPI: PCI Interrupt Link [LATA] (IRQs 21 22 23) *0, disabled.
[ 0.892372] ACPI: PCI Interrupt Link [LSA2] (IRQs 21 22 23) *10
[ 0.893280] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 03, should be 02 [20080321]
[ 0.893280] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.893280] pnp: PnP ACPI init
[ 0.893280] ACPI: bus type pnp registered
[ 0.898274] pnp: PnP ACPI: found 15 devices
[ 0.898279] ACPI: ACPI bus type pnp unregistered
[ 0.898279] usbcore: registered new interface driver usbfs
[ 0.898279] usbcore: registered new interface driver hub
[ 0.898279] usbcore: registered new device driver usb
[ 0.898279] PCI: Using ACPI for IRQ routing
[ 0.900252] NetLabel: Initializing
[ 0.900279] NetLabel: domain hash size = 128
[ 0.900279] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.900279] NetLabel: unlabeled traffic allowed by default
[ 0.900279] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.900279] hpet0: 3 32-bit timers, 25000000 Hz
[ 0.901278] tracer: 643 pages allocated for 65536<6> entries of 40 bytes
[ 0.901278] actual entries 65586
[ 0.901402] Switched to high resolution mode on CPU 0
[ 0.901402] Switched to high resolution mode on CPU 1
[ 0.905438] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.905497] system 00:06: ioport range 0x800-0x80f has been reserved
[ 0.905556] system 00:06: ioport range 0x2000-0x207f has been reserved
[ 0.906306] system 00:06: ioport range 0x2080-0x20ff has been reserved
[ 0.906316] system 00:06: ioport range 0x2400-0x247f has been reserved
[ 0.906381] system 00:06: ioport range 0x2480-0x24ff has been reserved
[ 0.906440] system 00:06: ioport range 0x2800-0x287f has been reserved
[ 0.906499] system 00:06: ioport range 0x2880-0x28ff has been reserved
[ 0.906558] system 00:06: ioport range 0x2c00-0x2c7f has been reserved
[ 0.906619] system 00:06: ioport range 0x2c80-0x2cff has been reserved
[ 0.906679] system 00:06: iomem range 0xfbf80000-0xfbfbffff has been reserved
[ 0.906739] system 00:06: iomem range 0xfee01000-0xfeefffff could not be reserved
[ 0.906835] system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.906927] system 00:08: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.907022] system 00:0b: ioport range 0xa00-0xa0f has been reserved
[ 0.907081] system 00:0b: ioport range 0xa10-0xa1f has been reserved
[ 0.907143] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.907205] system 00:0d: iomem range 0xd0000000-0xdfffffff could not be reserved
[ 0.907300] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.907325] system 00:0e: iomem range 0xc0000-0xcffff could not be reserved
[ 0.907390] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 0.907449] system 00:0e: iomem range 0x100000-0xbfffffff could not be reserved
[ 0.907541] system 00:0e: iomem range 0xfec00000-0xffffffff could not be reserved
[ 0.938315] PCI: Bridge: 0000:00:06.0
[ 0.938315] IO window: disabled.
[ 0.938377] MEM window: disabled.
[ 0.938433] PREFETCH window: disabled.
[ 0.938489] PCI: Bridge: 0000:00:0a.0
[ 0.938545] IO window: disabled.
[ 0.938605] MEM window: disabled.
[ 0.938661] PREFETCH window: disabled.
[ 0.938718] PCI: Bridge: 0000:00:0b.0
[ 0.938773] IO window: disabled.
[ 0.938829] MEM window: disabled.
[ 0.938884] PREFETCH window: disabled.
[ 0.938941] PCI: Bridge: 0000:00:0c.0
[ 0.938996] IO window: disabled.
[ 0.939052] MEM window: disabled.
[ 0.939107] PREFETCH window: disabled.
[ 0.939164] PCI: Bridge: 0000:00:0d.0
[ 0.939219] IO window: disabled.
[ 0.939275] MEM window: disabled.
[ 0.939331] PREFETCH window: disabled.
[ 0.939393] PCI: Bridge: 0000:00:0e.0
[ 0.939448] IO window: disabled.
[ 0.939504] MEM window: disabled.
[ 0.939559] PREFETCH window: disabled.
[ 0.939621] PCI: Bridge: 0000:00:0f.0
[ 0.939677] IO window: e000-efff
[ 0.939733] MEM window: 0xfc000000-0xfebfffff
[ 0.939790] PREFETCH window: 0x00000000c0000000-0x00000000cfffffff
[ 0.939854] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 0.939861] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 0.939867] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 0.939873] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 0.939879] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 0.939884] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 0.939890] PCI: Setting latency timer of device 0000:00:0f.0 to 64
[ 0.939900] NET: Registered protocol family 2
[ 0.943400] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.943694] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.944418] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.944793] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.944852] TCP reno registered
[ 0.946411] NET: Registered protocol family 1
[ 0.946570] checking if image is initramfs... it is
[ 1.118365] Freeing initrd memory: 2990k freed
[ 1.119249] Machine check exception polling timer started.
[ 1.119270] audit: initializing netlink socket (disabled)
[ 1.119270] type=2000 audit(1210363084.427:1): initialized
[ 1.124252] highmem bounce pool size: 64 pages
[ 1.124252] Total HugeTLB memory allocated, 0
[ 1.126302] VFS: Disk quotas dquot_6.5.1
[ 1.126302] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.126304] msgmni has been set to 1668 for ipc namespace c071fcc0
[ 1.126304] SELinux: Registering netfilter hooks
[ 1.126426] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.126518] io scheduler noop registered
[ 1.126574] io scheduler anticipatory registered
[ 1.126631] io scheduler deadline registered
[ 1.126694] io scheduler cfq registered (default)
[ 1.126774] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 1.137360] pci 0000:00:05.0: Enabling HT MSI Mapping
[ 1.137427] pci 0000:00:05.1: Enabling HT MSI Mapping
[ 1.137493] pci 0000:00:05.2: Enabling HT MSI Mapping
[ 1.137559] pci 0000:00:06.0: Enabling HT MSI Mapping
[ 1.137626] pci 0000:00:06.1: Enabling HT MSI Mapping
[ 1.137695] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 1.137763] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 1.137829] pci 0000:00:0a.0: Enabling HT MSI Mapping
[ 1.137896] pci 0000:00:0b.0: Enabling HT MSI Mapping
[ 1.137963] pci 0000:00:0c.0: Enabling HT MSI Mapping
[ 1.138282] pci 0000:00:0d.0: Enabling HT MSI Mapping
[ 1.138282] pci 0000:00:0e.0: Enabling HT MSI Mapping
[ 1.138282] pci 0000:00:0f.0: Enabling HT MSI Mapping
[ 1.138282] pci 0000:07:00.0: Boot video device
[ 1.138827] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 1.138844] assign_interrupt_mode Found MSI capability
[ 1.138916] Allocate Port Service[]
[ 1.139251] Allocate Port Service[]
[ 1.139251] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 1.139251] assign_interrupt_mode Found MSI capability
[ 1.139251] Allocate Port Service[]
[ 1.139251] Allocate Port Service[]
[ 1.139251] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 1.139251] assign_interrupt_mode Found MSI capability
[ 1.139251] Allocate Port Service[]
[ 1.139251] Allocate Port Service[]
[ 1.139251] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 1.139251] assign_interrupt_mode Found MSI capability
[ 1.139251] Allocate Port Service[]
[ 1.139251] Allocate Port Service[]
[ 1.139256] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 1.139256] assign_interrupt_mode Found MSI capability
[ 1.139256] Allocate Port Service[]
[ 1.139256] Allocate Port Service[]
[ 1.139256] PCI: Setting latency timer of device 0000:00:0f.0 to 64
[ 1.139256] assign_interrupt_mode Found MSI capability
[ 1.139307] Allocate Port Service[]
[ 1.139342] Allocate Port Service[]
[ 1.139450] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.139818] processor ACPI0007:00: registered as cooling_device0
[ 1.139922] processor ACPI0007:01: registered as cooling_device1
[ 1.143985] isapnp: Scanning for PnP cards...
[ 1.498637] isapnp: No Plug & Play device found
[ 1.501787] Real Time Clock Driver v1.12ac
[ 1.502249] hpet_resources: 0xfed00000 is busy
[ 1.502249] Non-volatile memory driver v1.2
[ 1.502249] Linux agpgart interface v0.103
[ 1.502262] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.746115] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.747248] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.748250] brd: module loaded
[ 1.748878] input: Macintosh mouse button emulation as /class/input/input0
[ 1.749250] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.751813] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.751874] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.753250] mice: PS/2 mouse device common for all mice
[ 1.795817] cpuidle: using governor ladder
[ 1.795817] cpuidle: using governor menu
[ 1.795817] usbcore: registered new interface driver hiddev
[ 1.795817] usbcore: registered new interface driver usbhid
[ 1.795817] usbhid: v2.6:USB HID core driver
[ 1.797295] TCP cubic registered
[ 1.797295] Initializing XFRM netlink socket
[ 1.797295] NET: Registered protocol family 17
[ 1.797295] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ processors (2 cpu cores) (version 2.20.00)
[ 1.798318] powernow-k8: 0 : fid 0x12 (2600 MHz), vid 0x8
[ 1.798318] powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xa
[ 1.798318] powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xc
[ 1.798318] powernow-k8: 3 : fid 0xc (2000 MHz), vid 0xe
[ 1.798318] powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x10
[ 1.798318] powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x12
[ 1.798318] Using IPI No-Shortcut mode
[ 1.798318] registered taskstats version 1
[ 1.798383] Freeing unused kernel memory: 272k freed
[ 1.798464] Write protecting the kernel text: 2204k
[ 1.798560] Write protecting the kernel read-only data: 948k
[ 2.067250] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
[ 2.067250] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 23 (level, low) -> IRQ 23
[ 2.067400] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 2.067403] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 2.067529] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 2.067640] ehci_hcd 0000:00:02.1: debug port 1
[ 2.067698] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[ 2.067708] ehci_hcd 0000:00:02.1: irq 23, io mem 0xfbffac00
[ 2.073333] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 2.073511] usb usb1: configuration #1 chosen from 1 choice
[ 2.073588] hub 1-0:1.0: USB hub found
[ 2.073648] hub 1-0:1.0: 10 ports detected
[ 2.277254] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.277254] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22
[ 2.277254] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 22 (level, low) -> IRQ 22
[ 2.277403] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 2.277406] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 2.277519] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 2.277625] ohci_hcd 0000:00:02.0: irq 22, io mem 0xfbffb000
[ 2.330334] usb usb2: configuration #1 chosen from 1 choice
[ 2.330412] hub 2-0:1.0: USB hub found
[ 2.330474] hub 2-0:1.0: 10 ports detected
[ 2.379323] usb : new high speed USB device using ehci_hcd and address 2
[ 2.443250] USB Universal Host Controller Interface driver v3.0
[ 2.493711] usb 1-3: configuration #1 chosen from 1 choice
[ 2.523250] SCSI subsystem initialized
[ 2.543250] Driver 'sd' needs updating - please use bus_type methods
[ 2.581298] libata version 3.00 loaded.
[ 2.600730] usb : new high speed USB device using ehci_hcd and address 3
[ 2.605313] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 2.605313] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[ 2.605313] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LSA0] -> GSI 21 (level, low) -> IRQ 21
[ 2.605313] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 2.605313] ACPI: PCI interrupt for device 0000:00:05.0 disabled
[ 2.606361] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 23
[ 2.606361] ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [LSA1] -> GSI 23 (level, low) -> IRQ 23
[ 2.606361] PCI: Setting latency timer of device 0000:00:05.1 to 64
[ 2.606361] ACPI: PCI interrupt for device 0000:00:05.1 disabled
[ 2.606361] ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 22
[ 2.606361] ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [LSA2] -> GSI 22 (level, low) -> IRQ 22
[ 2.606361] PCI: Setting latency timer of device 0000:00:05.2 to 64
[ 2.606361] ACPI: PCI interrupt for device 0000:00:05.2 disabled
[ 2.715250] usb 1-4: configuration #1 chosen from 1 choice
[ 2.715378] hub 1-4:1.0: USB hub found
[ 2.715482] hub 1-4:1.0: 4 ports detected
[ 2.981325] usb : new low speed USB device using ehci_hcd and address 4
[ 3.075492] usb 1-4.1: configuration #1 chosen from 1 choice
[ 3.083188] input: Microsoft Microsoft IntelliMouse Optical as /class/input/input1
[ 3.087307] input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse Optical] on usb-0000:00:02.1-4.1
[ 3.149325] usb : new low speed USB device using ehci_hcd and address 5
[ 3.235370] usb 1-4.2: configuration #1 chosen from 1 choice
[ 3.239412] input: DELL DELL USB Keyboard as /class/input/input2
[ 3.243283] input,hidraw1: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-0000:00:02.1-4.2
[ 3.252110] input: DELL DELL USB Keyboard as /class/input/input3
[ 3.256279] input,hidraw2: USB HID v1.10 Device [DELL DELL USB Keyboard] on usb-0000:00:02.1-4.2
[ 5.108253] pata_amd 0000:00:04.0: version 0.3.10
[ 5.108253] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 5.108253] scsi0 : pata_amd
[ 5.118250] scsi1 : pata_amd
[ 5.119250] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 5.119250] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 5.279664] ata1.00: ATA-6: IC35L090AVV207-0, V23OA63A, max UDMA/100
[ 5.279723] ata1.00: 160836480 sectors, multi 16: LBA48
[ 5.280011] ata1.01: ATA-6: Maxtor 32049H2, YAH814Y0, max UDMA/100
[ 5.280069] ata1.01: 39062500 sectors, multi 16: LBA
[ 5.280133] ata1: nv_mode_filter: 0x3f39f&0x3f01f->0x3f01f, BIOS=0x3f000 (0xc6c60000) ACPI=0x3f01f (20:20:0x15)
[ 5.280137] ata1: nv_mode_filter: 0x3f39f&0x3f01f->0x3f01f, BIOS=0x3f000 (0xc6c60000) ACPI=0x3f01f (20:20:0x15)
[ 5.289594] ata1.00: configured for UDMA/100
[ 5.295621] ata1.01: configured for UDMA/100
[ 5.296313] ata2: port disabled. ignoring.
[ 5.296313] scsi : Direct-Access ATA IC35L090AVV207-0 V23O PQ: 0 ANSI: 5
[ 5.296313] sd 0:0:0:0: [sda] 160836480 512-byte hardware sectors (82348 MB)
[ 5.296313] sd 0:0:0:0: [sda] Write Protect is off
[ 5.296313] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.296313] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.296313] sd 0:0:0:0: [sda] 160836480 512-byte hardware sectors (82348 MB)
[ 5.296389] sd 0:0:0:0: [sda] Write Protect is off
[ 5.296446] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.296465] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.296558] sda: sda1
[ 5.305384] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.305522] scsi : Direct-Access ATA Maxtor 32049H2 YAH8 PQ: 0 ANSI: 5
[ 5.305666] sd 0:0:1:0: [sdb] 39062500 512-byte hardware sectors (20000 MB)
[ 5.305734] sd 0:0:1:0: [sdb] Write Protect is off
[ 5.305792] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 5.305810] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.305937] sd 0:0:1:0: [sdb] 39062500 512-byte hardware sectors (20000 MB)
[ 5.306005] sd 0:0:1:0: [sdb] Write Protect is off
[ 5.306062] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 5.306081] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.306177] sdb: sdb1 sdb2 sdb3
[ 5.354189] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 7.857314] sata_nv 0000:00:05.0: version 3.5
[ 7.857314] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LSA0] -> GSI 21 (level, low) -> IRQ 21
[ 7.857314] sata_nv 0000:00:05.0: Using SWNCQ mode
[ 7.857314] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 7.867313] scsi2 : sata_nv
[ 7.867420] scsi3 : sata_nv
[ 7.867591] ata3: SATA max UDMA/133 cmd 0xd480 ctl 0xd400 bmdma 0xcc00 irq 21
[ 7.867651] ata4: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xcc08 irq 21
[ 8.345326] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 8.355489] ata3.00: ATAPI: PIONEER DVD-RW DVR-215, 1.18, max UDMA/66
[ 8.376318] ata3.00: configured for UDMA/66
[ 8.680320] ata4: SATA link down (SStatus 0 SControl 300)
[ 8.697127] scsi : CD-ROM PIONEER DVD-RW DVR-215 1.18 PQ: 0 ANSI: 5
[ 8.697303] ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [LSA1] -> GSI 23 (level, low) -> IRQ 23
[ 8.697313] sata_nv 0000:00:05.1: Using SWNCQ mode
[ 8.697579] PCI: Setting latency timer of device 0000:00:05.1 to 64
[ 8.708057] scsi4 : sata_nv
[ 8.708154] scsi5 : sata_nv
[ 8.708310] ata5: SATA max UDMA/133 cmd 0xc880 ctl 0xc800 bmdma 0xc080 irq 23
[ 8.708313] ata6: SATA max UDMA/133 cmd 0xc480 ctl 0xc400 bmdma 0xc088 irq 23
[ 9.038313] ata5: SATA link down (SStatus 0 SControl 300)
[ 9.352320] ata6: SATA link down (SStatus 0 SControl 300)
[ 9.362647] ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [LSA2] -> GSI 22 (level, low) -> IRQ 22
[ 9.362780] sata_nv 0000:00:05.2: Using SWNCQ mode
[ 9.363035] PCI: Setting latency timer of device 0000:00:05.2 to 64
[ 9.383313] scsi6 : sata_nv
[ 9.383313] scsi7 : sata_nv
[ 9.383313] ata7: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb480 irq 22
[ 9.383313] ata8: SATA max UDMA/133 cmd 0xb880 ctl 0xb800 bmdma 0xb488 irq 22
[ 9.714313] ata7: SATA link down (SStatus 0 SControl 300)
[ 10.028320] ata8: SATA link down (SStatus 0 SControl 300)
[ 12.735689] kjournald starting. Commit interval 5 seconds
[ 12.735758] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.373298] type=1404 audit(1210363096.680:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[ 13.794252] SELinux: 8192 avtab hash slots, 222567 rules.
[ 13.823798] SELinux: 8192 avtab hash slots, 222567 rules.
[ 13.846939] SELinux: 6 users, 12 roles, 2420 types, 115 bools, 1 sens, 1024 cats
[ 13.846942] SELinux: 67 classes, 222567 rules
[ 13.848406] SELinux: class peer not defined in policy
[ 13.848466] SELinux: class capability2 not defined in policy
[ 13.848531] SELinux: permission open in class dir not defined in policy
[ 13.848591] SELinux: permission open in class file not defined in policy
[ 13.848651] SELinux: permission open in class chr_file not defined in policy
[ 13.848710] SELinux: permission open in class blk_file not defined in policy
[ 13.848769] SELinux: permission open in class fifo_file not defined in policy
[ 13.848866] SELinux: permission recvfrom in class node not defined in policy
[ 13.848925] SELinux: permission sendto in class node not defined in policy
[ 13.848986] SELinux: permission ingress in class netif not defined in policy
[ 13.849045] SELinux: permission egress in class netif not defined in policy
[ 13.849136] SELinux: permission setfcap in class capability not defined in policy
[ 13.849237] SELinux: permission forward_in in class packet not defined in policy
[ 13.849335] SELinux: permission forward_out in class packet not defined in policy
[ 13.849518] SELinux: Completing initialization.
[ 13.849519] SELinux: Setting up existing superblocks.
[ 13.867753] SELinux: initialized (dev sdb1, type ext3), uses xattr
[ 14.109679] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
[ 14.109687] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 14.109755] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[ 14.109779] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[ 14.109785] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
[ 14.109790] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[ 14.109797] SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
[ 14.109800] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 14.109806] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[ 14.109809] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[ 14.109815] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[ 14.109843] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[ 14.109850] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 14.109859] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[ 14.109862] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[ 14.109879] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 14.116546] SELinux: policy loaded with handle_unknown=allow
[ 14.116612] type=1403 audit(1210363097.424:3): policy loaded auid=4294967295 ses=4294967295
[ 19.634483] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 19.634507] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 19.634530] scsi 2:0:0:0: Attached scsi generic sg2 type 5
[ 19.806411] input: Power Button (FF) as /class/input/input4
[ 19.816378] ACPI: Power Button (FF) [PWRF]
[ 19.816460] input: Power Button (CM) as /class/input/input5
[ 19.828364] ACPI: Power Button (CM) [PWRB]
[ 19.868316] input: PC Speaker as /class/input/input6
[ 19.894412] Driver 'sr' needs updating - please use bus_type methods
[ 19.930178] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 19.930178] Uniform CD-ROM driver Revision: 3.20
[ 19.930178] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 19.997315] ck804xrom ck804xrom_init_one(): Unable to register resource 0x0000000000000000-0x00000000ffffffff - kernel bug?
[ 19.997315] ck804xrom: ioremap(00000000, 00000000) failed
[ 20.125312] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2d00
[ 20.125312] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2e00
[ 20.289314] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 20.289616] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
[ 20.289616] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 20 (level, low) -> IRQ 20
[ 20.289616] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 20.804617] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x1c1 @ 0, addr 00:16:17:45:c9:df
[ 20.804621] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
[ 20.804928] ACPI: PCI Interrupt Link [LMAD] enabled at IRQ 20
[ 20.804931] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMAD] -> GSI 20 (level, low) -> IRQ 20
[ 20.804936] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 21.318622] forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x1c1 @ 1, addr 00:16:17:45:c9:de
[ 21.318625] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
[ 21.320759] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 21.320763] ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [LAZA] -> GSI 21 (level, low) -> IRQ 21
[ 21.320787] PCI: Setting latency timer of device 0000:00:06.1 to 64
[ 23.571366] SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
[ 24.763367] NET: Registered protocol family 10
[ 24.763776] lo: Disabled Privacy Extensions
[ 25.438492] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19
[ 25.438501] ACPI: PCI Interrupt 0000:07:00.0[A] -> Link [LNEB] -> GSI 19 (level, low) -> IRQ 19
[ 30.841686] device-mapper: uevent: version 1.0.3
[ 30.851317] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@xxxxxxxxxx
[ 31.312315] device-mapper: multipath: version 1.0.5 loaded
[ 32.962925] EXT3 FS on sdb1, internal journal
[ 33.442312] SELinux: initialized (dev sdb3, type ext2), uses xattr
[ 33.442600] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 35.551106] Adding 1004052k swap on /dev/mapper/crypt-swap. Priority:-1 extents:1 across:1004052k
[ 35.554317] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
[ 36.541879] warning: process `kudzu' used the deprecated sysctl system call with 1.23.
[ 37.054313] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 37.316315] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 37.495371] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 37.692322] Clocksource tsc unstable (delta = -153170760 ns)
[ 39.877681] eth1: no link during initialization.
[ 39.878653] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 46.696315] warning: `mcstransd' uses 32-bit capabilities (legacy support in use)
[ 47.516724] RPC: Registered udp transport module.
[ 47.516727] RPC: Registered tcp transport module.
[ 47.523319] SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
[ 48.539935] fuse init (API version 7.9)
[ 48.551522] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
[ 48.689317] eth0: no IPv6 routers present
[ 57.291404] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 57.973066] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 57.984313] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 58.526942] Bluetooth: Core ver 2.11
[ 58.531321] NET: Registered protocol family 31
[ 58.531321] Bluetooth: HCI device and connection manager initialized
[ 58.531321] Bluetooth: HCI socket layer initialized
[ 58.817315] Bluetooth: L2CAP ver 2.9
[ 58.817315] Bluetooth: L2CAP socket layer initialized
[ 58.847315] Bluetooth: RFCOMM socket layer initialized
[ 58.847315] Bluetooth: RFCOMM TTY layer initialized
[ 58.847315] Bluetooth: RFCOMM ver 1.8
[ 152.948369] usb 1-4.2: USB disconnect, address 5
[ 153.522399] usb : new low speed USB device using ehci_hcd and address 6
[ 153.604130] usb 1-4.2: configuration #1 chosen from 1 choice
[ 153.615434] input: DELL DELL USB Keyboard as /class/input/input7
[ 153.630650] input,hidraw1: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-0000:00:02.1-4.2
[ 153.647835] input: DELL DELL USB Keyboard as /class/input/input8
[ 153.667533] input,hidraw2: USB HID v1.10 Device [DELL DELL USB Keyboard] on usb-0000:00:02.1-4.2
[10104.578316] pktcdvd: writer pktcdvd0 mapped to sr0
[10104.578752] sysfs: duplicate filename '252:0' can not be created
[10104.578760] ------------[ cut here ]------------
[10104.578761] WARNING: at fs/sysfs/dir.c:425 sysfs_add_one+0x31/0x7a()
[10104.579325] Modules linked in: pktcdvd rfcomm l2cap bluetooth autofs4 fuse sunrpc nf_conntrack_netbios_ns nf_conntrack_ipv4 xt_state nf_conntrack ipt_REJECT iptable_filter ip_tables xt_tcpudp ip6t_REJECT ip6table_filter ip6_tables x_tables cpufreq_ondemand dm_crypt ext2 dm_mirror dm_log dm_multipath scsi_dh dm_mod ipv6 snd_hda_intel snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc snd_hwdep forcedeth snd soundcore serio_raw i2c_nforce2 i2c_core k8temp hwmon mtd chipreg map_funcs sr_mod pcspkr button cdrom sg sata_nv pata_amd pata_acpi ata_generic libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: scsi_wait_scan]
[10104.580322] Pid: 4127, comm: pktsetup Not tainted 2.6.26-rc1-next-20080509 #26
[10104.580322] [<c0427bed>] warn_on_slowpath+0x40/0x64
[10104.580322] [<c041ccee>] __wake_up_common+0x2e/0x58
[10104.580322] [<c041e909>] __wake_up+0x29/0x39
[10104.580322] [<c0427f1f>] wake_up_klogd+0x2b/0x2d
[10104.580322] [<c04bb05b>] sysfs_ilookup_test+0x0/0xd
[10104.580322] [<c0492465>] ifind+0x22/0x80
[10104.580322] [<c0428524>] printk+0x14/0x18
[10104.580322] [<c04bb2ad>] sysfs_add_one+0x31/0x7a
[10104.580322] [<c04bbe14>] sysfs_create_link+0x8f/0xdb
[10104.580322] [<c0563e81>] device_add+0x162/0x515
[10104.580322] [<c04f427b>] kobject_init_internal+0xf/0x26
[10104.580322] [<c05642b4>] device_create+0x70/0x9a
[10104.580322] [<f8bb782c>] pkt_setup_dev+0x30e/0x474 [pktcdvd]
[10104.580322] [<f8bb91cf>] pkt_ctl_ioctl+0x81/0x1aa [pktcdvd]
[10104.580322] [<c048c823>] vfs_ioctl+0x47/0x5d
[10104.580322] [<c048ca81>] do_vfs_ioctl+0x248/0x25f
[10104.580322] [<c048cad9>] sys_ioctl+0x41/0x58
[10104.580322] [<c04039da>] syscall_call+0x7/0xb
[10104.580322] =======================
[10104.580322] ---[ end trace cfc75e2e04550ee9 ]---
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/