Re: 2.6.25.2 - Jiffies/Time jumping back and forth (Regereesionfrom 2.6.24)

[Mike Galbraith]

On Thu, 2008-05-08 at 16:13 +0200, Thomas Gleixner wrote:
> On Thu, 8 May 2008, Martin Knoblauch wrote:
> > on two different systems running 2.6.25.2:
> > 
> > ibm x3650(2xDualCore)
> > -------------------------------------
> > [root@lpsdm60 ~]# cat /sys/devices/system/clocksource/clocksource0/available_clocksource
> > tsc hpet acpi_pm jiffies
> > [root@lpsdm60 ~]# cat /sys/devices/system/clocksource/clocksource0/current_clocksource
> > tsc
> > 
> > HP Proliant DL-380G4 (2xSingleCore)
> > ------------------------------------------------------------
> > [root@lpsdm52 ~]# cat /sys/devices/system/clocksource/clocksource0/available_clocksource
> > tsc hpet acpi_pm jiffies
> > [root@lpsdm52 ~]# cat /sys/devices/system/clocksource/clocksource0/current_clocksource
> > tsc
> > 
> > and on the DL380G4 running 2.6.24:
> > ---------------------------------------------------------
> > [root@lpsdm52 ~]# cat /sys/devices/system/clocksource/clocksource0/available_clocksource
> > hpet acpi_pm jiffies tsc
> > [root@lpsdm52 ~]# cat /sys/devices/system/clocksource/clocksource0/current_clocksource
> > hpet
> 
> So on 2.6.24 the TSC is declared unstable at some point and 2.6.25
> thinks it works fine. Is this the same kernel config (aside of the 24/25 fuzz) ?

I had a problem with my P4's tsc being declared unstable after S2R.  I
carry this patchlet (it's in mainline) in my 2.6.24 kernels to keep the
TSC operational.  (browsing, dunno if it's the same problem, but it
might be..)

diff --git a/arch/x86/kernel/tsc_sync.c b/arch/x86/kernel/tsc_sync.c
index 9125efe..05d8f25 100644
--- a/arch/x86/kernel/tsc_sync.c
+++ b/arch/x86/kernel/tsc_sync.c
@@ -129,24 +129,24 @@ void __cpuinit check_tsc_sync_source(int cpu)
 	while (atomic_read(&stop_count) != cpus-1)
 		cpu_relax();
 
-	/*
-	 * Reset it - just in case we boot another CPU later:
-	 */
-	atomic_set(&start_count, 0);
-
 	if (nr_warps) {
 		printk("\n");
 		printk(KERN_WARNING "Measured %Ld cycles TSC warp between CPUs,"
 				    " turning off TSC clock.\n", max_warp);
 		mark_tsc_unstable("check_tsc_sync_source failed");
-		nr_warps = 0;
-		max_warp = 0;
-		last_tsc = 0;
 	} else {
 		printk(" passed.\n");
 	}
 
 	/*
+	 * Reset it - just in case we boot another CPU later:
+	 */
+	atomic_set(&start_count, 0);
+	nr_warps = 0;
+	max_warp = 0;
+	last_tsc = 0;
+
+	/*
 	 * Let the target continue with the bootup:
 	 */
 	atomic_inc(&stop_count);


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/