Re: SCSI target subsystem

From: Vladislav Bolkhovitin
Date: Sun May 04 2008 - 11:23:00 EST


Vladislav Bolkhovitin wrote:
James Bottomley wrote:
On Fri, 2008-05-02 at 18:06 +0200, Bart Van Assche wrote:
James Bottomley clearly expressed in that thread that he doesn't want
to maintain two SCSI target frameworks. So what I propose is that SCST
is included in the mainline and afterwards that it is evaluated
whether or not it is desirable to keep other target code in the
mainline kernel.
That's hardly sufficient. STGT is already in use. Their either has to
be a migration path or, the preferred option, take the pieces of SCST
that are actual improvements and embed them in STGT.

Actually, between SCSI initiator and target subsystems there is almost *nothing* in common. This claim, at first glance, looks pretty wrong, because both serve SCSI, so they must have a lot common. But look deeper and you quickly find out that the majority of functionality as well as data they use are dedicated for each subsystem, not shared.

Just look at SCST/qla2x00t/(changes done in the initiator qla2xxx driver to support target mode, patch attached): 90% of changes is adding callbacks for external target add-on, the rest is support for older, than 2.6.17, kernels and sysfs magic. Note, no data are common between initiator and target parts in the meaning that they both use them.

Perhaps, I should elaborate more on this to eliminate possible misunderstanding. Of course, both main initiator driver and target add-on driver directly use the same hardware, so they share all internal hardware-related data, e.g. hardware_lock, but this doesn't matter for our topic, because this sharing is on the different level. All such data are hardware specific, hence different hardware have different sets of such data, hence it is impractical to find something common in them to expose as a common interface, which all initiator drivers should expose to its target add-ons: the interface would be more complicated than direct implementation in each particular case.

Then look at SCST (http://scst.sf.net). It implements complete pass-through SCSI support and look how it interacts with initiator SCSI subsystem. It calls only 2 functions: FIFO version of scsi_execute_async() (original scsi_execute_async() provides unacceptable LIFO commands order) and scsi_reset_provider() for task management. And there is only one common variable: struct scsi_device. That's all! In other storage modes (FILEIO/BLOCKIO) there is nothing common with SCSI initiator subsystem at all.

Finally, try to find out in SCST any duplicated functionality.

Now, let's look how SCSI target/initiator integration currently done in the kernel. For me it looks pretty artificial. For example, if I make a general purpose kernel, for which 1% of users would run target mode, I would have to enable as module "SCSI target support" as well as SCSI target support for transport attributes. Now 99% of users of my kernel, who don't need SCSI target, but need SCSI initiator drivers, would have to have scsi_tgt loaded, because transport attribute drivers would depend on it:

# lsmod
Module Size Used by
qla2xxx 130844 0
firmware_class 8064 1 qla2xxx
scsi_transport_fc 40900 1 qla2xxx
scsi_tgt 12196 1 scsi_transport_fc
brd 6924 0
xfs 511280 1
dm_mirror 24368 0
dm_mod 51148 1 dm_mirror
uhci_hcd 21400 0
sg 31784 0
e1000 114536 0
pcspkr 3328 0

No target functionality needed, but target mode subsystem is needed. Is it a good design?

I wrote all above to support my at first glance shocking conclusion that SCSI target subsystem is completely new subsystem of the kernel and it should live on its own with its own maintainer! This is the same as with the current interaction between SCSI and block subsystems in the kernel: SCSI uses block's functionality, but that doesn't mean that block and SCSI are the same subsystem.

Thus, how IMHO initiator and target drivers should be written:

- All initiator drivers should live in the SCSI initiator subsystem (aka current SCSI subsystem) only, the same as today.

- All target drivers should live in the SCSI target subsystem only and be either add-ons to initiator drivers, like, e.g., qla2x00t, or be a complete driver, like, e.g., iSCSI-SCST.

Vlad


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/