[PATCH] esp: Clean up to modern coding style
From: Alan Cox
Date: Tue Apr 29 2008 - 09:22:56 EST
Signed-off-by: Alan Cox <alan@xxxxxxxxxx>
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.25-mm1/drivers/char/esp.c linux-2.6.25-mm1/drivers/char/esp.c
--- linux.vanilla-2.6.25-mm1/drivers/char/esp.c 2008-04-28 11:36:48.000000000 +0100
+++ linux-2.6.25-mm1/drivers/char/esp.c 2008-04-18 16:24:42.000000000 +0100
@@ -8,7 +8,7 @@
* Extensively rewritten by Theodore Ts'o, 8/16/92 -- 9/14/92. Now
* much more extensible to support other serial cards based on the
* 16450/16550A UART's. Added support for the AST FourPort and the
- * Accent Async board.
+ * Accent Async board.
*
* set_serial_info fixed to set the flags, custom divisor, and uart
* type fields. Fix suggested by Michael K. Johnson 12/12/92.
@@ -61,11 +61,11 @@
#include <linux/bitops.h>
#include <asm/system.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <asm/dma.h>
#include <linux/slab.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
#include <linux/hayesesp.h>
@@ -127,8 +127,10 @@
#undef SERIAL_DEBUG_FLOW
#if defined(MODULE) && defined(SERIAL_DEBUG_MCOUNT)
-#define DBG_CNT(s) printk("(%s): [%x] refc=%d, serc=%d, ttyc=%d -> %s\n", \
- tty->name, (info->flags), serial_driver.refcount,info->count,tty->count,s)
+#define DBG_CNT(s) printk(KERN_DEBUG "(%s): [%x] refc=%d, serc=%d, ttyc=%d -> %s\n", \
+ tty->name, info->flags, \
+ serial_driver.refcount, \
+ info->count, tty->count, s)
#else
#define DBG_CNT(s)
#endif
@@ -189,7 +191,7 @@
*/
static void rs_stop(struct tty_struct *tty)
{
- struct esp_struct *info = (struct esp_struct *)tty->driver_data;
+ struct esp_struct *info = tty->driver_data;
unsigned long flags;
if (serial_paranoia_check(info, tty->name, "rs_stop"))
@@ -206,12 +208,12 @@
static void rs_start(struct tty_struct *tty)
{
- struct esp_struct *info = (struct esp_struct *)tty->driver_data;
+ struct esp_struct *info = tty->driver_data;
unsigned long flags;
-
+
if (serial_paranoia_check(info, tty->name, "rs_start"))
return;
-
+
spin_lock_irqsave(&info->lock, flags);
if (info->xmit_cnt && info->xmit_buf && !(info->IER & UART_IER_THRI)) {
info->IER |= UART_IER_THRI;
@@ -233,7 +235,7 @@
* rs_interrupt() should try to keep the interrupt handler as fast as
* possible. After you are done making modifications, it is not a bad
* idea to do:
- *
+ *
* gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c
*
* and look at the resulting assemble code in serial.s.
@@ -290,7 +292,7 @@
}
status_mask = (info->read_status_mask >> 2) & 0x07;
-
+
for (i = 0; i < num_bytes - 1; i += 2) {
*((unsigned short *)(pio_buf->data + i)) =
inw(info->port + UART_ESI_RX);
@@ -325,8 +327,7 @@
flag = TTY_BREAK;
if (info->flags & ASYNC_SAK)
do_SAK(tty);
- }
- else if (err_buf->data[i] & 0x02)
+ } else if (err_buf->data[i] & 0x02)
flag = TTY_FRAME;
else if (err_buf->data[i] & 0x01)
flag = TTY_PARITY;
@@ -341,23 +342,29 @@
release_pio_buffer(err_buf);
}
-static inline void receive_chars_dma(struct esp_struct *info, int num_bytes)
+static void program_isa_dma(int dma, int dir, unsigned long addr, int len)
{
unsigned long flags;
+
+ flags = claim_dma_lock();
+ disable_dma(dma);
+ clear_dma_ff(dma);
+ set_dma_mode(dma, dir);
+ set_dma_addr(dma, addr);
+ set_dma_count(dma, len);
+ enable_dma(dma);
+ release_dma_lock(flags);
+}
+
+static void receive_chars_dma(struct esp_struct *info, int num_bytes)
+{
info->stat_flags &= ~ESP_STAT_RX_TIMEOUT;
dma_bytes = num_bytes;
info->stat_flags |= ESP_STAT_DMA_RX;
-
- flags=claim_dma_lock();
- disable_dma(dma);
- clear_dma_ff(dma);
- set_dma_mode(dma, DMA_MODE_READ);
- set_dma_addr(dma, isa_virt_to_bus(dma_buffer));
- set_dma_count(dma, dma_bytes);
- enable_dma(dma);
- release_dma_lock(flags);
-
- serial_out(info, UART_ESI_CMD1, ESI_START_DMA_RX);
+
+ program_isa_dma(dma, DMA_MODE_READ, isa_virt_to_bus(dma_buffer),
+ dma_bytes);
+ serial_out(info, UART_ESI_CMD1, ESI_START_DMA_RX);
}
static inline void receive_chars_dma_done(struct esp_struct *info,
@@ -366,22 +373,22 @@
struct tty_struct *tty = info->tty;
int num_bytes;
unsigned long flags;
-
- flags=claim_dma_lock();
+
+ flags = claim_dma_lock();
disable_dma(dma);
clear_dma_ff(dma);
info->stat_flags &= ~ESP_STAT_DMA_RX;
num_bytes = dma_bytes - get_dma_residue(dma);
release_dma_lock(flags);
-
+
info->icount.rx += num_bytes;
if (num_bytes > 0) {
tty_insert_flip_string(tty, dma_buffer, num_bytes - 1);
status &= (0x1c & info->read_status_mask);
-
+
/* Is the status significant or do we throw the last byte ? */
if (!(status & info->ignore_status_mask)) {
int statflag = 0;
@@ -393,13 +400,13 @@
do_SAK(tty);
} else if (status & 0x08) {
statflag = TTY_FRAME;
- (info->icount.frame)++;
- }
- else if (status & 0x04) {
+ info->icount.frame++;
+ } else if (status & 0x04) {
statflag = TTY_PARITY;
- (info->icount.parity)++;
+ info->icount.parity++;
}
- tty_insert_flip_char(tty, dma_buffer[num_bytes - 1], statflag);
+ tty_insert_flip_char(tty, dma_buffer[num_bytes - 1],
+ statflag);
}
tty_schedule_flip(tty);
}
@@ -484,8 +491,6 @@
/* Caller must hold info->lock */
static inline void transmit_chars_dma(struct esp_struct *info, int num_bytes)
{
- unsigned long flags;
-
dma_bytes = num_bytes;
if (info->xmit_tail + dma_bytes <= ESP_XMIT_SIZE) {
@@ -517,26 +522,18 @@
}
info->stat_flags |= ESP_STAT_DMA_TX;
-
- flags=claim_dma_lock();
- disable_dma(dma);
- clear_dma_ff(dma);
- set_dma_mode(dma, DMA_MODE_WRITE);
- set_dma_addr(dma, isa_virt_to_bus(dma_buffer));
- set_dma_count(dma, dma_bytes);
- enable_dma(dma);
- release_dma_lock(flags);
-
- serial_out(info, UART_ESI_CMD1, ESI_START_DMA_TX);
+
+ program_isa_dma(dma, DMA_MODE_WRITE, isa_virt_to_bus(dma_buffer),
+ dma_bytes);
+ serial_out(info, UART_ESI_CMD1, ESI_START_DMA_TX);
}
static inline void transmit_chars_dma_done(struct esp_struct *info)
{
int num_bytes;
unsigned long flags;
-
- flags=claim_dma_lock();
+ flags = claim_dma_lock();
disable_dma(dma);
clear_dma_ff(dma);
@@ -547,27 +544,21 @@
if (dma_bytes != num_bytes) {
dma_bytes -= num_bytes;
memmove(dma_buffer, dma_buffer + num_bytes, dma_bytes);
-
- flags=claim_dma_lock();
- disable_dma(dma);
- clear_dma_ff(dma);
- set_dma_mode(dma, DMA_MODE_WRITE);
- set_dma_addr(dma, isa_virt_to_bus(dma_buffer));
- set_dma_count(dma, dma_bytes);
- enable_dma(dma);
- release_dma_lock(flags);
-
- serial_out(info, UART_ESI_CMD1, ESI_START_DMA_TX);
+
+ program_isa_dma(dma, DMA_MODE_WRITE,
+ isa_virt_to_bus(dma_buffer), dma_bytes);
+
+ serial_out(info, UART_ESI_CMD1, ESI_START_DMA_TX);
} else {
dma_bytes = 0;
info->stat_flags &= ~ESP_STAT_DMA_TX;
}
}
-static inline void check_modem_status(struct esp_struct *info)
+static void check_modem_status(struct esp_struct *info)
{
int status;
-
+
serial_out(info, UART_ESI_CMD1, ESI_GET_UART_STAT);
status = serial_in(info, UART_ESI_STAT2);
@@ -588,7 +579,7 @@
#if (defined(SERIAL_DEBUG_OPEN) || defined(SERIAL_DEBUG_INTR))
printk("ttys%d CD now %s...", info->line,
(status & UART_MSR_DCD) ? "on" : "off");
-#endif
+#endif
if (status & UART_MSR_DCD)
wake_up_interruptible(&info->open_wait);
else {
@@ -605,7 +596,7 @@
*/
static irqreturn_t rs_interrupt_single(int irq, void *dev_id)
{
- struct esp_struct * info;
+ struct esp_struct *info;
unsigned err_status;
unsigned int scratch;
@@ -617,7 +608,7 @@
scratch = serial_in(info, UART_ESI_SID);
spin_lock(&info->lock);
-
+
if (!info->tty) {
spin_unlock(&info->lock);
return IRQ_NONE;
@@ -637,7 +628,7 @@
if (err_status & 0x80) /* Start break */
wake_up_interruptible(&info->break_wait);
}
-
+
if ((scratch & 0x88) || /* DMA completed or timed out */
(err_status & 0x1c) /* receive error */) {
if (info->stat_flags & ESP_STAT_DMA_RX)
@@ -667,7 +658,7 @@
receive_chars_dma(info, num_bytes);
}
}
-
+
if (!(info->stat_flags & (ESP_STAT_DMA_RX | ESP_STAT_DMA_TX)) &&
(scratch & 0x02) && (info->IER & UART_IER_THRI)) {
if ((info->xmit_cnt <= 0) || info->tty->stopped) {
@@ -722,11 +713,11 @@
* ---------------------------------------------------------------
*/
-static inline void esp_basic_init(struct esp_struct * info)
+static void esp_basic_init(struct esp_struct *info)
{
/* put ESPC in enhanced mode */
serial_out(info, UART_ESI_CMD1, ESI_SET_MODE);
-
+
if (info->stat_flags & ESP_STAT_NEVER_DMA)
serial_out(info, UART_ESI_CMD2, 0x01);
else
@@ -783,13 +774,13 @@
serial_out(info, UART_ESI_CMD2, 0xff);
}
-static int startup(struct esp_struct * info)
+static int startup(struct esp_struct *info)
{
unsigned long flags;
- int retval=0;
- unsigned int num_chars;
+ int retval = 0;
+ unsigned int num_chars;
- spin_lock_irqsave(&info->lock, flags);
+ spin_lock_irqsave(&info->lock, flags);
if (info->flags & ASYNC_INITIALIZED)
goto out;
@@ -802,7 +793,8 @@
}
#ifdef SERIAL_DEBUG_OPEN
- printk("starting up ttys%d (irq %d)...", info->line, info->irq);
+ printk(KERN_DEBUG "starting up ttys%d (irq %d)...",
+ info->line, info->irq);
#endif
/* Flush the RX buffer. Using the ESI flush command may cause */
@@ -863,7 +855,7 @@
dma_buffer = NULL;
info->stat_flags |= ESP_STAT_USE_PIO;
}
-
+
}
info->MCR = UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2;
@@ -872,7 +864,7 @@
serial_out(info, UART_ESI_CMD1, ESI_WRITE_UART);
serial_out(info, UART_ESI_CMD2, UART_MCR);
serial_out(info, UART_ESI_CMD2, info->MCR);
-
+
/*
* Finally, enable interrupts
*/
@@ -881,7 +873,7 @@
UART_IER_DMA_TC;
serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK);
serial_out(info, UART_ESI_CMD2, info->IER);
-
+
if (info->tty)
clear_bit(TTY_IO_ERROR, &info->tty->flags);
info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
@@ -900,7 +892,7 @@
if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
info->tty->alt_speed = 460800;
}
-
+
/*
* set the speed of the serial port
*/
@@ -918,7 +910,7 @@
* This routine will shutdown a serial port; interrupts are disabled, and
* DTR is dropped if the hangup on close termio flag is on.
*/
-static void shutdown(struct esp_struct * info)
+static void shutdown(struct esp_struct *info)
{
unsigned long flags, f;
@@ -929,7 +921,7 @@
printk("Shutting down serial port %d (irq %d)....", info->line,
info->irq);
#endif
-
+
spin_lock_irqsave(&info->lock, flags);
/*
* clear delta_msr_wait queue to avoid mem leaks: we may free the irq
@@ -941,14 +933,14 @@
/* stop a DMA transfer on the port being closed */
/* DMA lock is higher priority always */
if (info->stat_flags & (ESP_STAT_DMA_RX | ESP_STAT_DMA_TX)) {
- f=claim_dma_lock();
+ f = claim_dma_lock();
disable_dma(dma);
clear_dma_ff(dma);
release_dma_lock(f);
-
+
dma_bytes = 0;
}
-
+
/*
* Free the IRQ
*/
@@ -970,7 +962,7 @@
free_pages((unsigned long)dma_buffer,
get_order(DMA_BUFFER_SZ));
dma_buffer = NULL;
- }
+ }
}
if (info->xmit_buf) {
@@ -992,7 +984,7 @@
if (info->tty)
set_bit(TTY_IO_ERROR, &info->tty->flags);
-
+
info->flags &= ~ASYNC_INITIALIZED;
spin_unlock_irqrestore(&info->lock, flags);
}
@@ -1005,7 +997,7 @@
{
unsigned short port;
int quot = 0;
- unsigned cflag,cval;
+ unsigned cflag, cval;
int baud, bits;
unsigned char flow1 = 0, flow2 = 0;
unsigned long flags;
@@ -1014,14 +1006,14 @@
return;
cflag = info->tty->termios->c_cflag;
port = info->port;
-
+
/* byte size and parity */
switch (cflag & CSIZE) {
- case CS5: cval = 0x00; bits = 7; break;
- case CS6: cval = 0x01; bits = 8; break;
- case CS7: cval = 0x02; bits = 9; break;
- case CS8: cval = 0x03; bits = 10; break;
- default: cval = 0x00; bits = 7; break;
+ case CS5: cval = 0x00; bits = 7; break;
+ case CS6: cval = 0x01; bits = 8; break;
+ case CS7: cval = 0x02; bits = 9; break;
+ case CS8: cval = 0x03; bits = 10; break;
+ default: cval = 0x00; bits = 7; break;
}
if (cflag & CSTOPB) {
cval |= 0x04;
@@ -1037,14 +1029,12 @@
if (cflag & CMSPAR)
cval |= UART_LCR_SPAR;
#endif
-
baud = tty_get_baud_rate(info->tty);
if (baud == 38400 &&
- ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST))
+ ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST))
quot = info->custom_divisor;
else {
- if (baud == 134)
- /* Special case since 134 is really 134.5 */
+ if (baud == 134) /* Special case since 134 is really 134.5 */
quot = (2*BASE_BAUD / 269);
else if (baud)
quot = BASE_BAUD / baud;
@@ -1052,7 +1042,12 @@
/* If the quotient is ever zero, default to 9600 bps */
if (!quot)
quot = BASE_BAUD / 9600;
-
+
+ if (baud) {
+ /* Actual rate */
+ baud = BASE_BAUD/quot;
+ tty_encode_baud_rate(info->tty, baud, baud);
+ }
info->timeout = ((1024 * HZ * bits * quot) / BASE_BAUD) + (HZ / 50);
/* CTS flow control flag and modem status interrupts */
@@ -1066,10 +1061,8 @@
info->flags &= ~ASYNC_CTS_FLOW;
if (cflag & CLOCAL)
info->flags &= ~ASYNC_CHECK_CD;
- else {
+ else
info->flags |= ASYNC_CHECK_CD;
- /* info->IER |= UART_IER_MSI; */
- }
/*
* Set up parity check flag
@@ -1079,7 +1072,7 @@
info->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
info->read_status_mask |= UART_LSR_BI;
-
+
info->ignore_status_mask = 0;
#if 0
/* This should be safe, but for some broken bits of hardware... */
@@ -1092,7 +1085,7 @@
info->ignore_status_mask |= UART_LSR_BI;
info->read_status_mask |= UART_LSR_BI;
/*
- * If we're ignore parity and break indicators, ignore
+ * If we're ignore parity and break indicators, ignore
* overruns too. (For real raw support).
*/
if (I_IGNPAR(info->tty)) {
@@ -1130,19 +1123,19 @@
serial_out(info, UART_ESI_CMD2, 0x10);
serial_out(info, UART_ESI_CMD2, 0x21);
switch (cflag & CSIZE) {
- case CS5:
- serial_out(info, UART_ESI_CMD2, 0x1f);
- break;
- case CS6:
- serial_out(info, UART_ESI_CMD2, 0x3f);
- break;
- case CS7:
- case CS8:
- serial_out(info, UART_ESI_CMD2, 0x7f);
- break;
- default:
- serial_out(info, UART_ESI_CMD2, 0xff);
- break;
+ case CS5:
+ serial_out(info, UART_ESI_CMD2, 0x1f);
+ break;
+ case CS6:
+ serial_out(info, UART_ESI_CMD2, 0x3f);
+ break;
+ case CS7:
+ case CS8:
+ serial_out(info, UART_ESI_CMD2, 0x7f);
+ break;
+ default:
+ serial_out(info, UART_ESI_CMD2, 0xff);
+ break;
}
}
@@ -1158,7 +1151,7 @@
static int rs_put_char(struct tty_struct *tty, unsigned char ch)
{
- struct esp_struct *info = (struct esp_struct *)tty->driver_data;
+ struct esp_struct *info = tty->driver_data;
unsigned long flags;
int ret = 0;
@@ -1181,9 +1174,9 @@
static void rs_flush_chars(struct tty_struct *tty)
{
- struct esp_struct *info = (struct esp_struct *)tty->driver_data;
+ struct esp_struct *info = tty->driver_data;
unsigned long flags;
-
+
if (serial_paranoia_check(info, tty->name, "rs_flush_chars"))
return;
@@ -1201,11 +1194,11 @@
spin_unlock_irqrestore(&info->lock, flags);
}
-static int rs_write(struct tty_struct * tty,
+static int rs_write(struct tty_struct *tty,
const unsigned char *buf, int count)
{
int c, t, ret = 0;
- struct esp_struct *info = (struct esp_struct *)tty->driver_data;
+ struct esp_struct *info = tty->driver_data;
unsigned long flags;
if (serial_paranoia_check(info, tty->name, "rs_write"))
@@ -1213,19 +1206,19 @@
if (!info->xmit_buf)
return 0;
-
+
while (1) {
/* Thanks to R. Wolff for suggesting how to do this with */
/* interrupts enabled */
c = count;
t = ESP_XMIT_SIZE - info->xmit_cnt - 1;
-
+
if (t < c)
c = t;
t = ESP_XMIT_SIZE - info->xmit_head;
-
+
if (t < c)
c = t;
@@ -1255,10 +1248,10 @@
static int rs_write_room(struct tty_struct *tty)
{
- struct esp_struct *info = (struct esp_struct *)tty->driver_data;
+ struct esp_struct *info = tty->driver_data;
int ret;
unsigned long flags;
-
+
if (serial_paranoia_check(info, tty->name, "rs_write_room"))
return 0;
@@ -1273,8 +1266,8 @@
static int rs_chars_in_buffer(struct tty_struct *tty)
{
- struct esp_struct *info = (struct esp_struct *)tty->driver_data;
-
+ struct esp_struct *info = tty->driver_data;
+
if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer"))
return 0;
return info->xmit_cnt;
@@ -1282,9 +1275,9 @@
static void rs_flush_buffer(struct tty_struct *tty)
{
- struct esp_struct *info = (struct esp_struct *)tty->driver_data;
+ struct esp_struct *info = tty->driver_data;
unsigned long flags;
-
+
if (serial_paranoia_check(info, tty->name, "rs_flush_buffer"))
return;
spin_lock_irqsave(&info->lock, flags);
@@ -1296,20 +1289,20 @@
/*
* ------------------------------------------------------------
* rs_throttle()
- *
+ *
* This routine is called by the upper-layer tty layer to signal that
* incoming characters should be throttled.
* ------------------------------------------------------------
*/
-static void rs_throttle(struct tty_struct * tty)
+static void rs_throttle(struct tty_struct *tty)
{
- struct esp_struct *info = (struct esp_struct *)tty->driver_data;
+ struct esp_struct *info = tty->driver_data;
unsigned long flags;
#ifdef SERIAL_DEBUG_THROTTLE
char buf[64];
-
+
printk("throttle %s: %d....\n", tty_name(tty, buf),
- tty->ldisc.chars_in_buffer(tty));
+ tty_chars_in_buffer(tty));
#endif
if (serial_paranoia_check(info, tty->name, "rs_throttle"))
@@ -1324,20 +1317,20 @@
spin_unlock_irqrestore(&info->lock, flags);
}
-static void rs_unthrottle(struct tty_struct * tty)
+static void rs_unthrottle(struct tty_struct *tty)
{
- struct esp_struct *info = (struct esp_struct *)tty->driver_data;
+ struct esp_struct *info = tty->driver_data;
unsigned long flags;
#ifdef SERIAL_DEBUG_THROTTLE
char buf[64];
-
- printk("unthrottle %s: %d....\n", tty_name(tty, buf),
- tty->ldisc.chars_in_buffer(tty));
+
+ printk(KERN_DEBUG "unthrottle %s: %d....\n", tty_name(tty, buf),
+ tty_chars_in_buffer(tty));
#endif
if (serial_paranoia_check(info, tty->name, "rs_unthrottle"))
return;
-
+
spin_lock_irqsave(&info->lock, flags);
info->IER |= UART_IER_RDI;
serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK);
@@ -1353,11 +1346,11 @@
* ------------------------------------------------------------
*/
-static int get_serial_info(struct esp_struct * info,
+static int get_serial_info(struct esp_struct *info,
struct serial_struct __user *retinfo)
{
struct serial_struct tmp;
-
+
lock_kernel();
memset(&tmp, 0, sizeof(tmp));
tmp.type = PORT_16550A;
@@ -1372,16 +1365,16 @@
tmp.custom_divisor = info->custom_divisor;
tmp.hub6 = 0;
unlock_kernel();
- if (copy_to_user(retinfo,&tmp,sizeof(*retinfo)))
+ if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
return -EFAULT;
return 0;
}
-static int get_esp_config(struct esp_struct * info,
+static int get_esp_config(struct esp_struct *info,
struct hayes_esp_config __user *retinfo)
{
struct hayes_esp_config tmp;
-
+
if (!retinfo)
return -EFAULT;
@@ -1399,7 +1392,7 @@
return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0;
}
-static int set_serial_info(struct esp_struct * info,
+static int set_serial_info(struct esp_struct *info,
struct serial_struct __user *new_info)
{
struct serial_struct new_serial;
@@ -1408,7 +1401,7 @@
int retval = 0;
struct esp_struct *current_async;
- if (copy_from_user(&new_serial,new_info,sizeof(new_serial)))
+ if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
return -EFAULT;
old_info = *info;
@@ -1429,7 +1422,7 @@
return -EINVAL;
if (!capable(CAP_SYS_ADMIN)) {
- if (change_irq ||
+ if (change_irq ||
(new_serial.close_delay != info->close_delay) ||
((new_serial.flags & ~ASYNC_USR_MASK) !=
(info->flags & ~ASYNC_USR_MASK)))
@@ -1514,8 +1507,8 @@
return retval;
}
-static int set_esp_config(struct esp_struct * info,
- struct hayes_esp_config __user * new_info)
+static int set_esp_config(struct esp_struct *info,
+ struct hayes_esp_config __user *new_info)
{
struct hayes_esp_config new_config;
unsigned int change_dma;
@@ -1557,7 +1550,6 @@
if (new_config.dma_channel) {
/* PIO mode to DMA mode transition OR */
/* change current DMA channel */
-
current_async = ports;
while (current_async) {
@@ -1566,16 +1558,15 @@
return -EBUSY;
} else if (current_async->count)
return -EBUSY;
-
- current_async =
- current_async->next_port;
+
+ current_async = current_async->next_port;
}
shutdown(info);
dma = new_config.dma_channel;
info->stat_flags &= ~ESP_STAT_NEVER_DMA;
-
- /* all ports must use the same DMA channel */
+
+ /* all ports must use the same DMA channel */
spin_lock_irqsave(&info->lock, flags);
current_async = ports;
@@ -1587,7 +1578,6 @@
spin_unlock_irqrestore(&info->lock, flags);
} else {
/* DMA mode to PIO mode only */
-
if (info->count > 1)
return -EBUSY;
@@ -1658,9 +1648,9 @@
* release the bus after transmitting. This must be done when
* the transmit shift register is empty, not be done when the
* transmit holding register is empty. This functionality
- * allows an RS485 driver to be written in user space.
+ * allows an RS485 driver to be written in user space.
*/
-static int get_lsr_info(struct esp_struct * info, unsigned int __user *value)
+static int get_lsr_info(struct esp_struct *info, unsigned int __user *value)
{
unsigned char status;
unsigned int result;
@@ -1671,13 +1661,13 @@
status = serial_in(info, UART_ESI_STAT1);
spin_unlock_irqrestore(&info->lock, flags);
result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0);
- return put_user(result,value);
+ return put_user(result, value);
}
static int esp_tiocmget(struct tty_struct *tty, struct file *file)
{
- struct esp_struct * info = (struct esp_struct *)tty->driver_data;
+ struct esp_struct *info = tty->driver_data;
unsigned char control, status;
unsigned long flags;
@@ -1704,7 +1694,7 @@
static int esp_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear)
{
- struct esp_struct * info = (struct esp_struct *)tty->driver_data;
+ struct esp_struct *info = tty->driver_data;
unsigned long flags;
if (serial_paranoia_check(info, tty->name, __func__))
@@ -1737,9 +1727,9 @@
*/
static void esp_break(struct tty_struct *tty, int break_state)
{
- struct esp_struct * info = (struct esp_struct *)tty->driver_data;
+ struct esp_struct *info = tty->driver_data;
unsigned long flags;
-
+
if (serial_paranoia_check(info, tty->name, "esp_break"))
return;
@@ -1759,10 +1749,10 @@
}
}
-static int rs_ioctl(struct tty_struct *tty, struct file * file,
+static int rs_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
- struct esp_struct * info = (struct esp_struct *)tty->driver_data;
+ struct esp_struct *info = tty->driver_data;
struct async_icount cprev, cnow; /* kernel counter temps */
struct serial_icounter_struct __user *p_cuser; /* user space */
void __user *argp = (void __user *)arg;
@@ -1780,102 +1770,93 @@
if (tty->flags & (1 << TTY_IO_ERROR))
return -EIO;
}
-
- switch (cmd) {
- case TIOCGSERIAL:
- return get_serial_info(info, argp);
- case TIOCSSERIAL:
- lock_kernel();
- ret = set_serial_info(info, argp);
- unlock_kernel();
- return ret;
- case TIOCSERCONFIG:
- /* do not reconfigure after initial configuration */
- return 0;
-
- case TIOCSERGWILD:
- return put_user(0L, (unsigned long __user *)argp);
- case TIOCSERGETLSR: /* Get line status register */
- return get_lsr_info(info, argp);
-
- case TIOCSERSWILD:
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
- return 0;
-
- /*
- * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
- * - mask passed in arg for lines of interest
- * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
- * Caller should use TIOCGICOUNT to see which one it was
- */
- case TIOCMIWAIT:
+ switch (cmd) {
+ case TIOCGSERIAL:
+ return get_serial_info(info, argp);
+ case TIOCSSERIAL:
+ lock_kernel();
+ ret = set_serial_info(info, argp);
+ unlock_kernel();
+ return ret;
+ case TIOCSERGWILD:
+ return put_user(0L, (unsigned long __user *)argp);
+ case TIOCSERGETLSR: /* Get line status register */
+ return get_lsr_info(info, argp);
+ case TIOCSERSWILD:
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ return 0;
+ /*
+ * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
+ * - mask passed in arg for lines of interest
+ * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
+ * Caller should use TIOCGICOUNT to see which one it was
+ */
+ case TIOCMIWAIT:
+ spin_lock_irqsave(&info->lock, flags);
+ cprev = info->icount; /* note the counters on entry */
+ spin_unlock_irqrestore(&info->lock, flags);
+ while (1) {
+ /* FIXME: convert to new style wakeup */
+ interruptible_sleep_on(&info->delta_msr_wait);
+ /* see if a signal did it */
+ if (signal_pending(current))
+ return -ERESTARTSYS;
spin_lock_irqsave(&info->lock, flags);
- cprev = info->icount; /* note the counters on entry */
+ cnow = info->icount; /* atomic copy */
spin_unlock_irqrestore(&info->lock, flags);
- while (1) {
- /* FIXME: convert to new style wakeup */
- interruptible_sleep_on(&info->delta_msr_wait);
- /* see if a signal did it */
- if (signal_pending(current))
- return -ERESTARTSYS;
- spin_lock_irqsave(&info->lock, flags);
- cnow = info->icount; /* atomic copy */
- spin_unlock_irqrestore(&info->lock, flags);
- if (cnow.rng == cprev.rng &&
- cnow.dsr == cprev.dsr &&
- cnow.dcd == cprev.dcd &&
- cnow.cts == cprev.cts)
- return -EIO; /* no change => error */
- if (((arg & TIOCM_RNG) &&
- (cnow.rng != cprev.rng)) ||
- ((arg & TIOCM_DSR) &&
- (cnow.dsr != cprev.dsr)) ||
- ((arg & TIOCM_CD) &&
- (cnow.dcd != cprev.dcd)) ||
- ((arg & TIOCM_CTS) &&
- (cnow.cts != cprev.cts)) ) {
- return 0;
- }
- cprev = cnow;
+ if (cnow.rng == cprev.rng &&
+ cnow.dsr == cprev.dsr &&
+ cnow.dcd == cprev.dcd &&
+ cnow.cts == cprev.cts)
+ return -EIO; /* no change => error */
+ if (((arg & TIOCM_RNG) &&
+ (cnow.rng != cprev.rng)) ||
+ ((arg & TIOCM_DSR) &&
+ (cnow.dsr != cprev.dsr)) ||
+ ((arg & TIOCM_CD) &&
+ (cnow.dcd != cprev.dcd)) ||
+ ((arg & TIOCM_CTS) &&
+ (cnow.cts != cprev.cts))) {
+ return 0;
}
- /* NOTREACHED */
-
- /*
- * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
- * Return: write counters to the user passed counter struct
- * NB: both 1->0 and 0->1 transitions are counted except for
- * RI where only 0->1 is counted.
- */
- case TIOCGICOUNT:
- spin_lock_irqsave(&info->lock, flags);
- cnow = info->icount;
- spin_unlock_irqrestore(&info->lock, flags);
- p_cuser = argp;
- if (put_user(cnow.cts, &p_cuser->cts) ||
- put_user(cnow.dsr, &p_cuser->dsr) ||
- put_user(cnow.rng, &p_cuser->rng) ||
- put_user(cnow.dcd, &p_cuser->dcd))
- return -EFAULT;
-
- return 0;
- case TIOCGHAYESESP:
- return get_esp_config(info, argp);
- case TIOCSHAYESESP:
- lock_kernel();
- ret = set_esp_config(info, argp);
- unlock_kernel();
- return ret;
- default:
- return -ENOIOCTLCMD;
+ cprev = cnow;
}
+ /* NOTREACHED */
+ /*
+ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+ * Return: write counters to the user passed counter struct
+ * NB: both 1->0 and 0->1 transitions are counted except for
+ * RI where only 0->1 is counted.
+ */
+ case TIOCGICOUNT:
+ spin_lock_irqsave(&info->lock, flags);
+ cnow = info->icount;
+ spin_unlock_irqrestore(&info->lock, flags);
+ p_cuser = argp;
+ if (put_user(cnow.cts, &p_cuser->cts) ||
+ put_user(cnow.dsr, &p_cuser->dsr) ||
+ put_user(cnow.rng, &p_cuser->rng) ||
+ put_user(cnow.dcd, &p_cuser->dcd))
+ return -EFAULT;
+ return 0;
+ case TIOCGHAYESESP:
+ return get_esp_config(info, argp);
+ case TIOCSHAYESESP:
+ lock_kernel();
+ ret = set_esp_config(info, argp);
+ unlock_kernel();
+ return ret;
+ default:
+ return -ENOIOCTLCMD;
+ }
return 0;
}
static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
- struct esp_struct *info = (struct esp_struct *)tty->driver_data;
+ struct esp_struct *info = tty->driver_data;
unsigned long flags;
change_speed(info);
@@ -1912,32 +1893,33 @@
/*
* ------------------------------------------------------------
* rs_close()
- *
+ *
* This routine is called when the serial port gets closed. First, we
* wait for the last remaining data to be sent. Then, we unlink its
* async structure from the interrupt chain if necessary, and we free
* that IRQ if nothing is left in the chain.
* ------------------------------------------------------------
*/
-static void rs_close(struct tty_struct *tty, struct file * filp)
+static void rs_close(struct tty_struct *tty, struct file *filp)
{
- struct esp_struct * info = (struct esp_struct *)tty->driver_data;
+ struct esp_struct *info = tty->driver_data;
unsigned long flags;
if (!info || serial_paranoia_check(info, tty->name, "rs_close"))
return;
-
+
spin_lock_irqsave(&info->lock, flags);
-
+
if (tty_hung_up_p(filp)) {
DBG_CNT("before DEC-hung");
goto out;
}
-
+
#ifdef SERIAL_DEBUG_OPEN
- printk("rs_close ttys%d, count = %d\n", info->line, info->count);
+ printk(KERN_DEBUG "rs_close ttys%d, count = %d\n",
+ info->line, info->count);
#endif
- if ((tty->count == 1) && (info->count != 1)) {
+ if (tty->count == 1 && info->count != 1) {
/*
* Uh, oh. tty->count is 1, which means that the tty
* structure will be freed. Info->count should always
@@ -1945,12 +1927,11 @@
* one, we've got real problems, since it means the
* serial port won't be shutdown.
*/
- printk("rs_close: bad serial port count; tty->count is 1, "
- "info->count is %d\n", info->count);
+ printk(KERN_DEBUG "rs_close: bad serial port count; tty->count is 1, info->count is %d\n", info->count);
info->count = 1;
}
if (--info->count < 0) {
- printk("rs_close: bad serial port count for ttys%d: %d\n",
+ printk(KERN_ERR "rs_close: bad serial port count for ttys%d: %d\n",
info->line, info->count);
info->count = 0;
}
@@ -1962,7 +1943,7 @@
spin_unlock_irqrestore(&info->lock, flags);
/*
- * Now we wait for the transmit buffer to clear; and we notify
+ * Now we wait for the transmit buffer to clear; and we notify
* the line discipline to only process XON/XOFF characters.
*/
tty->closing = 1;
@@ -2003,9 +1984,8 @@
info->tty = NULL;
if (info->blocked_open) {
- if (info->close_delay) {
+ if (info->close_delay)
msleep_interruptible(jiffies_to_msecs(info->close_delay));
- }
wake_up_interruptible(&info->open_wait);
}
info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
@@ -2018,7 +1998,7 @@
static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
{
- struct esp_struct *info = (struct esp_struct *)tty->driver_data;
+ struct esp_struct *info = tty->driver_data;
unsigned long orig_jiffies, char_time;
unsigned long flags;
@@ -2060,11 +2040,11 @@
*/
static void esp_hangup(struct tty_struct *tty)
{
- struct esp_struct * info = (struct esp_struct *)tty->driver_data;
-
+ struct esp_struct *info = tty->driver_data;
+
if (serial_paranoia_check(info, tty->name, "esp_hangup"))
return;
-
+
rs_flush_buffer(tty);
shutdown(info);
info->count = 0;
@@ -2078,7 +2058,7 @@
* esp_open() and friends
* ------------------------------------------------------------
*/
-static int block_til_ready(struct tty_struct *tty, struct file * filp,
+static int block_til_ready(struct tty_struct *tty, struct file *filp,
struct esp_struct *info)
{
DECLARE_WAITQUEUE(wait, current);
@@ -2127,11 +2107,11 @@
retval = 0;
add_wait_queue(&info->open_wait, &wait);
#ifdef SERIAL_DEBUG_OPEN
- printk("block_til_ready before block: ttys%d, count = %d\n",
+ printk(KERN_DEBUG "block_til_ready before block: ttys%d, count = %d\n",
info->line, info->count);
#endif
spin_lock_irqsave(&info->lock, flags);
- if (!tty_hung_up_p(filp))
+ if (!tty_hung_up_p(filp))
info->count--;
info->blocked_open++;
while (1) {
@@ -2153,7 +2133,7 @@
if (info->flags & ASYNC_HUP_NOTIFY)
retval = -EAGAIN;
else
- retval = -ERESTARTSYS;
+ retval = -ERESTARTSYS;
#else
retval = -EAGAIN;
#endif
@@ -2172,7 +2152,7 @@
break;
}
#ifdef SERIAL_DEBUG_OPEN
- printk("block_til_ready blocking: ttys%d, count = %d\n",
+ printk(KERN_DEBUG "block_til_ready blocking: ttys%d, count = %d\n",
info->line, info->count);
#endif
spin_unlock_irqrestore(&info->lock, flags);
@@ -2186,14 +2166,14 @@
info->blocked_open--;
spin_unlock_irqrestore(&info->lock, flags);
#ifdef SERIAL_DEBUG_OPEN
- printk("block_til_ready after blocking: ttys%d, count = %d\n",
+ printk(KERN_DEBUG "block_til_ready after blocking: ttys%d, count = %d\n",
info->line, info->count);
#endif
if (retval)
return retval;
info->flags |= ASYNC_NORMAL_ACTIVE;
return 0;
-}
+}
/*
* This routine is called whenever a serial port is opened. It
@@ -2201,7 +2181,7 @@
* the IRQ chain. It also performs the serial-specific
* initialization for the tty structure.
*/
-static int esp_open(struct tty_struct *tty, struct file * filp)
+static int esp_open(struct tty_struct *tty, struct file *filp)
{
struct esp_struct *info;
int retval, line;
@@ -2224,7 +2204,7 @@
}
#ifdef SERIAL_DEBUG_OPEN
- printk("esp_open %s, count = %d\n", tty->name, info->count);
+ printk(KERN_DEBUG "esp_open %s, count = %d\n", tty->name, info->count);
#endif
spin_lock_irqsave(&info->lock, flags);
info->count++;
@@ -2232,7 +2212,7 @@
info->tty = tty;
spin_unlock_irqrestore(&info->lock, flags);
-
+
/*
* Start up serial port
*/
@@ -2243,14 +2223,13 @@
retval = block_til_ready(tty, filp, info);
if (retval) {
#ifdef SERIAL_DEBUG_OPEN
- printk("esp_open returning after block_til_ready with %d\n",
+ printk(KERN_DEBUG "esp_open returning after block_til_ready with %d\n",
retval);
#endif
return retval;
}
-
#ifdef SERIAL_DEBUG_OPEN
- printk("esp_open %s successful...", tty->name);
+ printk(KERN_DEBUG "esp_open %s successful...", tty->name);
#endif
return 0;
}
@@ -2268,10 +2247,10 @@
* number, and identifies which options were configured into this
* driver.
*/
-
-static inline void show_serial_version(void)
+
+static void show_serial_version(void)
{
- printk(KERN_INFO "%s version %s (DMA %u)\n",
+ printk(KERN_INFO "%s version %s (DMA %u)\n",
serial_name, serial_version, dma);
}
@@ -2279,7 +2258,7 @@
* This routine is called by espserial_init() to initialize a specific serial
* port.
*/
-static inline int autoconfig(struct esp_struct * info)
+static int autoconfig(struct esp_struct *info)
{
int port_detected = 0;
unsigned long flags;
@@ -2355,14 +2334,14 @@
static int __init espserial_init(void)
{
int i, offset;
- struct esp_struct * info;
+ struct esp_struct *info;
struct esp_struct *last_primary = NULL;
- int esp[] = {0x100,0x140,0x180,0x200,0x240,0x280,0x300,0x380};
+ int esp[] = { 0x100, 0x140, 0x180, 0x200, 0x240, 0x280, 0x300, 0x380 };
esp_driver = alloc_tty_driver(NR_PORTS);
if (!esp_driver)
return -ENOMEM;
-
+
for (i = 0; i < NR_PRIMARY; i++) {
if (irq[i] != 0) {
if ((irq[i] < 2) || (irq[i] > 15) || (irq[i] == 6) ||
@@ -2384,20 +2363,20 @@
if ((flow_off < 1) || (flow_off > 1023))
flow_off = 1016;
-
+
if ((flow_on < 1) || (flow_on > 1023))
flow_on = 944;
if ((rx_timeout < 0) || (rx_timeout > 255))
rx_timeout = 128;
-
+
if (flow_on >= flow_off)
flow_on = flow_off - 1;
show_serial_version();
/* Initialize the tty_driver structure */
-
+
esp_driver->owner = THIS_MODULE;
esp_driver->name = "ttyP";
esp_driver->major = ESP_IN_MAJOR;
@@ -2407,10 +2386,11 @@
esp_driver->init_termios = tty_std_termios;
esp_driver->init_termios.c_cflag =
B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ esp_driver->init_termios.c_ispeed = 9600;
+ esp_driver->init_termios.c_ospeed = 9600;
esp_driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(esp_driver, &esp_ops);
- if (tty_register_driver(esp_driver))
- {
+ if (tty_register_driver(esp_driver)) {
printk(KERN_ERR "Couldn't register esp serial driver");
put_tty_driver(esp_driver);
return 1;
@@ -2418,8 +2398,7 @@
info = kzalloc(sizeof(struct esp_struct), GFP_KERNEL);
- if (!info)
- {
+ if (!info) {
printk(KERN_ERR "Couldn't allocate memory for esp serial device information\n");
tty_unregister_driver(esp_driver);
put_tty_driver(esp_driver);
@@ -2482,10 +2461,8 @@
info->stat_flags |= ESP_STAT_NEVER_DMA;
info = kzalloc(sizeof(struct esp_struct), GFP_KERNEL);
- if (!info)
- {
- printk(KERN_ERR "Couldn't allocate memory for esp serial device information\n");
-
+ if (!info) {
+ printk(KERN_ERR "Couldn't allocate memory for esp serial device information\n");
/* allow use of the already detected ports */
return 0;
}
@@ -2509,22 +2486,20 @@
return 0;
}
-static void __exit espserial_exit(void)
+static void __exit espserial_exit(void)
{
int e1;
struct esp_struct *temp_async;
struct esp_pio_buffer *pio_buf;
- /* printk("Unloading %s: version %s\n", serial_name, serial_version); */
- if ((e1 = tty_unregister_driver(esp_driver)))
- printk("SERIAL: failed to unregister serial driver (%d)\n",
- e1);
+ e1 = tty_unregister_driver(esp_driver);
+ if (e1)
+ printk(KERN_ERR "esp: failed to unregister driver (%d)\n", e1);
put_tty_driver(esp_driver);
while (ports) {
- if (ports->port) {
+ if (ports->port)
release_region(ports->port, REGION_SIZE);
- }
temp_async = ports->next_port;
kfree(ports);
ports = temp_async;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/