Re: [PATCH 1/1] Input/Joystick Driver: add support AD7142 joystick driver (v2)

[Bryan Wu]

On Sat, Apr 19, 2008 at 1:15 AM, Dmitry Torokhov
<dmitry.torokhov@xxxxxxxxx> wrote:
> Hi Bryan,
>
>
>  On Thu, Mar 27, 2008 at 11:38:30AM -0700, Bryan Wu wrote:
>  > +     input->keybit[BIT_WORD(BTN_BASE)] = BIT_MASK(BTN_BASE) |
>  > +                                             BIT_MASK(BTN_BASE2) |
>  > +                                             BIT_MASK(BTN_BASE3) |
>  > +                                             BIT_MASK(BTN_BASE4);
>  > +     input->keybit[BIT_WORD(KEY_UP)] |=  BIT_MASK(KEY_UP) |
>  > +                                             BIT_MASK(KEY_DOWN) |
>  > +                                             BIT_MASK(KEY_LEFT) |
>  > +                                             BIT_MASK(KEY_RIGHT);
>  > +
>
>  Why don't you use REL_X/REL_Y to report directional movement? Using
>  buttons for that is pretty unusual.
>

In our development board, it includes UP/DOWN/LEFT/RIGHT 4 buttons. So
this driver matches this.
Please found some information about the hardware as below:
http://docs.blackfin.uclinux.org/doku.php?id=capacitance_touch_sensors&s[]=ad7142

Thanks
-Bryan
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/