Re: [2.6 patch] select ATA_SFF
From: Sergei Shtylyov
Date: Tue Apr 22 2008 - 09:11:47 EST
Hello.
Adrian Bunk wrote:
Making ATA_SFF a user-visible option with the drivers needing it
depending on it caused the following problems:
- people lose their driver when accidentally disabling it
- people not requiring it needlessly enable it
Fortunately, we don't have to bother the user with this option at all
since we can simply select it when it's required.
Signed-off-by: Adrian Bunk <bunk@xxxxxxxxxx>
[...]
@@ -132,6 +119,7 @@ config SATA_NV
config PDC_ADMA
tristate "Pacific Digital ADMA support"
depends on PCI
+ select ATA_SFF
help
This option enables support for Pacific Digital ADMA controllers
ADMA is not SFF-8038i compilant, it's the IDE DMA spec of its own. And I'm
seeing references to libata-sff.c... confusing.
@@ -248,6 +249,7 @@ config PATA_ARTOP
config PATA_AT32
tristate "Atmel AVR32 PATA support (Experimental)"
depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL
+ select ATA_SFF
help
This option enables support for the IDE devices on the
Atmel AT32AP platform.
I'm seeing no DMA support here... yet there are calls to
@@ -266,6 +269,7 @@ config PATA_ATIIXP
config PATA_CMD640_PCI
tristate "CMD640 PCI PATA support (Very Experimental)"
depends on PCI && EXPERIMENTAL
+ select ATA_SFF
help
This option enables support for the CMD640 PCI IDE
interface chip. Only the primary channel is currently
PIO only chip... yet its driver seems to call libata-sff.c...
@@ -285,6 +290,7 @@ config PATA_CMD64X
config PATA_CS5520
tristate "CS5510/5520 PATA support"
depends on PCI
+ select ATA_SFF
help
This option enables support for the Cyrix 5510/5520
companion chip used with the MediaGX/Geode processor family.
These chips are PIO only. Yet the driver calls libata-sff.c, hm...
@@ -375,6 +390,7 @@ config PATA_HPT3X2N
config PATA_HPT3X3
tristate "HPT 343/363 PATA support"
depends on PCI
+ select ATA_SFF
help
This option enables support for the HPT 343/363
PATA controllers via the new ATA layer
@@ -384,6 +400,7 @@ config PATA_HPT3X3
config PATA_HPT3X3_DMA
bool "HPT 343/363 DMA support (Experimental)"
depends on PATA_HPT3X3
+ select ATA_SFF
I don't think this 'select' is needed, since it's not on option that
enables the driver itself, just DMA support in it.
help
This option enables DMA support for the HPT343/363
controllers. Enable with care as there are still some
@@ -392,6 +409,7 @@ config PATA_HPT3X3_DMA
config PATA_ISAPNP
tristate "ISA Plug and Play PATA support (Experimental)"
depends on EXPERIMENTAL && ISAPNP
+ select ATA_SFF
help
This option enables support for ISA plug & play ATA
controllers such as those found on old soundcards.
PnP IDE is not SFF-8038i compliant, and not DMA capable, IIUC.
@@ -429,6 +450,7 @@ config PATA_JMICRON
config PATA_LEGACY
tristate "Legacy ISA PATA support (Experimental)"
depends on ISA && EXPERIMENTAL
+ select ATA_SFF
help
This option enables support for ISA/VLB bus legacy PATA
ports and allows them to be accessed via the new ATA layer.
PIO only driver, no SFF-8038i stuff... but calls libata-sff.c, hm...
@@ -456,6 +480,7 @@ config PATA_MARVELL
config PATA_MPC52xx
tristate "Freescale MPC52xx SoC internal IDE"
depends on PPC_MPC52xx
+ select ATA_SFF
help
This option enables support for integrated IDE controller
of the Freescale MPC52xx SoC.
DMA is not SFF-8038i compliant -- however it calls libata-sff.c...
@@ -465,6 +490,7 @@ config PATA_MPC52xx
config PATA_MPIIX
tristate "Intel PATA MPIIX support"
depends on PCI
+ select ATA_SFF
help
This option enables support for MPIIX PATA support.
PIO only, no SFF-8038i compliant registers. Yet it calls liabat-sff.c...
@@ -490,6 +518,7 @@ config PATA_NETCELL
config PATA_NINJA32
tristate "Ninja32/Delkin Cardbus ATA support (Experimental)"
depends on PCI && EXPERIMENTAL
+ select ATA_SFF
help
This option enables support for the Ninja32, Delkin and
possibly other brands of Cardbus ATA adapter
BMDMA here is not SFF-8038i compatible. Uses libata-sff.c though, it seems...
@@ -499,6 +528,7 @@ config PATA_NINJA32
config PATA_NS87410
tristate "Nat Semi NS87410 PATA support (Experimental)"
depends on PCI && EXPERIMENTAL
+ select ATA_SFF
help
This option enables support for the National Semiconductor
NS87410 PCI-IDE controller.
PIO only driver, no SFF-8038i compatible registers. Seems to be calling
libata-sff.c though...
@@ -517,6 +548,7 @@ config PATA_NS87415
config PATA_OPTI
tristate "OPTI621/6215 PATA support (Very Experimental)"
depends on PCI && EXPERIMENTAL
+ select ATA_SFF
help
This option enables full PIO support for the early Opti ATA
controllers found on some old motherboards.
PIO only driver, not SFF-8038i compliant. Seems to be calling libata-sff.c...
@@ -536,6 +569,7 @@ config PATA_OPTIDMA
config PATA_PCMCIA
tristate "PCMCIA PATA support"
depends on PCMCIA
+ select ATA_SFF
help
This option enables support for PCMCIA ATA interfaces, including
compact flash card adapters via the new ATA layer.
PCMCIA driver is PIO only, not SFF-8038i "by definition" since it's not
PCI. Yet seems to call libab-sff.c...
@@ -554,12 +589,14 @@ config PATA_PDC_OLD
config PATA_QDI
tristate "QDI VLB PATA support"
depends on ISA
+ select ATA_SFF
help
Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
QDI6580 is VLB PIO only driver -- therefore not SFF-8038i compliant.
@@ -578,6 +616,7 @@ config PATA_RB500
config PATA_RZ1000
tristate "PC Tech RZ1000 PATA support"
depends on PCI
+ select ATA_SFF
help
This option enables basic support for the PC Tech RZ1000/1
PATA controllers via the new ATA layer
RZ1000 is PIO only, IIRC -- no SFF-8038i registers.
@@ -647,6 +693,7 @@ config PATA_WINBOND
config PATA_WINBOND_VLB
tristate "Winbond W83759A VLB PATA support (Experimental)"
depends on ISA && EXPERIMENTAL
+ select ATA_SFF
help
Support for the Winbond W83759A controller on Vesa Local Bus
systems.
This is VLB PIO only driver -- no SFF-8038i. Seems to call libata-sff.c
though...
@@ -673,6 +722,7 @@ config PATA_OF_PLATFORM
config PATA_ICSIDE
tristate "Acorn ICS PATA support"
depends on ARM && ARCH_ACORN
+ select ATA_SFF
help
On Acorn systems, say Y here if you wish to use the ICS PATA
interface card. This is not required for ICS partition support.
ICS is not SFF-8038i compliant. However it calls libata-sff.c... go figure.
@@ -691,6 +742,7 @@ config PATA_IXP4XX_CF
config PATA_SCC
tristate "Toshiba's Cell Reference Set IDE support"
depends on PCI && PPC_CELLEB
+ select ATA_SFF
SCC PATA is not SFF-8038i compliant. Seem to calls libata-sff.c however...
help
This option enables support for the built-in IDE controller on
Toshiba Cell Reference Board.
Looks like there's no clean separation within libata-sff.c itself between
SFF-8038i (BMDMA spec) and IDE registers itself -- that confused me: at first
I thought there's a big issue with a patch. :-/
Jeff, Tejun, what "sff" in the file name actually means? Isn't it strange
that the drivers lacking DMA support or not really compliant with SFF-8038i
have to link with this file?
MBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/