[git patches] net driver fixes
From: Jeff Garzik
Date: Wed Mar 05 2008 - 07:39:45 EST
Note - The #upstream branch of netdev-2.5.git will be getting pushed to
net-2.6.26.git soon. That's where I've been keeping my for-2.6.26
stuff.
Please pull from 'upstream-davem' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git upstream-davem
to receive the following updates:
MAINTAINERS | 32 ++++----------------------------
drivers/net/Kconfig | 2 +-
drivers/net/atarilance.c | 5 ++---
drivers/net/e100.c | 29 +++--------------------------
drivers/net/ixgbe/ixgbe_main.c | 2 +-
drivers/net/mv643xx_eth.c | 1 +
drivers/net/pcmcia/axnet_cs.c | 2 +-
drivers/net/phy/Kconfig | 1 +
drivers/net/phy/davicom.c | 17 ++++++++++++++---
drivers/net/s2io.c | 2 +-
drivers/net/tulip/de2104x.c | 3 ++-
11 files changed, 31 insertions(+), 65 deletions(-)
Adrian Bunk (3):
fix drivers/net/atarilance.c compilation
FIXED_PHY must depend on PHYLIB=y
make s2io.c:init_tti() static
Auke Kok (2):
e100: Do suspend/shutdown like e1000
Intel ethernet adapter: Update MAINTAINERS
Emil Tantilov (1):
ixgbe: fix typo in speed mesage
Komuro (1):
axnet_cs: change debugging level for "Too much work at interrupt" message.
Martin Michlmayr (1):
mv643xx_eth: Define module alias for platform device
Ondrej Zary (1):
de2104x: remove BUG_ON() when changing media type
Thomas Klein (1):
ehea: Fix missing Kconfig dependency
frederic Rodo (1):
dm9161: add configuration for MII/RMII
diff --git a/MAINTAINERS b/MAINTAINERS
index 33d99dc..93e0de9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2039,43 +2039,19 @@ M: kernel@xxxxxxxxxxxxxx
L: netdev@xxxxxxxxxxxxxxx
S: Maintained
-INTEL PRO/100 ETHERNET SUPPORT
+INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/ixgb/ixgbe)
P: Auke Kok
M: auke-jan.h.kok@xxxxxxxxx
P: Jesse Brandeburg
M: jesse.brandeburg@xxxxxxxxx
P: Jeff Kirsher
M: jeffrey.t.kirsher@xxxxxxxxx
+P: Bruce Allan
+M: bruce.w.allan@xxxxxxxxx
P: John Ronciak
M: john.ronciak@xxxxxxxxx
L: e1000-devel@xxxxxxxxxxxxxxxxxxxxx
-W: http://sourceforge.net/projects/e1000/
-S: Supported
-
-INTEL PRO/1000 GIGABIT ETHERNET SUPPORT
-P: Auke Kok
-M: auke-jan.h.kok@xxxxxxxxx
-P: Jesse Brandeburg
-M: jesse.brandeburg@xxxxxxxxx
-P: Jeff Kirsher
-M: jeffrey.t.kirsher@xxxxxxxxx
-P: John Ronciak
-M: john.ronciak@xxxxxxxxx
-L: e1000-devel@xxxxxxxxxxxxxxxxxxxxx
-W: http://sourceforge.net/projects/e1000/
-S: Supported
-
-INTEL PRO/10GbE SUPPORT
-P: Ayyappan Veeraiyan
-M: ayyappan.veeraiyan@xxxxxxxxx
-P: Auke Kok
-M: auke-jan.h.kok@xxxxxxxxx
-P: Jesse Brandeburg
-M: jesse.brandeburg@xxxxxxxxx
-P: John Ronciak
-M: john.ronciak@xxxxxxxxx
-L: e1000-devel@xxxxxxxxxxxxxxxxxxxxx
-W: http://sourceforge.net/projects/e1000/
+W: http://e1000.sourceforge.net/
S: Supported
INTEL PRO/WIRELESS 2100 NETWORK CONNECTION SUPPORT
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index a0f0e60..a64bb41 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2519,7 +2519,7 @@ config CHELSIO_T3
config EHEA
tristate "eHEA Ethernet support"
- depends on IBMEBUS && INET
+ depends on IBMEBUS && INET && SPARSEMEM
select INET_LRO
---help---
This driver supports the IBM pSeries eHEA ethernet adapter.
diff --git a/drivers/net/atarilance.c b/drivers/net/atarilance.c
index b74dbee..13c293b 100644
--- a/drivers/net/atarilance.c
+++ b/drivers/net/atarilance.c
@@ -336,8 +336,6 @@ struct lance_addr {
/***************************** Prototypes *****************************/
-static int addr_accessible( volatile void *regp, int wordflag, int
- writeflag );
static unsigned long lance_probe1( struct net_device *dev, struct lance_addr
*init_rec );
static int lance_open( struct net_device *dev );
@@ -406,7 +404,8 @@ struct net_device * __init atarilance_probe(int unit)
/* Derived from hwreg_present() in atari/config.c: */
-static int __init addr_accessible( volatile void *regp, int wordflag, int writeflag )
+static noinline int __init addr_accessible(volatile void *regp, int wordflag,
+ int writeflag)
{
int ret;
long flags;
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 36ba6dc..cdf3090 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -2782,16 +2782,13 @@ static void __devexit e100_remove(struct pci_dev *pdev)
}
}
-#ifdef CONFIG_PM
static int e100_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct nic *nic = netdev_priv(netdev);
if (netif_running(netdev))
- napi_disable(&nic->napi);
- del_timer_sync(&nic->watchdog);
- netif_carrier_off(nic->netdev);
+ e100_down(nic);
netif_device_detach(netdev);
pci_save_state(pdev);
@@ -2804,14 +2801,13 @@ static int e100_suspend(struct pci_dev *pdev, pm_message_t state)
pci_enable_wake(pdev, PCI_D3cold, 0);
}
- free_irq(pdev->irq, netdev);
-
pci_disable_device(pdev);
pci_set_power_state(pdev, PCI_D3hot);
return 0;
}
+#ifdef CONFIG_PM
static int e100_resume(struct pci_dev *pdev)
{
struct net_device *netdev = pci_get_drvdata(pdev);
@@ -2832,26 +2828,7 @@ static int e100_resume(struct pci_dev *pdev)
static void e100_shutdown(struct pci_dev *pdev)
{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct nic *nic = netdev_priv(netdev);
-
- if (netif_running(netdev))
- napi_disable(&nic->napi);
- del_timer_sync(&nic->watchdog);
- netif_carrier_off(nic->netdev);
-
- if ((nic->flags & wol_magic) | e100_asf(nic)) {
- pci_enable_wake(pdev, PCI_D3hot, 1);
- pci_enable_wake(pdev, PCI_D3cold, 1);
- } else {
- pci_enable_wake(pdev, PCI_D3hot, 0);
- pci_enable_wake(pdev, PCI_D3cold, 0);
- }
-
- free_irq(pdev->irq, netdev);
-
- pci_disable_device(pdev);
- pci_set_power_state(pdev, PCI_D3hot);
+ e100_suspend(pdev, PMSG_SUSPEND);
}
/* ------------------ PCI Error Recovery infrastructure -------------- */
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 23d0a4a..c2095ce 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -2133,7 +2133,7 @@ static void ixgbe_watchdog(unsigned long data)
(link_speed == IXGBE_LINK_SPEED_10GB_FULL ?
"10 Gbps" :
(link_speed == IXGBE_LINK_SPEED_1GB_FULL ?
- "1 Gpbs" : "unknown speed")),
+ "1 Gbps" : "unknown speed")),
((FLOW_RX && FLOW_TX) ? "RX/TX" :
(FLOW_RX ? "RX" :
(FLOW_TX ? "TX" : "None"))));
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index b528ce7..771139e 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -2104,6 +2104,7 @@ MODULE_LICENSE("GPL");
MODULE_AUTHOR( "Rabeeh Khoury, Assaf Hoffman, Matthew Dharm, Manish Lachwani"
" and Dale Farnsworth");
MODULE_DESCRIPTION("Ethernet driver for Marvell MV643XX");
+MODULE_ALIAS("platform:mv643xx_eth");
/*
* The second part is the low level driver of the gigE ethernet ports.
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index e8a63e4..ce95c5d 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -1268,7 +1268,7 @@ static irqreturn_t ax_interrupt(int irq, void *dev_id)
}
}
- if (interrupts && ei_debug)
+ if (interrupts && ei_debug > 3)
{
handled = 1;
if (nr_serviced >= MAX_SERVICE)
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index f4ca059..3ac8529 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -67,6 +67,7 @@ config REALTEK_PHY
config FIXED_PHY
bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ depends on PHYLIB=y
---help---
Adds the platform "fixed" MDIO Bus to cover the boards that use
PHYs that are not connected to the real MDIO bus.
diff --git a/drivers/net/phy/davicom.c b/drivers/net/phy/davicom.c
index 7ed632d..d926168 100644
--- a/drivers/net/phy/davicom.c
+++ b/drivers/net/phy/davicom.c
@@ -37,6 +37,7 @@
#define MII_DM9161_SCR 0x10
#define MII_DM9161_SCR_INIT 0x0610
+#define MII_DM9161_SCR_RMII 0x0100
/* DM9161 Interrupt Register */
#define MII_DM9161_INTR 0x15
@@ -103,7 +104,7 @@ static int dm9161_config_aneg(struct phy_device *phydev)
static int dm9161_config_init(struct phy_device *phydev)
{
- int err;
+ int err, temp;
/* Isolate the PHY */
err = phy_write(phydev, MII_BMCR, BMCR_ISOLATE);
@@ -111,9 +112,19 @@ static int dm9161_config_init(struct phy_device *phydev)
if (err < 0)
return err;
- /* Do not bypass the scrambler/descrambler */
- err = phy_write(phydev, MII_DM9161_SCR, MII_DM9161_SCR_INIT);
+ switch (phydev->interface) {
+ case PHY_INTERFACE_MODE_MII:
+ temp = MII_DM9161_SCR_INIT;
+ break;
+ case PHY_INTERFACE_MODE_RMII:
+ temp = MII_DM9161_SCR_INIT | MII_DM9161_SCR_RMII;
+ break;
+ default:
+ return -EINVAL;
+ }
+ /* Do not bypass the scrambler/descrambler */
+ err = phy_write(phydev, MII_DM9161_SCR, temp);
if (err < 0)
return err;
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 6179a0a..c72787a 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -1088,7 +1088,7 @@ static int s2io_print_pci_mode(struct s2io_nic *nic)
* '-1' on failure
*/
-int init_tti(struct s2io_nic *nic, int link)
+static int init_tti(struct s2io_nic *nic, int link)
{
struct XENA_dev_config __iomem *bar0 = nic->bar0;
register u64 val64 = 0;
diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c
index 77d9dd7..567c627 100644
--- a/drivers/net/tulip/de2104x.c
+++ b/drivers/net/tulip/de2104x.c
@@ -910,7 +910,8 @@ static void de_set_media (struct de_private *de)
unsigned media = de->media_type;
u32 macmode = dr32(MacMode);
- BUG_ON(de_is_running(de));
+ if (de_is_running(de))
+ printk(KERN_WARNING "%s: chip is running while changing media!\n", de->dev->name);
if (de->de21040)
dw32(CSR11, FULL_DUPLEX_MAGIC);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/