[PATCH 17/52] create smpcommon.c

From: Glauber Costa
Date: Mon Mar 03 2008 - 12:20:57 EST


This patch creates smpcommon.c with functions that are
equal between architectures. The i386-only init_gdt
is ifdef'd.

Note that smpcommon.o figures twice in the Makefile:
this is because sub-architectures like voyager that does
not use the normal smp_$(BITS) files also have to access them

Signed-off-by: Glauber Costa <gcosta@xxxxxxxxxx>
---
arch/x86/kernel/Makefile | 4 +-
arch/x86/kernel/smp_64.c | 56 ---------------------------
arch/x86/kernel/smpcommon.c | 83 ++++++++++++++++++++++++++++++++++++++++
arch/x86/kernel/smpcommon_32.c | 81 ---------------------------------------
4 files changed, 85 insertions(+), 139 deletions(-)
create mode 100644 arch/x86/kernel/smpcommon.c

diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 4c68bfc..018d04d 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -47,8 +47,8 @@ obj-$(CONFIG_PCI) += early-quirks.o
apm-y := apm_32.o
obj-$(CONFIG_APM) += apm.o
obj-$(CONFIG_X86_SMP) += smp_$(BITS).o smpboot_$(BITS).o smpboot.o tsc_sync.o
-obj-$(CONFIG_X86_32_SMP) += smpcommon_32.o
-obj-$(CONFIG_X86_64_SMP) += smp_64.o smpboot_64.o tsc_sync.o
+obj-$(CONFIG_X86_32_SMP) += smpcommon.o
+obj-$(CONFIG_X86_64_SMP) += smp_64.o smpboot_64.o tsc_sync.o smpcommon.o
obj-$(CONFIG_X86_TRAMPOLINE) += trampoline_$(BITS).o
obj-$(CONFIG_X86_MPPARSE) += mpparse_$(BITS).o
obj-$(CONFIG_X86_LOCAL_APIC) += apic_$(BITS).o nmi_$(BITS).o
diff --git a/arch/x86/kernel/smp_64.c b/arch/x86/kernel/smp_64.c
index b040224..1d8b863 100644
--- a/arch/x86/kernel/smp_64.c
+++ b/arch/x86/kernel/smp_64.c
@@ -401,62 +401,6 @@ int native_smp_call_function_mask(cpumask_t mask,
return ret;
}

-/*
- * smp_call_function_single - Run a function on a specific CPU
- * @func: The function to run. This must be fast and non-blocking.
- * @info: An arbitrary pointer to pass to the function.
- * @nonatomic: Currently unused.
- * @wait: If true, wait until function has completed on other CPUs.
- *
- * Retrurns 0 on success, else a negative status code.
- *
- * Does not return until the remote CPU is nearly ready to execute <func>
- * or is or has executed.
- */
-
-int smp_call_function_single (int cpu, void (*func) (void *info), void *info,
- int nonatomic, int wait)
-{
- /* prevent preemption and reschedule on another processor */
- int ret, me = get_cpu();
-
- if (cpu == me) {
- local_irq_disable();
- func(info);
- local_irq_enable();
- put_cpu();
- return 0;
- }
-
- ret = smp_call_function_mask(cpumask_of_cpu(cpu), func, info, wait);
-
- put_cpu();
- return ret;
-}
-EXPORT_SYMBOL(smp_call_function_single);
-
-/*
- * smp_call_function - run a function on all other CPUs.
- * @func: The function to run. This must be fast and non-blocking.
- * @info: An arbitrary pointer to pass to the function.
- * @nonatomic: currently unused.
- * @wait: If true, wait (atomically) until function has completed on other
- * CPUs.
- *
- * Returns 0 on success, else a negative status code. Does not return until
- * remote CPUs are nearly ready to execute func or are or have executed.
- *
- * You must not call this function with disabled interrupts or from a
- * hardware interrupt handler or from a bottom half handler.
- * Actually there are a few legal cases, like panic.
- */
-int smp_call_function (void (*func) (void *info), void *info, int nonatomic,
- int wait)
-{
- return smp_call_function_mask(cpu_online_map, func, info, wait);
-}
-EXPORT_SYMBOL(smp_call_function);
-
static void stop_this_cpu(void *dummy)
{
local_irq_disable();
diff --git a/arch/x86/kernel/smpcommon.c b/arch/x86/kernel/smpcommon.c
new file mode 100644
index 0000000..3449064
--- /dev/null
+++ b/arch/x86/kernel/smpcommon.c
@@ -0,0 +1,83 @@
+/*
+ * SMP stuff which is common to all sub-architectures.
+ */
+#include <linux/module.h>
+#include <asm/smp.h>
+
+#ifdef CONFIG_X86_32
+DEFINE_PER_CPU(unsigned long, this_cpu_off);
+EXPORT_PER_CPU_SYMBOL(this_cpu_off);
+
+/* Initialize the CPU's GDT. This is either the boot CPU doing itself
+ (still using the master per-cpu area), or a CPU doing it for a
+ secondary which will soon come up. */
+__cpuinit void init_gdt(int cpu)
+{
+ struct desc_struct *gdt = get_cpu_gdt_table(cpu);
+
+ pack_descriptor(&gdt[GDT_ENTRY_PERCPU],
+ __per_cpu_offset[cpu], 0xFFFFF,
+ 0x2 | DESCTYPE_S, 0x8);
+
+ gdt[GDT_ENTRY_PERCPU].s = 1;
+
+ per_cpu(this_cpu_off, cpu) = __per_cpu_offset[cpu];
+ per_cpu(cpu_number, cpu) = cpu;
+}
+#endif
+
+/**
+ * smp_call_function(): Run a function on all other CPUs.
+ * @func: The function to run. This must be fast and non-blocking.
+ * @info: An arbitrary pointer to pass to the function.
+ * @nonatomic: Unused.
+ * @wait: If true, wait (atomically) until function has completed on other CPUs.
+ *
+ * Returns 0 on success, else a negative status code.
+ *
+ * If @wait is true, then returns once @func has returned; otherwise
+ * it returns just before the target cpu calls @func.
+ *
+ * You must not call this function with disabled interrupts or from a
+ * hardware interrupt handler or from a bottom half handler.
+ */
+int smp_call_function(void (*func) (void *info), void *info, int nonatomic,
+ int wait)
+{
+ return smp_call_function_mask(cpu_online_map, func, info, wait);
+}
+EXPORT_SYMBOL(smp_call_function);
+
+/**
+ * smp_call_function_single - Run a function on a specific CPU
+ * @cpu: The target CPU. Cannot be the calling CPU.
+ * @func: The function to run. This must be fast and non-blocking.
+ * @info: An arbitrary pointer to pass to the function.
+ * @nonatomic: Unused.
+ * @wait: If true, wait until function has completed on other CPUs.
+ *
+ * Returns 0 on success, else a negative status code.
+ *
+ * If @wait is true, then returns once @func has returned; otherwise
+ * it returns just before the target cpu calls @func.
+ */
+int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
+ int nonatomic, int wait)
+{
+ /* prevent preemption and reschedule on another processor */
+ int ret;
+ int me = get_cpu();
+ if (cpu == me) {
+ local_irq_disable();
+ func(info);
+ local_irq_enable();
+ put_cpu();
+ return 0;
+ }
+
+ ret = smp_call_function_mask(cpumask_of_cpu(cpu), func, info, wait);
+
+ put_cpu();
+ return ret;
+}
+EXPORT_SYMBOL(smp_call_function_single);
diff --git a/arch/x86/kernel/smpcommon_32.c b/arch/x86/kernel/smpcommon_32.c
index 8bc38af..8b13789 100644
--- a/arch/x86/kernel/smpcommon_32.c
+++ b/arch/x86/kernel/smpcommon_32.c
@@ -1,82 +1 @@
-/*
- * SMP stuff which is common to all sub-architectures.
- */
-#include <linux/module.h>
-#include <asm/smp.h>

-DEFINE_PER_CPU(unsigned long, this_cpu_off);
-EXPORT_PER_CPU_SYMBOL(this_cpu_off);
-
-/* Initialize the CPU's GDT. This is either the boot CPU doing itself
- (still using the master per-cpu area), or a CPU doing it for a
- secondary which will soon come up. */
-__cpuinit void init_gdt(int cpu)
-{
- struct desc_struct *gdt = get_cpu_gdt_table(cpu);
-
- pack_descriptor(&gdt[GDT_ENTRY_PERCPU],
- __per_cpu_offset[cpu], 0xFFFFF,
- 0x2 | DESCTYPE_S, 0x8);
-
- gdt[GDT_ENTRY_PERCPU].s = 1;
-
- per_cpu(this_cpu_off, cpu) = __per_cpu_offset[cpu];
- per_cpu(cpu_number, cpu) = cpu;
-}
-
-
-/**
- * smp_call_function(): Run a function on all other CPUs.
- * @func: The function to run. This must be fast and non-blocking.
- * @info: An arbitrary pointer to pass to the function.
- * @nonatomic: Unused.
- * @wait: If true, wait (atomically) until function has completed on other CPUs.
- *
- * Returns 0 on success, else a negative status code.
- *
- * If @wait is true, then returns once @func has returned; otherwise
- * it returns just before the target cpu calls @func.
- *
- * You must not call this function with disabled interrupts or from a
- * hardware interrupt handler or from a bottom half handler.
- */
-int smp_call_function(void (*func) (void *info), void *info, int nonatomic,
- int wait)
-{
- return smp_call_function_mask(cpu_online_map, func, info, wait);
-}
-EXPORT_SYMBOL(smp_call_function);
-
-/**
- * smp_call_function_single - Run a function on a specific CPU
- * @cpu: The target CPU. Cannot be the calling CPU.
- * @func: The function to run. This must be fast and non-blocking.
- * @info: An arbitrary pointer to pass to the function.
- * @nonatomic: Unused.
- * @wait: If true, wait until function has completed on other CPUs.
- *
- * Returns 0 on success, else a negative status code.
- *
- * If @wait is true, then returns once @func has returned; otherwise
- * it returns just before the target cpu calls @func.
- */
-int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
- int nonatomic, int wait)
-{
- /* prevent preemption and reschedule on another processor */
- int ret;
- int me = get_cpu();
- if (cpu == me) {
- local_irq_disable();
- func(info);
- local_irq_enable();
- put_cpu();
- return 0;
- }
-
- ret = smp_call_function_mask(cpumask_of_cpu(cpu), func, info, wait);
-
- put_cpu();
- return ret;
-}
-EXPORT_SYMBOL(smp_call_function_single);
--
1.5.0.6

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/