Re: New 2.6.24.2 SG_IO SCSI problems

From: Mark Hounschell
Date: Sat Feb 23 2008 - 06:21:23 EST


Mike Christie wrote:
> Mark Hounschell wrote:
>> Mark Hounschell wrote:
>>> Mike Christie wrote:
>>>> Mike Christie wrote:
>>>>> Mark Hounschell wrote:
>>>>>> I seem to have run into some sort of regression in the SG_IO
>>>>>> interface of 2.6.24.2. I have an application that up until 2.6.24
>>>>>> worked fine. The 2.6.23.16 kernel works fine.
>>>>>>
>>>>>> During reads I get these kernel messages. Writes and other functions
>>>>>> _seem_ OK. Actually basic
>>>>>> reads are working. Its with large BC reads using an io_vec list that
>>>>>> the problem shows up.
>>>>>>
>>>>> Are you doing SG_IO to the sg device (/dev/sg*) or to the block device
>>>>> (/dev/sdX)?
>>>> If you are doing SG_IO to the sg device, then I know of one regression
>>>> (well not regression exactly, but I fixed a bug but the patch got
>>>> partially overwritten by another patch and that caused a new bug). Both
>>>> bugs are fixed in 2.6.25-rc2. Could you try that out if you are doing
>>>> SG_IO to the sg device.
>>>>
>>> Yes, I'm using /dev/sg*. And yes again I'll checkout 2.6.25-rc2 ASIC.
>>>
>>> Thanks
>>> Mark
>>> -
>>
>> 2.6.25-rc2 does fix the problem I'm having. I don't suppose there is a
>> patch
>> lying around for 2.6.24.2??
>>
>
> I attached a backport of the patch from Tony (added as cc) that is in
> 2.6.25-rc2. Could you try it out against 2.6.24.2 just to make sure it
> was this patch, then we can send it to stable.
>

Sorry it took so long. This does fix my problem. I hope it's not to late
for 2.6.24.3

Regards
Mark
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/