Re: 2.6.25-rc2-mm1: build failure (x86)

[Marcin Slusarz]

On Sun, Feb 17, 2008 at 02:37:09AM +0100, Rafael J. Wysocki wrote:
> On Saturday, 16 of February 2008, Marcin Slusarz wrote:
> > On Sat, Feb 16, 2008 at 03:09:49AM -0800, Andrew Morton wrote:
> > > On Sat, 16 Feb 2008 11:59:07 +0100 Marcin Slusarz <marcin.slusarz@xxxxxxxxx> wrote:
> > > 
> > > > arch/x86/kernel/built-in.o: In function `amd_smp_thermal_interrupt':
> > > > (.text+0xe03b): undefined reference to `mce_log_therm_throt_event'
> > > > arch/x86/kernel/built-in.o: In function `acpi_save_state_mem':
> > > > (.text+0x12239): undefined reference to `setup_trampoline'
> > > > 
> > > > #
> > > > # Automatically generated make config: don't edit
> > > > # Linux kernel version: 2.6.25-rc2-mm1
> > > > # Sat Feb 16 11:32:49 2008
> > > 
> > > ho hum, thanks.  I think I'll drop x86-amd-thermal-interrupt-support.patch.
> > >  I don't think it's the final version anwyay.
> > > 
> > Ok, I had to revert x86-remove-pt_regs-arg-from-smp_thermal_interrupt before x86-amd-thermal-interrupt-support.
> > 
> > Second error vanished when I reverted "suspend: wakeup code in C".
> 
> The appended patch should fix the second error.
Yes, it did.

> Thanks,
> Rafael
> 
> ---
> On x86-64 the CPU trampoline code is now used while waking up from ACPI
> suspend to RAM.  For this reason, make it depend on
> (64BIT && ACPI_SLEEP) as well as on SMP, move the relevant declarations
> to a separate header and move the definition of setup_trampoline() from
> smpboot_64.c .
> 
> Signed-off-by: Rafael J. Wysocki <rjw@xxxxxxx>
> ---
>  arch/x86/Kconfig             |    2 +-
>  arch/x86/kernel/acpi/sleep.c |    1 -
>  arch/x86/kernel/acpi/sleep.h |    3 ++-
>  arch/x86/kernel/e820_64.c    |    5 +++--
>  arch/x86/kernel/setup_64.c   |   16 ++++++++++++++++
>  arch/x86/kernel/smpboot_64.c |   23 ++---------------------
>  include/asm-x86/smp_64.h     |    2 --
>  include/asm-x86/trampoline.h |   18 ++++++++++++++++++
>  8 files changed, 42 insertions(+), 28 deletions(-)
> 
> Index: linux-2.6.25-rc2-mm1/arch/x86/Kconfig
> ===================================================================
> --- linux-2.6.25-rc2-mm1.orig/arch/x86/Kconfig
> +++ linux-2.6.25-rc2-mm1/arch/x86/Kconfig
> @@ -180,7 +180,7 @@ config X86_BIOS_REBOOT
>  
>  config X86_TRAMPOLINE
>  	bool
> -	depends on X86_SMP || (X86_VOYAGER && SMP)
> +	depends on X86_SMP || (X86_VOYAGER && SMP) || (64BIT && ACPI_SLEEP)
>  	default y
>  
>  config KTIME_SCALAR
> Index: linux-2.6.25-rc2-mm1/arch/x86/kernel/e820_64.c
> ===================================================================
> --- linux-2.6.25-rc2-mm1.orig/arch/x86/kernel/e820_64.c
> +++ linux-2.6.25-rc2-mm1/arch/x86/kernel/e820_64.c
> @@ -27,6 +27,7 @@
>  #include <asm/setup.h>
>  #include <asm/sections.h>
>  #include <asm/kdebug.h>
> +#include <asm/trampoline.h>
>  
>  struct e820map e820;
>  
> @@ -58,8 +59,8 @@ struct early_res {
>  };
>  static struct early_res early_res[MAX_EARLY_RES] __initdata = {
>  	{ 0, PAGE_SIZE, "BIOS data page" },			/* BIOS data page */
> -#ifdef CONFIG_SMP
> -	{ SMP_TRAMPOLINE_BASE, SMP_TRAMPOLINE_BASE + 2*PAGE_SIZE, "SMP_TRAMPOLINE" },
> +#ifdef CONFIG_X86_TRAMPOLINE
> +	{ TRAMPOLINE_BASE, TRAMPOLINE_BASE + 2 * PAGE_SIZE, "TRAMPOLINE" },
>  #endif
>  	{}
>  };
> Index: linux-2.6.25-rc2-mm1/arch/x86/kernel/smpboot_64.c
> ===================================================================
> --- linux-2.6.25-rc2-mm1.orig/arch/x86/kernel/smpboot_64.c
> +++ linux-2.6.25-rc2-mm1/arch/x86/kernel/smpboot_64.c
> @@ -59,6 +59,7 @@
>  #include <asm/irq.h>
>  #include <asm/hw_irq.h>
>  #include <asm/numa.h>
> +#include <asm/trampoline.h>
>  
>  /* Number of siblings per CPU package */
>  int smp_num_siblings = 1;
> @@ -96,13 +97,6 @@ EXPORT_PER_CPU_SYMBOL(cpu_sibling_map);
>  DEFINE_PER_CPU(cpumask_t, cpu_core_map);
>  EXPORT_PER_CPU_SYMBOL(cpu_core_map);
>  
> -/*
> - * Trampoline 80x86 program as an array.
> - */
> -
> -extern const unsigned char trampoline_data[];
> -extern const unsigned char trampoline_end[];
> -
>  /* State of each CPU */
>  DEFINE_PER_CPU(int, cpu_state) = { 0 };
>  
> @@ -127,19 +121,6 @@ struct task_struct *idle_thread_array[NR
>  
>  
>  /*
> - * Currently trivial. Write the real->protected mode
> - * bootstrap into the page concerned. The caller
> - * has made sure it's suitably aligned.
> - */
> -
> -unsigned long __cpuinit setup_trampoline(void)
> -{
> -	void *tramp = __va(SMP_TRAMPOLINE_BASE); 
> -	memcpy(tramp, trampoline_data, trampoline_end - trampoline_data);
> -	return virt_to_phys(tramp);
> -}
> -
> -/*
>   * The bootstrap kernel entry code has set these up. Save them for
>   * a given CPU
>   */
> @@ -690,7 +671,7 @@ do_rest:
>  			Dprintk("CPU has booted.\n");
>  		} else {
>  			boot_error = 1;
> -			if (*((volatile unsigned char *)phys_to_virt(SMP_TRAMPOLINE_BASE))
> +			if (*((unsigned char *)phys_to_virt(TRAMPOLINE_BASE))
>  					== 0xA5)
>  				/* trampoline started but...? */
>  				printk("Stuck ??\n");
> Index: linux-2.6.25-rc2-mm1/include/asm-x86/smp_64.h
> ===================================================================
> --- linux-2.6.25-rc2-mm1.orig/include/asm-x86/smp_64.h
> +++ linux-2.6.25-rc2-mm1/include/asm-x86/smp_64.h
> @@ -47,8 +47,6 @@ static inline int cpu_present_to_apicid(
>  
>  #ifdef CONFIG_SMP
>  
> -#define SMP_TRAMPOLINE_BASE 0x6000
> -
>  extern int __cpu_disable(void);
>  extern void __cpu_die(unsigned int cpu);
>  extern void prefill_possible_map(void);
> Index: linux-2.6.25-rc2-mm1/arch/x86/kernel/acpi/sleep.h
> ===================================================================
> --- linux-2.6.25-rc2-mm1.orig/arch/x86/kernel/acpi/sleep.h
> +++ linux-2.6.25-rc2-mm1/arch/x86/kernel/acpi/sleep.h
> @@ -2,6 +2,8 @@
>   *	Variables and functions used by the code in sleep.c
>   */
>  
> +#include <asm/trampoline.h>
> +
>  extern char wakeup_code_start, wakeup_code_end;
>  
>  extern unsigned long saved_video_mode;
> @@ -13,5 +15,4 @@ extern int wakeup_pmode_return;
>  extern char swsusp_pg_dir[PAGE_SIZE];
>  
>  extern unsigned long acpi_copy_wakeup_routine(unsigned long);
> -extern unsigned long setup_trampoline(void);
>  extern void wakeup_long64(void);
> Index: linux-2.6.25-rc2-mm1/arch/x86/kernel/setup_64.c
> ===================================================================
> --- linux-2.6.25-rc2-mm1.orig/arch/x86/kernel/setup_64.c
> +++ linux-2.6.25-rc2-mm1/arch/x86/kernel/setup_64.c
> @@ -66,6 +66,7 @@
>  #include <asm/mce.h>
>  #include <asm/ds.h>
>  #include <asm/topology.h>
> +#include <asm/trampoline.h>
>  
>  #ifdef CONFIG_PARAVIRT
>  #include <asm/paravirt.h>
> @@ -1184,3 +1185,18 @@ const struct seq_operations cpuinfo_op =
>  	.stop =	c_stop,
>  	.show =	show_cpuinfo,
>  };
> +
> +#ifdef CONFIG_X86_TRAMPOLINE
> +/*
> + * Currently trivial. Write the real->protected mode
> + * bootstrap into the page concerned. The caller
> + * has made sure it's suitably aligned.
> + */
> +
> +unsigned long setup_trampoline(void)
> +{
> +	void *tramp = __va(TRAMPOLINE_BASE);
> +	memcpy(tramp, trampoline_data, trampoline_end - trampoline_data);
> +	return virt_to_phys(tramp);
> +}
> +#endif /* CONFIG_X86_TRAMPOLINE */
> Index: linux-2.6.25-rc2-mm1/arch/x86/kernel/acpi/sleep.c
> ===================================================================
> --- linux-2.6.25-rc2-mm1.orig/arch/x86/kernel/acpi/sleep.c
> +++ linux-2.6.25-rc2-mm1/arch/x86/kernel/acpi/sleep.c
> @@ -10,7 +10,6 @@
>  #include <linux/dmi.h>
>  #include <linux/cpumask.h>
>  
> -#include <asm/smp.h>
>  #include "realmode/wakeup.h"
>  #include "sleep.h"
>  
> Index: linux-2.6.25-rc2-mm1/include/asm-x86/trampoline.h
> ===================================================================
> --- /dev/null
> +++ linux-2.6.25-rc2-mm1/include/asm-x86/trampoline.h
> @@ -0,0 +1,18 @@
> +#ifndef __TRAMPOLINE_HEADER
> +#define __TRAMPOLINE_HEADER
> +
> +#ifndef __ASSEMBLY__
> +
> +#define TRAMPOLINE_BASE 0x6000
> +
> +/*
> + * Trampoline 80x86 program as an array.
> + */
> +extern const unsigned char trampoline_data[];
> +extern const unsigned char trampoline_end[];
> +
> +extern unsigned long setup_trampoline(void);
> +
> +#endif /* __ASSEMBLY__ */
> +
> +#endif /* __TRAMPOLINE_HEADER */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/