[BUILD FAILURE] 2.6.24-git7 section type conflict at various driverson powerpc

From: Kamalesh Babulal
Date: Wed Jan 30 2008 - 11:35:30 EST


Hi,

Following are the different build failure with 2.6.24-git7 kernel on the powerpc

drivers/net/typhoon.c:181: error: typhoon_card_info causes a section type conflict
make[2]: *** [drivers/net/typhoon.o] Error 1

drivers/net/natsemi.c:259: error: natsemi_pci_info causes a section type conflict
make[2]: *** [drivers/net/natsemi.o] Error 1

drivers/net/bnx2.c:95: error: board_info causes a section type conflict
make[2]: *** [drivers/net/bnx2.o] Error 1

drivers/net/via-velocity.c:454: error: velocity_id_table causes a section type conflict
make[2]: *** [drivers/net/via-velocity.o] Error 1


Following are warning with section mismatch CONFIG_DEBUG_SECTION_MISMATCH enabled,

WARNING: kernel/built-in.o(.text+0x423f4): Section mismatch in reference from the function .enable_nonboot_cpus() to the function .cpuinit.text:._cpu_up()
The function .enable_nonboot_cpus() references
the function __cpuinit ._cpu_up().
This is often because .enable_nonboot_cpus lacks a __cpuinit
annotation or the annotation of ._cpu_up is wrong.

WARNING: drivers/net/ibm_newemac/ibm_newemac.o(.devinit.text+0x1bb4): Section mismatch in reference from the function .emac_probe() to the function .devexit.text:.tah_detach()
The function __devinit .emac_probe() references
a function __devexit .tah_detach().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __devexit annotation of
.tah_detach() so it may be used outside an exit section.

WARNING: drivers/net/ibm_newemac/ibm_newemac.o(.devinit.text+0x1bd0): Section mismatch in reference from the function .emac_probe() to the function .devexit.text:.rgmii_detach()
The function __devinit .emac_probe() references
a function __devexit .rgmii_detach().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __devexit annotation of
.rgmii_detach() so it may be used outside an exit section.

WARNING: drivers/net/ibm_newemac/ibm_newemac.o(.devinit.text+0x1bec): Section mismatch in reference from the function .emac_probe() to the function .devexit.text:.zmii_detach()
The function __devinit .emac_probe() references
a function __devexit .zmii_detach().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __devexit annotation of
.zmii_detach() so it may be used outside an exit section.

WARNING: drivers/net/ibm_newemac/ibm_newemac.o(.devinit.text+0x1bfc): Section mismatch in reference from the function .emac_probe() to the function .devexit.text:.mal_unregister_commac()
The function __devinit .emac_probe() references
a function __devexit .mal_unregister_commac().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __devexit annotation of
.mal_unregister_commac() so it may be used outside an exit section.

LD drivers/net/ibm_newemac/built-in.o
WARNING: drivers/net/ibm_newemac/built-in.o(.devinit.text+0x1bb4): Section mismatch in reference from the function .emac_probe() to the function .devexit.text:.tah_detach()
The function __devinit .emac_probe() references
a function __devexit .tah_detach().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __devexit annotation of
.tah_detach() so it may be used outside an exit section.

WARNING: drivers/net/ibm_newemac/built-in.o(.devinit.text+0x1bd0): Section mismatch in reference from the function .emac_probe() to the function .devexit.text:.rgmii_detach()
The function __devinit .emac_probe() references
a function __devexit .rgmii_detach().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __devexit annotation of
.rgmii_detach() so it may be used outside an exit section.

WARNING: drivers/net/ibm_newemac/built-in.o(.devinit.text+0x1bec): Section mismatch in reference from the function .emac_probe() to the function .devexit.text:.zmii_detach()
The function __devinit .emac_probe() references
a function __devexit .zmii_detach().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __devexit annotation of
.zmii_detach() so it may be used outside an exit section.

WARNING: drivers/net/ibm_newemac/built-in.o(.devinit.text+0x1bfc): Section mismatch in reference from the function .emac_probe() to the function .devexit.text:.mal_unregister_commac()
The function __devinit .emac_probe() references
a function __devexit .mal_unregister_commac().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __devexit annotation of
.mal_unregister_commac() so it may be used outside an exit section.

WARNING: drivers/net/mlx4/mlx4_core.o(.text+0x6cf8): Section mismatch in reference from the function .mlx4_init_icm() to the function .devinit.text:.mlx4_init_cmpt_table()
The function .mlx4_init_icm() references
the function __devinit .mlx4_init_cmpt_table().
This is often because .mlx4_init_icm lacks a __devinit
annotation or the annotation of .mlx4_init_cmpt_table is wrong.

WARNING: drivers/net/mlx4/mlx4_core.o(.text+0x728c): Section mismatch in reference from the function .mlx4_init_hca() to the function .devinit.text:.mlx4_load_fw()
The function .mlx4_init_hca() references
the function __devinit .mlx4_load_fw().
This is often because .mlx4_init_hca lacks a __devinit
annotation or the annotation of .mlx4_load_fw is wrong.

WARNING: drivers/net/mlx4/mlx4_core.o(.text+0x7c98): Section mismatch in reference from the function .__mlx4_init_one() to the function .devinit.text:.mlx4_enable_msi_x()
The function .__mlx4_init_one() references
the function __devinit .mlx4_enable_msi_x().
This is often because .__mlx4_init_one lacks a __devinit
annotation or the annotation of .mlx4_enable_msi_x is wrong.

WARNING: drivers/net/mlx4/mlx4_core.o(.text+0x97ac): Section mismatch in reference from the function .mlx4_init_mr_table() to the function .devinit.text:.mlx4_buddy_init()
The function .mlx4_init_mr_table() references
the function __devinit .mlx4_buddy_init().
This is often because .mlx4_init_mr_table lacks a __devinit
annotation or the annotation of .mlx4_buddy_init is wrong.

LD drivers/net/mlx4/built-in.o
WARNING: drivers/net/mlx4/built-in.o(.text+0x6cf8): Section mismatch in reference from the function .mlx4_init_icm() to the function .devinit.text:.mlx4_init_cmpt_table()
The function .mlx4_init_icm() references
the function __devinit .mlx4_init_cmpt_table().
This is often because .mlx4_init_icm lacks a __devinit
annotation or the annotation of .mlx4_init_cmpt_table is wrong.

WARNING: drivers/net/mlx4/built-in.o(.text+0x728c): Section mismatch in reference from the function .mlx4_init_hca() to the function .devinit.text:.mlx4_load_fw()
The function .mlx4_init_hca() references
the function __devinit .mlx4_load_fw().
This is often because .mlx4_init_hca lacks a __devinit
annotation or the annotation of .mlx4_load_fw is wrong.

WARNING: drivers/net/mlx4/built-in.o(.text+0x7c98): Section mismatch in reference from the function .__mlx4_init_one() to the function .devinit.text:.mlx4_enable_msi_x()
The function .__mlx4_init_one() references
the function __devinit .mlx4_enable_msi_x().
This is often because .__mlx4_init_one lacks a __devinit
annotation or the annotation of .mlx4_enable_msi_x is wrong.

WARNING: drivers/net/mlx4/built-in.o(.text+0x97ac): Section mismatch in reference from the function .mlx4_init_mr_table() to the function .devinit.text:.mlx4_buddy_init()
The function .mlx4_init_mr_table() references
the function __devinit .mlx4_buddy_init().
This is often because .mlx4_init_mr_table lacks a __devinit
annotation or the annotation of .mlx4_buddy_init is wrong.

WARNING: drivers/net/tokenring/built-in.o(.text+0x4d64): Section mismatch in reference from the function .olympic_open() to the function .devinit.text:.olympic_init()
The function .olympic_open() references
the function __devinit .olympic_init().
This is often because .olympic_open lacks a __devinit
annotation or the annotation of .olympic_init is wrong.


--
Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/