Re: JMicron PATA 2.6.24-rc7 can't find drives

[Lennart Sorensen]

On Thu, Jan 24, 2008 at 03:48:23PM +0100, Marcin Gil wrote:
> Yes, this is 80-wire cable; both are connected on the same cable. HDD is 
> master and DVD is slave. I'll later try disconnecting DVD and see what 
> happens. I didn't set cable-select due to how these drives are connected
> 
> +-----+-----+
> mobo  hdd   dvd
> 
> I think that cable select would take dvd as master and hdd as slave.
> This was not preferable when hdd was my primary drive. I can try 
> cable-select now since I boot off new SATA drive.

Does the BIOS see the HD on the jmicron when doing disk detection?

I remember once forgetting to connect power to a driver and spending a
while wondering why the drive wasn't showing up anywhere.

--
Len Sorensen
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/