Re: Peculiar out-of-sync boot log lines

From: Nick Warne
Date: Sun Dec 23 2007 - 12:56:35 EST


On Sun, 2 Dec 2007 19:30:34 +0100
Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx> wrote:

Hi Bart,

Top posting! grrrr.

This patch works fine on my system with this peculiar DVD drive, and
log reports are perfect.

Updated to Linus' git today - 2.6.24-rc6-g5b825ed2

/var/log/messages:

Dec 23 09:36:04 linuxamd kernel: ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:DMA
Dec 23 09:36:04 linuxamd kernel: ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:DMA
Dec 23 09:36:04 linuxamd kernel: hda: UDMA/66 mode selected
Dec 23 09:36:04 linuxamd kernel: hdb: UDMA/66 mode selected
Dec 23 09:36:04 linuxamd kernel: hdc: UDMA/66 mode selected
Dec 23 09:36:04 linuxamd kernel: hdd: UDMA/66 mode selected
Dec 23 09:36:04 linuxamd kernel: hda: max request size: 128KiB
Dec 23 09:36:04 linuxamd kernel: hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63
Dec 23 09:36:04 linuxamd kernel: hda: cache flushes supported
Dec 23 09:36:04 linuxamd kernel: hda: hda1 hda2 hda3 hda4
Dec 23 09:36:04 linuxamd kernel: hdb: max request size: 128KiB
Dec 23 09:36:04 linuxamd kernel: hdb: 30015216 sectors (15367 MB) w/2048KiB Cache, CHS=29777/16/63
Dec 23 09:36:04 linuxamd kernel: hdb: cache flushes not supported
Dec 23 09:36:04 linuxamd kernel: hdb: hdb1
Dec 23 09:36:04 linuxamd kernel: hdc: max request size: 128KiB
Dec 23 09:36:04 linuxamd kernel: hdc: 39876480 sectors (20416 MB) w/2048KiB Cache, CHS=39560/16/63
Dec 23 09:36:04 linuxamd kernel: hdc: cache flushes not supported
Dec 23 09:36:04 linuxamd kernel: hdc: hdc1
Dec 23 09:36:04 linuxamd kernel: hdd: ATAPI 48X DVD-ROM DVD-R-RAM
CD-R/RW drive, 2048kB Cache

and

/var/log/syslog

Dec 23 09:36:04 linuxamd kernel: hdb: Maxtor 51536H2, ATA DISK drive
Dec 23 09:36:04 linuxamd kernel: hda: Maxtor 6Y080L0, ATA DISK drive
Dec 23 09:36:04 linuxamd kernel: hdd: TSSTcorp CDDVDW SH-S202J, ATAPI CD/DVD-ROM drive
Dec 23 09:36:04 linuxamd kernel: hdc: Maxtor 52049H3, ATA DISK drive


> On Sunday 02 December 2007, Randy Dunlap wrote:
> > On Sat, 1 Dec 2007 22:59:35 +0100 Bartlomiej Zolnierkiewicz wrote:
> >
> > > Thanks for reporting/debugging it guys!
> > >
> > > > Something in there needs to insert a '\n' before the "skipping
> > > > word" message. Since it doesn't do that right now, the
> > > > KERN_DEBUG string appears as "<7>"
> > >
> > > This seems like a good occasion to fix ide_dma_verbose() for good
> > > so... :)
> > >
> > > [ patch is against current Linus tree so might not apply to
> > > 2.6.23.9 ]
> > >
> > > [PATCH] ide: DMA reporting and validity checking fixes
> > >
> > > * ide_xfer_verbose() fixups:
> > > - beautify returned mode names
> > > - fix PIO5 reporting
> > > - make it return 'const char *'
> > >
> > > * Change printk() level from KERN_DEBUG to KERN_INFO in
> > > ide_find_dma_mode().
> > >
> > > * Add ide_id_dma_bug() helper based on ide_dma_verbose() to check
> > > for invalid DMA info in identify block.
> > >
> > > * Use ide_id_dma_bug() in ide_tune_dma() and ide_driveid_update().
> > >
> > > As a result DMA won't be tuned or will be disabled after tuning
> > > if device reports inconsistent info about enabled DMA mode
> > > (ide_dma_verbose() does the same checks while the IDE device is
> > > probed by ide-{cd,disk} device driver).
> > >
> > > * Since (id->capability & 1) && id->tDMA is a valid configuration
> > > handle it correctly in ide_id_dma_bug().
> > >
> > > * Remove no longer needed ide_dma_verbose().
> > >
> > > This patch should fix the following problem with out-of-sync IDE
> > > messages reported by Nick Warned:
> > >
> > > hdd: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB
> > > Cache<7>hdd: skipping word 93 validity check
> > > , UDMA(66)
> > >
> > > and later debugged by Mark Lord to be caused by:
> > >
> > > ide_dma_verbose()
> > > printk( ... "2048kB Cache");
> > > eighty_ninty_three()
> > > printk(KERN_DEBUG "%s: skipping word 93 validity
> > > check\n"); ide_dma_verbose()
> > > printk(", UDMA(66)"
> > >
> > > Please note that as a result ide-{cd,disk} device drivers won't
> > > report the DMA speed used but this is intended since now DMA mode
> > > being used is always reported by IDE core code.
> > >
> > > Cc: Nick Warne <nick@xxxxxxxxx>
> > > Cc: Mark Lord <lkml@xxxxxx>
> > > Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>

~ skip

Nick
--
Free Software Foundation Associate Member 5508
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/