Re: [PATCH] x86_64: fix problems due to use of "outb" to port 80 onsome AMD64x2 laptops, etc.

[Alan Cox]

> a minor concern, but I did also point out that using an unused port 
> causes the bus to be tied up for a microsecond or two, which matters on 
> a fast SMP machine.

And I did point out I'd found locking cases that may be relying upon this

> I also note that curent machines like the problem machine have ACPI, and 
> maybe those would be the ones that vendors might start to define port 80 
> to mean something. As I noted, it /seems/ to be only when ACPI is turned 

Port 0x80 means debug. You appear to have a laptop with some kind of
buggy firmware that wants a BIOS update. Everyone use 0x80 for debug -
its in the chipset hardware quite often.

> My belief is that my machine has some device that is responding to port 
> 80 by doing something.  And that something requires some other program 
> to "service" port 80 in some way.  But it sure would be nice to know.   
> I can't personally sand off the top of the chipset to put probes into it 
> - so my normal approach of putting a logic analyzer on the bus doesn't work.

Almost certainly a SMI trap.

> PS: If I have time, I may try to build Rene's port 80 test for Windows 
> and run it under WinXP on this machine 

That would be very interesting.

Alan
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/