Re: RFC: outb 0x80 in inb_p, outb_p harmful on some modern AMD64 with MCP51 laptops

[Pavel Machek]

Hi!

> > modern CPU compared to the bus. But the delay really needs to be something
> > that is about IO port speed. Ok in theory you could try to measure
> > a outb using RDTSC and then use udelay, but first you would need
> 
> You don't need to. Port 0x80 historically is about 8uS so just udelay(8)
> and make sure the initial default delay is conservative enough before the
> CPU speed is computed.
> 
> 0x80 should be fine for anything PC compatible anyway, its specifically
> reserved as a debug port and supported for *exactly* that purpose by
> many chipsets.

Actually, I've seen few pci cards with leds on port 0x80, and I
wonder: is our outb_p really correct?

I mean, we expect 8usec delay -- historical ISA timing -- but when
_PCI_ card with leds is inserted, it is likely to be faster than old
ISA, right?
							Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/