RE: 2.6.23.1 - sata_mv (7042) hang with large file operations

From: Morrison, Tom
Date: Wed Nov 14 2007 - 13:09:24 EST


-----Original Message-----
From: Mark Lord [mailto:liml@xxxxxx]
Sent: Wednesday, November 14, 2007 12:57 PM
To: Morrison, Tom
Cc: Jeff Garzik; linux-ide@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
Subject: Re: 2.6.23.1 - sata_mv (7042) hang with large file operations

Morrison, Tom wrote:
>
<snip >
> The problem comes ONLY when I am doing large file operations
> (e.g.: just copying a file) to/from the SATA drives behind
> the subject line 7042....it just hangs after about 10-15
> seconds into the copy...
>
> How large a file causes the hang - you ask - well, somewhere
> between 100Meg & 500Meg...
>
<snip other drivel>


::: Can you give me exact details of how to set up and reproduce this?
::: -- Kernel version

Linux-2.6.23.1

NOTE: I am using ppc (arch/ppc instead of arch/powerpc)

::: -- number/config/model of drives

2x250GIG Western Digital - 3 partitions (largest (/dev/sda3
~200Gig - formatted to ext2).

7042 PEX on a MPC8548 Board

::: -- exact command line sequence to cause the failure

NFS mount root file system (I am currently rebuild to take away
the NFS file system dependency) - /dev/sda3 is drive in
question...

a) mount /dev/sda3 /mnt/src
b) cp large_500Meg_file /mnt/src/.

==========================================================
==========================================================
NOTE: this does NOT fail on a 2.6.11 kernel version!!!!
So I do NOT think it's a hardware problem!

It could be a PEX related problem with arch/ppc - I would
expect under heavy pounding with smaller files it would
fail as well - but it does NOT)
==========================================================
==========================================================

Anything else you need to know?

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/