PROBLEM: IM Kernel Failure 12/11/07
From: martinpeterclarke@xxxxxxxxxxxxx
Date: Wed Nov 14 2007 - 11:09:26 EST
This is the 5th attempt to email you! I keep being Greylisted! I've
extracted the minimal info from a zip which may be failing.
I've had to send it from my personal Tiscali account.
Regards
Martin
[1.] One line summary of the problem:
System crashed the night of Monday Nov 12 at 22:01
[2.] Full description of the problem/report:
There is a cronjob at that time
00 22 * * * . /usr/local/bin/backup_RCP_CVSROOT.sh >
/usr/local/bin/cvs_backup.log 2>&1
[3.] Keywords (i.e., modules, networking, kernel):
kernel
[4.] Kernel version (from /proc/version):
Linux version 2.4.9-e.38smp (bhcompile@xxxxxxxxxxxxxxxxxxxxxx) (gcc
version 2.96 20000731 (Red Hat Linux 7.2 2.96-124.7.2)) #1 SMP Wed Feb
11 00:09:01 EST 2004
[5.] Output of Oops.. message (if applicable) with symbolic
information resolved (see Documentation/oops-tracing.txt)
NO OOPS'ES !
vi ./usr/src/linux-2.4.9-e.3/Documentation/oops-tracing.txt
will investigate ... not ... intuitive at first read!
[6.] A small shell script or example program which triggers the
problem (if possible)
N/A
[7.] Environment
Er ... a Dell box I think!
[7.1.] Software (add the output of the ver_linux script here)
[root@pleco /]# sh ./usr/src/linux-2.4.9-e.3/scripts/ver_linux
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux pleco.investmaster.com 2.4.9-e.38smp #1 SMP Wed Feb 11 00:09:01
EST 2004 i686 unknown
Gnu C 2.96
Gnu make 3.79.1
binutils 2.11.90.0.8
util-linux 2.11f
mount 2.11g
modutils 2.4.13
e2fsprogs 1.26
reiserfsprogs 3.x.0j
PPP 2.4.1
isdn4k-utils 3.1pre1
Linux C Library 2.2.4
Dynamic linker (ldd) 2.2.4
Procps 2.0.7
Net-tools 1.60
Console-tools 0.3.3
Sh-utils 2.0.11
Modules Loaded soundcore ide-tape lp parport sr_mod ide-cd
cdrom sg esm autofs nfs lockd sunrpc ppp_async ppp_generic slhc tg3
ipchains st usb-ohci usbcore ext3 jbd aic7xxx sd_mod scsi_mod
[7.2.] Processor information (from vi /proc/cpuinfo):
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Xeon(TM) CPU 2.40GHz
stepping : 9
cpu MHz : 2386.846
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
bogomips : 4757.91
processor : 1
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Xeon(TM) CPU 2.40GHz
stepping : 9
cpu MHz : 2386.846
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
bogomips : 4771.02
processor : 2
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Xeon(TM) CPU 2.40GHz
stepping : 9
cpu MHz : 2386.846
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
bogomips : 4771.02
processor : 3
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Xeon(TM) CPU 2.40GHz
stepping : 9
cpu MHz : 2386.846
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
bogomips : 4771.02
[7.3.] Module information (from vi /proc/modules):
soundcore 7940 0 (autoclean)
ide-tape 61120 0 (autoclean)
lp 8192 0 (autoclean)
parport 38144 0 (autoclean) [lp]
sr_mod 17560 0 (autoclean) (unused)
ide-cd 35296 0 (autoclean)
cdrom 35520 0 (autoclean) [sr_mod ide-cd]
sg 35076 0 (autoclean)
esm 84239 1
autofs 13796 0 (autoclean) (unused)
nfs 98592 2 (autoclean)
lockd 61184 1 (autoclean) [nfs]
sunrpc 84432 1 (autoclean) [nfs lockd]
ppp_async 8480 1
ppp_generic 26664 3 [ppp_async]
slhc 6776 0 [ppp_generic]
tg3 50528 1
ipchains 47760 0
st 30548 0
usb-ohci 23456 0 (unused)
usbcore 68864 1 [usb-ohci]
ext3 70944 4
jbd 55444 4 [ext3]
aic7xxx 127200 5
sd_mod 13920 5
scsi_mod 126812 5 [sr_mod sg st aic7xxx sd_mod]
[7.4.] Loaded driver and hardware information (vi /proc/ioports, vi
/proc/iomem)
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
02f8-02ff : serial(auto)
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
08b0-08bf : ServerWorks CSB5 IDE Controller
08c0-08c7 : ServerWorks CSB5 IDE Controller
08c8-08cb : ServerWorks CSB5 IDE Controller
08d0-08d7 : ServerWorks CSB5 IDE Controller
08d8-08db : ServerWorks CSB5 IDE Controller
0cf8-0cff : PCI conf1
a000-afff : PCI Bus #05
a800-a8ff : Adaptec 7899P (#2)
a800-a8fe : aic7xxx
ac00-acff : Adaptec 7899P
ac00-acfe : aic7xxx
d800-d8ff : Adaptec 7899A (#2)
d800-d8fe : aic7xxx
dc00-dcff : Adaptec 7899A
dc00-dcfe : aic7xxx
e800-e8ff : ATI Technologies Inc Rage XL
ec80-ecbf : Dell Computer Corporation PowerEdge Expandable RAID
Controller 3/Di
ec80-ec87 : serial(set)
ece8-ecef : PCI device 1028:000c (Dell Computer Corporation)
ecf4-ecf7 : PCI device 1028:000d (Dell Computer Corporation)
ecf8-ecff : PCI device 1028:000c (Dell Computer Corporation)
[7.5.] PCI information ('lspci -vvv' as root)
00:00.0 Host bridge: ServerWorks: Unknown device 0014 (rev 33)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
00:00.1 Host bridge: ServerWorks: Unknown device 0014
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
00:00.2 Host bridge: ServerWorks: Unknown device 0014
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
00:04.0 Class ff00: Dell Computer Corporation: Unknown device 000c
Subsystem: Dell Computer Corporation: Unknown device 000c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 10
Interrupt: pin A routed to IRQ 19
Region 0: Memory at feb80000 (32-bit, prefetchable) [size=4K]
Region 1: I/O ports at ecf8 [size=8]
Region 2: I/O ports at ece8 [size=8]
Expansion ROM at fe000000 [disabled] [size=64K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,
D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.1 Class ff00: Dell Computer Corporation PowerEdge Expandable
RAID Controller 3/Di
Subsystem: Dell Computer Corporation PowerEdge Expandable RAID
Controller 3/Di
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 23
Region 0: Memory at fe102000 (32-bit, non-prefetchable)
[size=4K]
Region 1: I/O ports at ec80 [size=64]
Region 2: Memory at feb00000 (32-bit, prefetchable)
[size=512K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,
D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.2 Class ff00: Dell Computer Corporation: Unknown device 000d
Subsystem: Dell Computer Corporation: Unknown device 000d
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 27
Region 0: I/O ports at ecf4 [size=4]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,
D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0e.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev
27) (prog-if 00 [VGA])
Subsystem: Dell Computer Corporation: Unknown device 0121
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min), cache line size 10
Region 0: Memory at fd000000 (32-bit, non-prefetchable)
[size=16M]
Region 1: I/O ports at e800 [size=256]
Region 2: Memory at fe101000 (32-bit, non-prefetchable)
[size=4K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [5c] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,
D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 Host bridge: ServerWorks CSB5 South Bridge (rev 93)
Subsystem: ServerWorks CSB5 South Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
00:0f.1 IDE interface: ServerWorks CSB5 IDE Controller (rev 93) (prog-
if 82 [Master PriP])
Subsystem: ServerWorks CSB5 IDE Controller
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 0: I/O ports at 08c0 [size=8]
Region 1: I/O ports at 08c8 [size=4]
Region 2: I/O ports at 08d0 [size=8]
Region 3: I/O ports at 08d8 [size=4]
Region 4: I/O ports at 08b0 [size=16]
00:0f.2 USB Controller: ServerWorks OSB4/CSB5 OHCI USB Controller (rev
05) (prog-if 10 [OHCI])
Subsystem: ServerWorks OSB4/CSB5 OHCI USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (20000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at fe100000 (32-bit, non-prefetchable)
[size=4K]
00:0f.3 ISA bridge: ServerWorks: Unknown device 0225
Subsystem: ServerWorks: Unknown device 0230
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:10.0 Host bridge: ServerWorks: Unknown device 0101 (rev 05)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Capabilities: [60] PCI-X non-bridge device.
Command: DPERE- ERO- RBC=0 OST=4
Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-,
DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-
00:10.2 Host bridge: ServerWorks: Unknown device 0101 (rev 05)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Capabilities: [60] PCI-X non-bridge device.
Command: DPERE- ERO- RBC=0 OST=4
Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-,
DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-
00:11.0 Host bridge: ServerWorks: Unknown device 0101 (rev 05)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Capabilities: [60] PCI-X non-bridge device.
Command: DPERE- ERO- RBC=0 OST=4
Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-,
DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-
00:11.2 Host bridge: ServerWorks: Unknown device 0101 (rev 05)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Capabilities: [60] PCI-X non-bridge device.
Command: DPERE- ERO- RBC=0 OST=4
Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-,
DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-
01:08.0 SCSI storage controller: Adaptec 7899A (rev 01)
Subsystem: Adaptec: Unknown device f620
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (10000ns min, 6250ns max), cache line size 10
Interrupt: pin A routed to IRQ 20
BIST result: 00
Region 0: I/O ports at dc00 [size=256]
Region 1: Memory at fcf01000 (64-bit, non-prefetchable)
[size=4K]
Expansion ROM at fce00000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,
D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:08.1 SCSI storage controller: Adaptec 7899A (rev 01)
Subsystem: Adaptec: Unknown device f620
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (10000ns min, 6250ns max), cache line size 10
Interrupt: pin B routed to IRQ 21
BIST result: 00
Region 0: I/O ports at d800 [size=256]
Region 1: Memory at fcf00000 (64-bit, non-prefetchable)
[size=4K]
Expansion ROM at fce00000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,
D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
03:06.0 Ethernet controller: BROADCOM Corporation: Unknown device 16a7
(rev 02)
Subsystem: Dell Computer Corporation: Unknown device 0121
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (16000ns min), cache line size 10
Interrupt: pin A routed to IRQ 28
Region 0: Memory at fcd10000 (64-bit, non-prefetchable)
[size=64K]
Capabilities: [40] PCI-X non-bridge device.
Command: DPERE- ERO- RBC=0 OST=0
Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-,
DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,
D2-,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+
Queue=0/3 Enable-
Address: 3ccb5f8345104190 Data: 2bd9
03:08.0 Ethernet controller: BROADCOM Corporation: Unknown device 16a7
(rev 02)
Subsystem: Dell Computer Corporation: Unknown device 0121
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (16000ns min), cache line size 10
Interrupt: pin A routed to IRQ 29
Region 0: Memory at fcd00000 (64-bit, non-prefetchable)
[size=64K]
Capabilities: [40] PCI-X non-bridge device.
Command: DPERE- ERO+ RBC=0 OST=0
Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-,
DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,
D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+
Queue=0/3 Enable-
Address: 5cbcd7d402670c00 Data: e809
04:08.0 PCI bridge: Intel Corporation: Unknown device 0309 (rev 01)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 10
Bus: primary=04, secondary=05, subordinate=05, sec-latency=32
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fca00000-fcbfffff
Prefetchable memory behind bridge: fff00000-000fffff
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,
D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
05:06.0 SCSI storage controller: Adaptec 7899P (rev 01)
Subsystem: Dell Computer Corporation: Unknown device 0121
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (10000ns min, 6250ns max), cache line size 10
Interrupt: pin A routed to IRQ 30
BIST result: 00
Region 0: I/O ports at ac00 [size=256]
Region 1: Memory at fcaff000 (64-bit, non-prefetchable)
[size=4K]
Expansion ROM at fcb00000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,
D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
05:06.1 SCSI storage controller: Adaptec 7899P (rev 01)
Subsystem: Dell Computer Corporation: Unknown device 0121
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (10000ns min, 6250ns max), cache line size 10
Interrupt: pin B routed to IRQ 31
BIST result: 00
Region 0: I/O ports at a800 [size=256]
Region 1: Memory at fcafe000 (64-bit, non-prefetchable)
[size=4K]
Expansion ROM at fcb00000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,
D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
[7.6.] SCSI information (from vi /proc/scsi/scsi)
Attached devices:
Host: scsi0 Channel: 00 Id: 06 Lun: 00
Vendor: BNCHMARK Model: DLT1 Rev: 5538
Type: Sequential-Access ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 00 Lun: 00
Vendor: MAXTOR Model: ATLAS10K4_73SCA Rev: DFM0
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi2 Channel: 00 Id: 01 Lun: 00
Vendor: MAXTOR Model: ATLAS10K4_73SCA Rev: DFM0
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi2 Channel: 00 Id: 02 Lun: 00
Vendor: MAXTOR Model: ATLAS10K4_73SCA Rev: DFM0
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi2 Channel: 00 Id: 06 Lun: 00
Vendor: PE/PV Model: 1x5 SCSI BP Rev: 1.1
Type: Processor ANSI SCSI revision: 02
[7.7.] Other information that might be relevant to the problem (please
look in /proc and include all information that you think to be
relevant):
I dread to think!
[X.] Other notes, patches, fixes, workarounds:
extract from msgNov12.lis (attached)
[root@pleco sysconfig]# grep "Nov 12" /var/log/messages > msgNov12.
lis
Line no.
437 Nov 12 04:02:01 pleco syslogd 1.4.1: restart.
1282 Nov 12 11:42:05 pleco sshd(pam_unix)[18121]: session opened for
user oracle by (uid=0)
1373 Nov 12 12:36:03 pleco pam_rhosts_auth[18283]: allowed to
jnijjar@bloater as wmfo
1374 Nov 12 12:36:03 pleco rsh(pam_unix)[18283]: session opened for
user wmfo by (uid=0)
1375 Nov 12 12:36:03 pleco rsh(pam_unix)[18283]: session closed for
user wmfo
1376 Nov 12 12:36:03 pleco pam_rhosts_auth[18285]: allowed to
jnijjar@bloater as wmfo
1377 Nov 12 12:36:03 pleco rsh(pam_unix)[18285]: session opened for
user wmfo by (uid=0)
1378 Nov 12 12:36:03 pleco rsh(pam_unix)[18285]: session closed for
user wmfo
1379 Nov 12 12:36:03 pleco pam_rhosts_auth[18287]: allowed to
jnijjar@bloater as wmfo
1380 Nov 12 12:36:03 pleco rsh(pam_unix)[18287]: session opened for
user wmfo by (uid=0)
1381 Nov 12 12:36:03 pleco pam_rhosts_auth[18288]: allowed to
jnijjar@bloater as wmfo
1382 Nov 12 12:36:03 pleco rsh(pam_unix)[18288]: session opened for
user wmfo by (uid=0)
1383 Nov 12 12:36:03 pleco pam_rhosts_auth[18289]: allowed to
jnijjar@bloater as wmfo
1384 Nov 12 12:36:03 pleco rsh(pam_unix)[18289]: session opened for
user wmfo by (uid=0)
1385 Nov 12 12:36:03 pleco rsh(pam_unix)[18289]: session closed for
user wmfo
1386 Nov 12 12:36:03 pleco pam_rhosts_auth[18292]: allowed to
jnijjar@bloater as wmfo
1387 Nov 12 12:36:03 pleco rsh(pam_unix)[18292]: session opened for
user wmfo by (uid=0)
1388 Nov 12 12:36:03 pleco rsh(pam_unix)[18292]: session closed for
user wmfo
1389 Nov 12 12:36:03 pleco pam_rhosts_auth[18295]: allowed to
jnijjar@bloater as wmfo
1390 Nov 12 12:36:04 pleco rsh(pam_unix)[18295]: session opened for
user wmfo by (uid=0)
1391 Nov 12 12:36:06 pleco rsh(pam_unix)[18295]: session closed for
user wmfo
1392 Nov 12 12:36:06 pleco pam_rhosts_auth[18362]: allowed to
jnijjar@bloater as wmfo
1393 Nov 12 12:36:06 pleco rsh(pam_unix)[18362]: session opened for
user wmfo by (uid=0)
1394 Nov 12 12:36:09 pleco rsh(pam_unix)[18362]: session closed for
user wmfo
1395 Nov 12 12:36:09 pleco pam_rhosts_auth[18417]: allowed to
jnijjar@bloater as wmfo
1396 Nov 12 12:36:09 pleco rsh(pam_unix)[18417]: session opened for
user wmfo by (uid=0)
1397 Nov 12 12:36:22 pleco rsh(pam_unix)[18417]: session closed for
user wmfo
1398 Nov 12 12:36:22 pleco pam_rhosts_auth[18510]: allowed to
jnijjar@bloater as wmfo
1399 Nov 12 12:36:22 pleco rsh(pam_unix)[18510]: session opened for
user wmfo by (uid=0)
1400 Nov 12 12:36:22 pleco rsh(pam_unix)[18510]: session closed for
user wmfo
1401 Nov 12 12:36:22 pleco pam_rhosts_auth[18513]: allowed to
jnijjar@bloater as wmfo
1402 Nov 12 12:36:22 pleco rsh(pam_unix)[18513]: session opened for
user wmfo by (uid=0)
1403 Nov 12 12:36:22 pleco pam_rhosts_auth[18514]: allowed to
jnijjar@bloater as wmfo
1404 Nov 12 12:36:22 pleco rsh(pam_unix)[18514]: session opened for
user wmfo by (uid=0)
1549 Nov 12 13:55:02 pleco login(pam_unix)[18605]: authentication
failure; logname= uid=0 euid=0 tty=pts/2 ruser= rhost=portwrinkle
user=cvsadmin
1550 Nov 12 13:55:04 pleco login[18605]: FAILED LOGIN 1 FROM
portwrinkle FOR cvsadmin, Authentication failure
1551 Nov 12 13:55:16 pleco login[18605]: FAILED LOGIN 2 FROM
portwrinkle FOR cvsadmin, Authentication failure
1552 Nov 12 13:56:32 pleco login(pam_unix)[18609]: session opened
for user cvsadmin by (uid=0)
1553 Nov 12 13:56:32 pleco -- cvsadmin[18609]: LOGIN ON pts/2 BY
cvsadmin FROM portwrinkle
1788 Nov 12 15:59:30 pleco su(pam_unix)[18908]: session opened for
user root by oracle(uid=502)
1789 Nov 12 16:00:21 pleco su(pam_unix)[18908]: session closed for
user root
1790 Nov 12 16:00:44 pleco su(pam_unix)[18978]: session opened for
user root by oracle(uid=502)
1809 Nov 12 16:04:32 pleco su(pam_unix)[19029]: session opened for
user oracle by oracle(uid=0)
1810 Nov 12 16:04:32 pleco su(pam_unix)[19029]: session closed for
user oracle
1811 Nov 12 16:04:32 pleco vncserver: vncserver shutdown failed
1812 Nov 12 16:04:42 pleco su(pam_unix)[19051]: session opened for
user oracle by oracle(uid=0)
1813 Nov 12 16:04:42 pleco su: A VNC server is already running as :1
1814 Nov 12 16:04:42 pleco su(pam_unix)[19051]: session closed for
user oracle
1815 Nov 12 16:04:43 pleco vncserver: vncserver start failed
1816 Nov 12 16:04:54 pleco su(pam_unix)[19073]: session opened for
user oracle by oracle(uid=0)
1817 Nov 12 16:04:54 pleco su(pam_unix)[19073]: session closed for
user oracle
1818 Nov 12 16:04:54 pleco vncserver: vncserver shutdown failed
1819 Nov 12 16:04:55 pleco su(pam_unix)[18978]: session closed for
user root
1820 Nov 12 16:05:10 pleco su(pam_unix)[19082]: session opened for
user root by oracle(uid=502)
1821 Nov 12 16:05:14 pleco su(pam_unix)[19124]: session opened for
user oracle by oracle(uid=0)
1822 Nov 12 16:05:14 pleco su(pam_unix)[19124]: session closed for
user oracle
1823 Nov 12 16:05:14 pleco vncserver: vncserver shutdown failed
1824 Nov 12 16:05:19 pleco su(pam_unix)[19146]: session opened for
user oracle by oracle(uid=0)
1825 Nov 12 16:05:20 pleco su: A VNC server is already running as :1
1826 Nov 12 16:05:20 pleco su(pam_unix)[19146]: session closed for
user oracle
1827 Nov 12 16:05:20 pleco vncserver: vncserver start failed
1828 Nov 12 16:05:26 pleco su(pam_unix)[19082]: session closed for
user root
1829 Nov 12 16:05:28 pleco sshd(pam_unix)[18121]: session closed for
user oracle
2014 Nov 12 17:29:37 pleco sshd(pam_unix)[19263]: session opened for
user oracle by (uid=0)
2059 Nov 12 17:47:10 pleco su(pam_unix)[19329]: session opened for
user root by oracle(uid=502)
2060 Nov 12 17:48:21 pleco su(pam_unix)[19329]: session closed for
user root
2071 Nov 12 17:52:02 pleco gnome-name-server[19450]: starting
2072 Nov 12 17:52:02 pleco gnome-name-server[19450]: name server
starting
2077 Nov 12 17:52:04 pleco gconfd (oracle-19457): starting (version
1.0.4), pid 19457 user 'oracle'
2078 Nov 12 17:52:04 pleco gconfd (oracle-19457): Successfully
registered `OAFIID:gconfd:19991118'
2079 Nov 12 17:52:04 pleco gconfd (oracle-19457): Unable to open
saved state file '/usr/oracle/.gconfd/saved_state': No such file or
directory
2080 Nov 12 17:52:04 pleco xinetd[19469]: warning: can't get client
address: Transport endpoint is not connected
2089 Nov 12 17:57:04 pleco gconfd (oracle-19457): 1 items remain in
the cache after cleaning already-synced items older than 300 seconds
2198 Nov 12 18:46:45 pleco su(pam_unix)[19650]: session opened for
user root by oracle(uid=502)
2199 Nov 12 18:46:54 pleco su(pam_unix)[19650]: session closed for
user root
2200 Nov 12 18:47:34 pleco sshd(pam_unix)[19263]: session closed for
user oracle
2247 Nov 12 19:06:54 pleco sshd(pam_unix)[19997]: session opened for
user oracle by (uid=0)
2272 Nov 12 19:13:26 pleco su(pam_unix)[20050]: session opened for
user root by oracle(uid=502)
2273 Nov 12 19:13:34 pleco su(pam_unix)[20092]: session opened for
user oracle by oracle(uid=0)
2274 Nov 12 19:13:34 pleco gnome-name-server[19450]: input condition
is: 0x11, exiting
2275 Nov 12 19:13:34 pleco su(pam_unix)[20092]: session closed for
user oracle
2276 Nov 12 19:13:34 pleco vncserver: vncserver shutdown succeeded
2277 Nov 12 19:14:03 pleco su(pam_unix)[20132]: session opened for
user oracle by oracle(uid=0)
2278 Nov 12 19:14:06 pleco su:
2279 Nov 12 19:14:06 pleco su: New 'X' desktop is pleco.investmaster.
com:2
2280 Nov 12 19:14:06 pleco su:
2281 Nov 12 19:14:06 pleco su: Starting ap plications specified in
/usr/oracle/.vnc/xstartup
2282 Nov 12 19:14:06 pleco su: Log file is/usr/oracle/.vnc/pleco.
investmaster.com:2.log
2283 Nov 12 19:14:06 pleco su:
2284 Nov 12 19:14:06 pleco su(pam_unix)[20 132]: session closed for
user oracle
2285 Nov 12 19:14:06 pleco vncserver: vncserver startup succeeded
2286 Nov 12 19:14:09 pleco gnome-name-server[20198]: starting
2287 Nov 12 19:14:09 pleco gnome-name-server[20198]: name server
starting
2288 Nov 12 19:14:12 pleco su(pam_unix)[20050]: session closed for
user root
2289 Nov 12 19:14:25 pleco su(pam_unix)[20325]: session opened for
user root by oracle(uid=502)
2290 Nov 12 19:14:33 pleco su(pam_unix)[20325]: session closed for
user root
2291 Nov 12 19:14:38 pleco sshd(pam_unix)[19997]: session closed for
user oracle
2292 Nov 12 19:17:04 pleco gconfd (oracle-19457): 1 items remain in
the cache after cleaning already-synced items older than 300 seconds
2639 Nov 12 22:01:37 pleco kernel: Unable to handle kernel paging
request at virtual address 1aaf2008
2640 Nov 12 22:01:37 pleco kernel: printing eip:
2641 Nov 12 22:01:37 pleco kernel: c01315df
2642 Nov 12 22:01:37 pleco kernel: *pde = 0
2643 Nov 12 22:01:37 pleco kernel: Oops: 00
2644 Nov 12 22:01:37 pleco kernel: Kernel 2.4.9-e.38smp
2645 Nov 12 22:01:37 pleco kernel: CPU: 0
2646 Nov 12 22:01:37 pleco kernel: EIP: 0010:
[do_generic_file_read+463/1680] Tainted: P
2647 Nov 12 22:01:37 pleco kernel: EIP: 0010:[<c01315df>]
Tainted: P
2648 Nov 12 22:01:37 pleco kernel: EFLAGS: 10206
2649 Nov 12 22:01:37 pleco kernel: EIP isat do_generic_file_read
[kernel] 0x1cf
2650 Nov 12 22:01:37 pleco kernel: eax: 1aaf2000 ebx: 00000001
ecx: 00000013 edx: f77d5378
2651 Nov 12 22:01:37 pleco kernel: esi: 00000000 edi: e43e8d38
ebp: 00000000 esp: e2525ef8
2652 Nov 12 22:01:37 pleco kernel: ds: 0018 es: 0018 ss: 0018
2653 Nov 12 22:01:37 pleco kernel: Processtar (pid: 20836,
stackpage=e2525000)
2654 Nov 12 22:01:37 pleco kernel: Stack: 00001000 f77d537c 00000001
00000000 00000000 e43e8c80 00000322 e43e8c80
2655 Nov 12 22:01:37 pleco kernel: 00000004 00008001 00000000
0806f528 00000000 00001600 c0131c27 cc263bc0
2656 Nov 12 22:01:37 pleco kernel: cc263be0 e2525f48 c0131aa0
00000000 00000000 00001600 0806f528 00000000
2657 Nov 12 22:01:37 pleco kernel: Call Trace:
[generic_file_new_read+103/128] generic_file_new_read [kernel] 0x67
(0xe2525f30)
2658 Nov 12 22:01:37 pleco kernel: Call Trace: [<c0131c27>]
generic_file_new_read [kernel] 0x67 (0xe2525f30)
2659 Nov 12 22:01:37 pleco kernel: [file_read_actor+0/256]
file_read_actor [kernel] 0x0 (0xe2525f40)
2660 Nov 12 22:01:37 pleco kernel: [<c0131aa0>] file_read_actor
[kernel] 0x0 (0xe2525f40)
2661 Nov 12 22:01:38 pleco kernel: [generic_file_read+27/32]
generic_file_read [kernel] 0x1b (0xe2525f64)
2662 Nov 12 22:01:38 pleco kernel: [<c0131bbb>] generic_file_read
[kernel] 0x1b (0xe2525f64)
2663 Nov 12 22:01:38 pleco kernel: [sys_red+150/288] sys_read
[kernel] 0x96 (0xe2525f7c)
2664 Nov 12 22:01:38 pleco kernel: [<c0145cd6>] sys_read [kernel]
0x96 (0xe2525f7c)
2665 Nov 12 22:01:38 pleco kernel: [sys_open+149/224] sys_open
[kernel] 0x95 (0xe2525fa4)
2666 Nov 12 22:01:38 pleco kernel: [<c01456e5>] sys_open [kernel]
0x95 (0xe2525fa4)
2667 Nov 12 22:01:38 pleco kernel: [system_call+51/56] system_call
[kernel] 0x33 (0xe2525fc0)
2668 Nov 12 22:01:38 pleco kernel: [<c01073e3>] system_call [kernel]
0x33 (0xe2525fc0)
2669 Nov 12 22:01:38 pleco kernel:
2670 Nov 12 22:01:38 pleco kernel:
2671 Nov 12 22:01:38 pleco kernel: Code: 3 9 78 08 75 f4 39 68 0c 75
ef 89 c6 85 f6 0f 84 8d 02 00 00
Nov 13 14:36:33 pleco syslogd 1.4.1: restart.
Martin Peter Clarke - Oracle DBA
Investmaster Group Ltd
5 Granville Road
Leicester
LE1 7RU
Direct Line: +44 (0)116 224 5033
Mob: +44 (0)7776 306523
Switchboard: +44 (0)116 233 5050
Fax: +44 (0)116 255 0822
__________________________________________________
Get an exclusive discount on Norton 360 from Tiscali
http://www.tiscali.co.uk/products/securepc
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/