Re: ti_usb_3410_5052 breakage in 2.6.24-rc1

[Steven King]

Per a suggestion by David Brownwell, rebuilt with CONFIG_USB_DEBUG enabled and 
loading usbserial and ti_usb_3410_5052 with debug=1, I see in 'dmesg'

'drivers/usb/serial/usb-serial.c: wrong number of endpoints'

 which is pretty much what I expected, throwing some more printk's in 
usb-serial gives:

drivers/usb/serial/usb-serial.c: num_interrupt_in = 0, expected 1
drivers/usb/serial/usb-serial.c: num_interrupt_out = 0, expected 0
drivers/usb/serial/usb-serial.c: num_bulk_in = 0, expected 1
drivers/usb/serial/usb-serial.c: num_bulk_out = 1, expected 1

Okay, so
---

Changing num_interrupt_in and num_bulk_in from 1 to NUM_DONT_CARE makes 
ti_usb_3410_5052 work again, but is it the right thing to do?

Signed-off-by: Steven King <sfking@xxxxxxxxx>
---
 ti_usb_3410_5052.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/serial/ti_usb_3410_5052.c 
b/drivers/usb/serial/ti_usb_3410_5052.c
index 1f01494..337f5ce 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -264,8 +264,8 @@ static struct usb_serial_driver ti_1port_device = {
 	.description		= "TI USB 3410 1 port adapter",
 	.usb_driver		= &ti_usb_driver,
 	.id_table		= ti_id_table_3410,
-	.num_interrupt_in	= 1,
-	.num_bulk_in		= 1,
+	.num_interrupt_in	= NUM_DONT_CARE,
+	.num_bulk_in		= NUM_DONT_CARE,
 	.num_bulk_out		= 1,
 	.num_ports		= 1,
 	.attach			= ti_startup,
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/