Re: 2.6.23-rc7-mm1 AHCI ATA errors -- won't boot
From: Berck E. Nash
Date: Tue Sep 25 2007 - 22:26:28 EST
Jeff Garzik wrote:
> Does the attached patch change behavior at all? You should be able to
> apply it on top of libata-dev.git#upstream or -mm.
Still broken, dmesg with ATA_DEBUG defined, attached.
[ 0.000000] Linux version 2.6.23-rc8-mm1 (root@luna) (gcc version 4.2.1 (Debian 4.2.1-5)) #1 SMP Tue Sep 25 20:11:10 MDT 2007
[ 0.000000] Command line: root=/dev/sde1 ro console=tty0 console=ttyS0,115200n8 BOOT_IMAGE=vmlinuz
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff80000 (usable)
[ 0.000000] BIOS-e820: 000000003ff80000 - 000000003ff8e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ff8e000 - 000000003ffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ffe0000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP 000FAF20, 0024 (r2 ACPIAM)
[ 0.000000] ACPI: XSDT 3FF80100, 0064 (r1 NEC 3000707 MSFT 97)
[ 0.000000] ACPI: FACP 3FF80290, 00F4 (r3 A_M_I_ OEMFACP 3000707 MSFT 97)
[ 0.000000] ACPI: DSDT 3FF80590, 9560 (r1 A0543 A0543000 0 INTL 20060113)
[ 0.000000] ACPI: FACS 3FF8E000, 0040
[ 0.000000] ACPI: APIC 3FF80390, 0080 (r1 A_M_I_ OEMAPIC 3000707 MSFT 97)
[ 0.000000] ACPI: SLIC 3FF80410, 0176 (r1 NEC 3000707 MSFT 97)
[ 0.000000] ACPI: OEMB 3FF8E040, 0066 (r1 A_M_I_ AMI_OEM 3000707 MSFT 97)
[ 0.000000] ACPI: HPET 3FF89AF0, 0038 (r1 A_M_I_ OEMHPET 3000707 MSFT 97)
[ 0.000000] ACPI: MCFG 3FF89B30, 003C (r1 A_M_I_ OEMMCFG 3000707 MSFT 97)
[ 0.000000] ACPI: SSDT 3FF8E0B0, 01C6 (r1 AMI CPU1PM 1 INTL 20060113)
[ 0.000000] ACPI: SSDT 3FF8E280, 013A (r1 AMI CPU2PM 1 INTL 20060113)
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 262016
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bfb00000)
[ 0.000000] .eh_frame_hdr for 'kernel' present but unusable
[ 0.000000] PERCPU: Allocating 28328 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257187
[ 0.000000] Kernel command line: root=/dev/sde1 ro console=tty0 console=ttyS0,115200n8 BOOT_IMAGE=vmlinuz
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] TSC calibrated against HPET
[ 0.000000] time.c: Detected 2564.906 MHz processor.
[ 0.006666] Console: colour VGA+ 80x25
[ 0.006666] console [tty0] enabled
[ 0.009999] console [ttyS0] enabled
[ 0.013333] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.016666] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.019999] Checking aperture...
[ 0.029999] Memory: 1026692k/1048064k available (2448k kernel code, 20804k reserved, 1590k data, 224k init)
[ 0.116666] Calibrating delay using timer specific routine.. 5134.53 BogoMIPS (lpj=8554463)
[ 0.123333] Mount-cache hash table entries: 256
[ 0.129999] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.133333] CPU: L2 cache: 2048K
[ 0.136666] using mwait in idle threads.
[ 0.139999] CPU: Physical Processor ID: 0
[ 0.143333] CPU: Processor Core ID: 0
[ 0.146666] CPU0: Thermal monitoring enabled (TM2)
[ 0.149999] Freeing SMP alternatives: 27k freed
[ 0.153333] ACPI: Core revision 20070126
[ 0.196666] Using local APIC timer interrupts.
[ 0.203333] Detected 22.900 MHz APIC timer.
[ 0.206666] Booting processor 1/2 APIC 0x1
[ 0.219999] Initializing CPU#1
[ 0.303333] Calibrating delay using timer specific routine.. 5131.57 BogoMIPS (lpj=8549719)
[ 0.303333] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.303333] CPU: L2 cache: 2048K
[ 0.303333] CPU: Physical Processor ID: 0
[ 0.303333] CPU: Processor Core ID: 1
[ 0.303333] CPU1: Thermal monitoring enabled (TM2)
[ 0.303333] Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz stepping 06
[ 0.303333] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.306666] Brought up 2 CPUs
[ 0.309999] net_namespace: 112 bytes
[ 0.313531] NET: Registered protocol family 16
[ 0.318112] ACPI: bus type pci registered
[ 0.322207] PCI: Using configuration type 1
[ 0.337398] ACPI: Interpreter enabled
[ 0.341098] ACPI: Using IOAPIC for interrupt routing
[ 0.346136] PCI: MCFG configuration 0: base 4026531840 segment 0 buses 0 - 63
[ 0.355363] PCI: MCFG area at f0000000 reserved in ACPI motherboard resources
[ 0.363718] PCI: Using MMCONFIG at f0000000 - f3ffffff
[ 0.374808] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.379945] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.386433] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.392739] PCI: Transparent bridge - 0000:00:1e.0
[ 0.400270] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.407971] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.415675] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.423374] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.431067] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.438758] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.451973] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.459665] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.467354] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 1B, should be 12 [20070126]
[ 0.477153] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.482867] pnp: PnP ACPI init
[ 0.485963] ACPI: bus type pnp registered
[ 0.492544] pnp: PnP ACPI: found 15 devices
[ 0.496765] ACPI: ACPI bus type pnp unregistered
[ 0.501556] SCSI subsystem initialized
[ 0.505409] PCI: Using ACPI for IRQ routing
[ 0.509635] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.531058] DMAR:No DMAR devices found
[ 0.534852] PCI-GART: No AMD northbridge found.
[ 0.539423] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.544509] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.551056] Time: tsc clocksource has been installed.
[ 0.556149] Switched to high resolution mode on CPU 1
[ 0.556152] Switched to high resolution mode on CPU 0
[ 0.571142] pnp: 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[ 0.578140] pnp: 00:07: ioport range 0x290-0x297 has been reserved
[ 0.584355] pnp: 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.591351] pnp: 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.598350] pnp: 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
[ 0.605348] pnp: 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved
[ 0.612707] pnp: 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.619701] pnp: 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.627058] pnp: 00:0d: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.634055] pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.640531] pnp: 00:0e: iomem range 0xc0000-0xdffff has been reserved
[ 0.647009] pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 0.653827] pnp: 00:0e: iomem range 0x100000-0x3fffffff could not be reserved
[ 0.661200] PCI: Bridge: 0000:00:01.0
[ 0.664902] IO window: disabled.
[ 0.668341] MEM window: faa00000-feafffff
[ 0.672557] PREFETCH window: cff00000-efefffff
[ 0.677210] PCI: Bridge: 0000:00:1c.0
[ 0.680907] IO window: disabled.
[ 0.684347] MEM window: disabled.
[ 0.687872] PREFETCH window: cfe00000-cfefffff
[ 0.692524] PCI: Bridge: 0000:00:1c.3
[ 0.696222] IO window: c000-cfff
[ 0.699955] MEM window: fa900000-fa9fffff
[ 0.704174] PREFETCH window: disabled.
[ 0.708132] PCI: Bridge: 0000:00:1c.5
[ 0.711830] IO window: b000-bfff
[ 0.715269] MEM window: fa800000-fa8fffff
[ 0.719488] PREFETCH window: disabled.
[ 0.723446] PCI: Bridge: 0000:00:1e.0
[ 0.727144] IO window: a000-afff
[ 0.730583] MEM window: fa600000-fa7fffff
[ 0.734800] PREFETCH window: 50000000-500fffff
[ 0.739459] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.746952] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.754445] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
[ 0.761939] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
[ 0.769452] NET: Registered protocol family 2
[ 0.804350] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.811710] TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
[ 0.820186] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.827405] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.834057] TCP reno registered
[ 0.845147] audit: initializing netlink socket (disabled)
[ 0.850593] audit(1190751453.800:1): initialized
[ 0.855405] Loading Reiser4. See www.namesys.com for a description of Reiser4.
[ 0.862753] io scheduler noop registered
[ 0.866727] io scheduler cfq registered (default)
[ 0.872372] assign_interrupt_mode Found MSI capability
[ 0.877636] assign_interrupt_mode Found MSI capability
[ 0.882944] assign_interrupt_mode Found MSI capability
[ 0.888226] assign_interrupt_mode Found MSI capability
[ 0.893583] input: Power Button (FF) as /class/input/input0
[ 0.899191] ACPI: Power Button (FF) [PWRF]
[ 0.903393] input: Power Button (CM) as /class/input/input1
[ 0.909004] ACPI: Power Button (CM) [PWRB]
[ 0.913359] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._OSC] (Node ffff810002057b30), AE_ALREADY_EXISTS
[ 0.925187] ACPI: Marking method _OSC as Serialized
[ 0.930227] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._PDC] (Node ffff810002057b50), AE_ALREADY_EXISTS
[ 0.942060] ACPI: Marking method _PDC as Serialized
[ 0.947284] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.953680] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._OSC] (Node ffff810002057a10), AE_ALREADY_EXISTS
[ 0.965508] ACPI: Marking method _OSC as Serialized
[ 0.970543] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._PDC] (Node ffff810002057a30), AE_ALREADY_EXISTS
[ 0.982371] ACPI: Marking method _PDC as Serialized
[ 0.987582] ACPI: Processor [CPU2] (supports 8 throttling states)
[ 1.021742] Real Time Clock Driver v1.12ac
[ 1.026375] intel_rng: FWH not detected
[ 1.030595] Linux agpgart interface v0.102
[ 1.034742] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
[ 1.042728] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.049102] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.054977] ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 1.272479] scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
[ 1.272480] <Adaptec 2940 Ultra2 SCSI adapter>
[ 1.272481] aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
[ 1.272482]
[ 1.293422] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 23
[ 1.301271] ata_host_alloc: ENTER
[ 1.304634] ata_port_alloc: ENTER
[ 1.307989] ata_port_alloc: ENTER
[ 1.311343] ata_port_alloc: ENTER
[ 1.314704] ata_port_alloc: ENTER
[ 1.553158] scsi 0:0:1:0: Direct-Access IBM-PCCO ST39102LC !# B219 PQ: 0 ANSI: 2
[ 1.561296] scsi0:A:1:0: Tagged Queuing enabled. Depth 8
[ 1.566782] target0:0:1: Beginning Domain Validation
[ 1.578308] target0:0:1: wide asynchronous
[ 1.587229] target0:0:1: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 15)
[ 1.598475] target0:0:1: Domain Validation skipping write tests
[ 1.604520] target0:0:1: Ending Domain Validation
[ 1.612367] scsi 0:0:2:0: Direct-Access SGI SEAGATE ST39102L 2702 PQ: 0 ANSI: 2
[ 1.620506] scsi0:A:2:0: Tagged Queuing enabled. Depth 8
[ 1.625990] target0:0:2: Beginning Domain Validation
[ 1.636363] target0:0:2: wide asynchronous
[ 1.644463] target0:0:2: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 15)
[ 1.654889] target0:0:2: Domain Validation skipping write tests
[ 1.660932] target0:0:2: Ending Domain Validation
[ 2.316829] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 2.324959] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 2.331805] __ata_port_freeze: ata4294967295 port frozen
[ 2.337168] __ata_port_freeze: ata4294967295 port frozen
[ 2.342539] __ata_port_freeze: ata4294967295 port frozen
[ 2.347909] __ata_port_freeze: ata4294967295 port frozen
[ 2.353278] scsi1 : ahci
[ 2.355887] scsi2 : ahci
[ 2.358500] scsi3 : ahci
[ 2.361107] scsi4 : ahci
[ 2.363708] ata1: SATA max UDMA/133 abar m1024@0xfebfb800 port 0xfebfb900 irq 315
[ 2.371238] ata2: SATA max UDMA/133 abar m1024@0xfebfb800 port 0xfebfb980 irq 315
[ 2.378762] ata3: SATA max UDMA/133 abar m1024@0xfebfb800 port 0xfebfba00 irq 315
[ 2.386290] ata4: SATA max UDMA/133 abar m1024@0xfebfb800 port 0xfebfba80 irq 315
[ 2.393817] ata_host_register: probe begin
[ 2.397952] ata_port_schedule_eh: port EH scheduled
[ 2.402872] ata_scsi_error: ENTER
[ 2.406223] ata_port_flush_task: ENTER
[ 2.410011] ata_eh_link_autopsy: ENTER
[ 2.413794] ata_eh_recover: ENTER
[ 2.417145] __ata_port_freeze: ata1 port frozen
[ 2.733272] ahci_do_softreset: ENTER
[ 2.896512] ata_dev_classify: found ATA device by sig
[ 2.901597] ahci_do_softreset: EXIT, class=1
[ 2.905901] ata_std_postreset: ENTER
[ 2.909513] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.915725] ata_std_postreset: EXIT
[ 2.919248] ata_eh_thaw_port: ata1 port thawed
[ 2.923727] ata_eh_revalidate_and_attach: ENTER
[ 2.928314] ata_sg_setup: 1 sg elements mapped
[ 2.933522] ata_port_flush_task: ENTER
[ 2.937369] ata_port_flush_task: ENTER
[ 2.941155] ata1.00: ATA-7: ST3250823AS, 3.03, max UDMA/133
[ 2.946760] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.953660] ata_dev_set_xfermode: set features - xfer mode
[ 2.959279] ata_port_flush_task: ENTER
[ 2.963069] ata_dev_set_xfermode: EXIT, err_mask=0
[ 2.967914] ata_sg_setup: 1 sg elements mapped
[ 2.973100] ata_port_flush_task: ENTER
[ 2.976950] ata_port_flush_task: ENTER
[ 2.980738] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 2.991591] ata1.00: configured for UDMA/133
[ 2.995896] ata_eh_recover: EXIT, rc=0
[ 2.999680] ata_scsi_error: EXIT
[ 3.002946] ata_port_schedule_eh: port EH scheduled
[ 3.002947] ata_scsi_error: ENTER
[ 3.002949] ata_port_flush_task: ENTER
[ 3.014992] ata_eh_link_autopsy: ENTER
[ 3.018779] ata_eh_recover: ENTER
[ 3.022130] __ata_port_freeze: ata2 port frozen
[ 3.339623] ahci_do_softreset: ENTER
[ 3.502887] ata_dev_classify: fod_ ATA device by sig
[ 3.507977] ahci_do_softreset: EXIT, class=1
[ 3.512280] ata_std_postreset: ENTER
[ 3.515893] ata2: SATA link up 3.0 Gbps (SStatus 123 SCont 3300)
[ 3.522105] ata_std_postreset: EXIT
[ 3.525628] ata_eh_thaw_port: ata2 port thawed
[ 3.530106] ata_eh_revalidate_an_0attach: ENTER
[ 3.534695] ata_sg_setup: 1 sg elements mapped
[ 4.751938] sd 0:0:1:0: [sda] 17774160 512-byte hardware sectors (9100 MB)
[ 4.760821] sd 0:0:1:0: [sda] Write Protect is off
[ 4.767221] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 4.776605] sd 0:0:1:0: [sda] 17774160 512-byte hardware sectors (9100 MB)
[ 4.785488] sd 0:0:1:0: [sda] Write Protect is off
[ 4.791900] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 4.800470] sda: sda1 sda2
[ 4.811450] sd 0:0:1:0: [sda] Attached SCSI disk
[ 4.816162] sd 0:0:1:0: Attached scsi generic sg0 type 0
[ 4.822332] sd 0:0:2:0: [sdb] 17781520 512-byte hardware sectors (9104 MB)
[ 4.832615] sd 0:0:2:0: [sdb] Write Protect is off
[ 4.841211] sd 0:0:2:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 4.850578] sd 0:0:2:0: [sdb] 17781520 512-byte hardware sectors (9104 MB)
[ 4.860855] sd 0:0:2:0: [sdb] Write Protect is off
[ 4.869451] sd 0:0:2:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 4.878017] sdb: sdb1
[ 4.890330] sd 0:0:2:0: [sdb] Attached SCSI disk
[ 4.895028] sd 0:0:2:0: Attached scsi generic sg1 type 0
[ 33.520602] ata_port_flush_task: ENTER
[ 33.524392] __ata_port_freeze: ata2 port frozen
[ 33.528953] ata2.00: qc timeout (cmd 0xec)
[ 33.533087] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[ 33.539210] ata_eh_revalidate_and_attach: EXIT rc=-5
[ 33.544207] ata2: failed to recover some devices, retrying in 5 secs
[ 38.551318] __ata_port_freeze: ata2 port frozen
[ 38.555888] ahci_hardreset: ENTER
[ 38.559240] sata_std_hardreset: ENTER
[ 38.562937] sata_link_hardreset: ENTER
[ 38.884474] sata_link_hardreset: EXIT, rc=0
[ 44.051785] ata2: port is slow to respond, please be patient (Status 0x80)
[ 48.589425] ata2: COMRESET failed (errno=-16)
[ 48.593817] ahci_hardreset: EXIT, rc=-16, class=5
[ 48.598554] ahci_hardreset: ENTER
[ 48.601905] sata_std_hardreset: ENTER
[ 48.605604] sata_link_hardreset: ENTER
[ 48.925920] sata_link_hardreset: EXIT, rc=0
[ 49.295725] ata_dev_classify: found ATA device by sig
[ 49.300810] sata_std_hardreset: EXIT, class=1
[ 49.305201] ata_dev_classify: found ATA device by sig
[ 49.310285] ahci_hardreset: EXIT, rc=0, class=1
[ 49.314849] ata_std_postreset: ENTER
[ 49.318461] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 49.324673] ata_std_postreset: EXIT
[ 49.328196] ata_eh_thaw_port: ata2 port thawed
[ 49.332674] ata_eh_revalidate_and_attach: ENTER
[ 49.337262] ata_sg_setup: 1 sg elements mapped
[ 49.341772] ata_port_flush_task: ENTER
[ 49.345571] ata2.00: ATA-6: Config Disk, RGL10364, max UDMA/133
[ 49.351609] ata2.00: 640 sectors, multi 1: LBA
[ 49.356173] ata_dev_set_xfermode: set features - xfer mode
[ 49.361710] ata_port_flush_task: ENTER
[ 49.365493] ata_dev_set_xfermode: EXIT, err_mask=0
[ 49.370341] ata_sg_setup: 1 sg elements mapped
[ 49.374850] ata_port_flush_task: ENTER
[ 49.378639] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 49.384246] ata2.00: configured for UDMA/133
[ 49.388549] ata_eh_recover: EXIT, rc=0
[ 49.392337] ata_eh_link_autopsy: ENTER
[ 49.396120] ata_eh_link_autopsy: EXIT
[ 49.399817] ata_eh_recover: ENTER
[ 49.403169] ata_eh_revalidate_and_attach: ENTER
[ 49.407734] ata_eh_recover: EXIT, rc=0
[ 49.411522] ata_scsi_error: EXIT
[ 49.422330] ata_port_schedule_eh: port EH scheduled
[ 49.427244] ata_scsi_error: ENTER
[ 49.430592] ata_port_flush_task: ENTER
[ 49.434378] ata_eh_link_autopsy: ENTER
[ 49.438163] ata_eh_recover: ENTER
[ 49.441516] __ata_port_freeze: ata3 port frozen
[ 49.758820] ahci_do_softreset: ENTER
[ 49.922059] ata_dev_classify: found ATA device by sig
[ 49.927144] ahci_do_softreset: EXIT, class=1
[ 49.931450] ata_std_postreset: ENTER
[ 49.935060] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 49.941272] ata_std_postreset: EXIT
[ 49.944795] ata_eh_thaw_port: ata3 port thawed
[ 49.949273] ata_eh_revalidate_and_attach: ENTER
[ 49.953861] ata_sg_setup: 1 sg elements mapped
[ 49.960662] ata_port_flush_task: ENTER
[ 49.965491] ata_port_flush_task: ENTER
[ 49.969276] ata3.00: ATA-6: WDC WD360GD-00FLA2, 31.08F31, max UDMA/133
[ 49.975833] ata3.00: 72303840 sectors, multi 16: LBA48
[ 49.981088] ata_dev_set_xfermode: set features - xfer mode
[ 49.987646] ata_port_flush_task: ENTER
[ 49.991430] ata_dev_set_xfermode: EXIT, err_mask=0
[ 49.996278] ata_sg_setup: 1 sg elements mapped
[ 50.003075] ata_port_flush_task: ENTER
[ 50.007870] ata_port_flush_task: ENTER
[ 50.011657] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 50.017259] ata3.00: configured for UDMA/133
[ 50.021564] ata_eh_recover: EXIT, rc=0
[ 50.025349] ata_scsi_error: EXIT
[ 50.028613] ata_port_schedule_eh: port EH scheduled
[ 50.029498] ata_scsi_error: ENTER
[ 50.029499] ata_port_flush_task: ENTER
[ 50.040660] ata_eh_link_autopsy: ENTER
[ 50.044448] ata_eh_recover: ENTER
[ 50.047799] __ata_port_freeze: ata4 port frozen
[ 50.365172] ahci_do_softreset: ENTER
[ 50.528411] ata_dev_classify: found ATAPI device by sig
[ 50.533670] ahci_do_softreset: EXIT, class=3
[ 50.537976] ata_std_postreset: ENTER
[ 50.541588] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 50.547800] ata_std_postreset: EXIT
[ 50.551333] ata_eh_thaw_port: ata4 port thawed
[ 50.555809] ata_eh_revalidate_and_attach: ENTER
[ 50.711667] ata_sg_setup: 1 sg elements mapped
[ 50.716623] ata_port_flush_task: ENTER
[ 50.720423] ata4.00: ATAPI: Optiarc DVD RW AD-7170S, 1.00, max UDMA/66
[ 50.726983] ata_dev_set_xfermode: set features - xfer mode
[ 50.732645] ata_port_flush_task: ENTER
[ 50.736430] ata_dev_set_xfermode: EXIT, err_mask=0
[ 50.891575] ata_sg_setup: 1 sg elements mapped
[ 50.896532] ata_port_flush_task: ENTER
[ 50.900325] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x44
[ 50.905928] ata4.00: configured for UDMA/66
[ 50.910146] ata_eh_recover: EXIT, rc=0
[ 50.913931] ata_scsi_error: EXIT
[ 50.924880] ata_host_register: host probe begin
[ 50.929464] ata_scsi_dump_cdb: CDB (1:0,0,0) 12 00 00 00 24 00 00 00 00
[ 50.936130] ata_scsi_dump_cdb: CDB (1:0,0,0) 12 00 00 00 60 00 00 00 00
[ 50.942788] scsi 1:0:0:0: Direct-Access ATA ST3250823AS 3.03 PQ: 0 ANSI: 5
[ 50.950993] ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 00
[ 50.957784] ata_scsi_dump_cdb: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00
[ 50.964435] sd 1:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
[ 50.971605] ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 3f 00 00 00 00 00 08
[ 50.978256] sd 1:0:0:0: [sdc] Write Protect is off
[ 50.983088] ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 08 00 00 00 00 00 08
[ 50.989743] ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 08 00 00 00 00 00 24
[ 50.996395] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 51.005495] ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 24
[ 51.012196] ata_scsi_dump_cdb: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00
[ 51.018847] sd 1:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
[ 51.026016] ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 3f 00 00 00 00 00 08
[ 51.032669] sd 1:0:0:0: [sdc] Write Protect is off
[ 51.037502] ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 08 00 00 00 00 00 08
[ 51.044155] ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 08 00 00 00 00 00 24
[ 51.050806] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 51.059894] sdc:<3>ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 00 00 00 00 00 00 08
[ 51.067292] ata_sg_setup: 1 sg elements mapped
[ 51.089928] sdc1 sdc2
[ 51.092504] sd 1:0:0:0: [sdc] Attached SCSI disk
[ 51.097208] sd 1:0:0:0: Attached scsi generic sg2 type 0
[ 51.102573] ata_scsi_dump_cdb: CDB (2:0,0,0) 12 00 00 00 24 00 00 00 00
[ 51.109231] ata_scsi_dump_cdb: CDB (2:0,0,0) 12 00 00 00 60 00 00 00 00
[ 51.115889] scsi 2:0:0:0: Direct-Access ATA Config Disk RGL1 PQ: 0 ANSI: 5
[ 51.124126] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 51.130784] ata_scsi_timed_out: ENTER
[ 51.134485] ata_scsi_timed_out: EXIT, ret=0
[ 51.138706] ata_scsi_error: ENTER
[ 51.142058] ata_port_flush_task: ENTER
[ 51.145849] ata_eh_link_autopsy: ENTER
[ 51.149639] ata_eh_link_autopsy: EXIT
[ 51.158588] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 51.165065] ata2.00: irq_stat 0x40000001
[ 51.169023] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 51.169024] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 51.184496] ata2.00: status: {DRDY ERR }
[ 51.188458] ata2.00: error: {ABRT }
[ 51.191982] ata_eh_recover: ENTER
[ 51.195335] ata_eh_revalidate_and_attach: ENTER
[ 51.199923] ata_sg_setup: 1 sg elements mapped
[ 51.204434] ata_port_flush_task: ENTER
[ 51.208234] ata_dev_set_xfermode: set features - xfer mode
[ 51.213770] ata_port_flush_task: ENTER
[ 51.217555] ata_dev_set_xfermode: EXIT, err_mask=0
[ 51.222400] ata_sg_setup: 1 sg elements mapped
[ 51.226910] ata_port_flush_task: ENTER
[ 51.230699] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 51.236306] ata2.00: configured for UDMA/133
[ 51.240611] ata_eh_recover: EXIT, rc=0
[ 51.244397] ata2: EH complete
[ 51.247401] ata_scsi_error: EXIT
[ 51.250666] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 51.257319] ata_scsi_timed_out: ENTER
[ 51.261017] ata_scsi_timed_out: EXIT, ret=0
[ 51.265238] ata_scsi_error: ENTER
[ 51.268586] ata_port_flush_task: ENTER
[ 51.272374] ata_eh_link_autopsy: ENTER
[ 51.276156] ata_eh_link_autopsy: EXIT
[ 51.279857] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 51.286329] ata2.00: irq_stat 0x40000001
[ 51.290286] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 51.290287] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 51.305758] ata2.00: status: {DRDY ERR }
[ 51.309721] ata2.00: error: {ABRT }
[ 51.313245] ata_eh_recover: ENTER
[ 51.316597] ata_eh_revalidate_and_attach: ENTER
[ 51.321185] ata_sg_setup: 1 sg elements mapped
[ 51.325695] ata_port_flush_task: ENTER
[ 51.329488] ata_dev_set_xfermode: set features - xfer mode
[ 51.335023] ata_port_flush_task: ENTER
[ 51.338808] ata_dev_set_xfermode: EXIT, err_mask=0
[ 51.343653] ata_sg_setup: 1 sg elements mapped
[ 51.348163] ata_port_flush_task: ENTER
[ 51.351955] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 51.357563] ata2.00: configured for UDMA/133
[ 51.361872] ata_eh_recover: EXIT, rc=0
[ 51.365657] ata2: EH complete
[ 51.368659] ata_scsi_error: EXIT
[ 51.371929] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 51.378581] ata_scsi_timed_out: ENTER
[ 51.382279] ata_scsi_timed_out: EXIT, ret=0
[ 51.386500] ata_scsi_error: ENTER
[ 51.389848] ata_port_flush_task: ENTER
[ 51.393636] ata_eh_link_autopsy: ENTER
[ 51.397419] ata_eh_link_autopsy: EXIT
[ 51.401118] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 51.407590] ata2.00: irq_stat 0x40000001
[ 51.411547] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 51.411548] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 51.427020] ata2.00: status: {DRDY ERR }
[ 51.430982] ata2.00: error: {ABRT }
[ 51.434508] ata_eh_recover: ENTER
[ 51.437858] ata_eh_revalidate_and_attach: ENTER
[ 51.442448] ata_sg_setup: 1 sg elements mapped
[ 51.446959] ata_port_flush_task: ENTER
[ 51.450758] ata_dev_set_xfermode: set features - xfer mode
[ 51.456294] ata_port_flush_task: ENTER
[ 51.460079] ata_dev_set_xfermode: EXIT, err_mask=0
[ 51.464924] ata_sg_setup: 1 sg elements mapped
[ 51.469434] ata_port_flush_task: ENTER
[ 51.473225] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 51.478832] ata2.00: configured for UDMA/133
[ 51.483134] ata_eh_recover: EXIT, rc=0
[ 51.486921] ata2: EH complete
[ 51.489924] ata_scsi_error: EXIT
[ 51.493190] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 51.499842] ata_scsi_timed_out: ENTER
[ 51.503540] ata_scsi_timed_out: EXIT, ret=0
[ 51.507761] ata_scsi_error: ENTER
[ 51.511111] ata_port_flush_task: ENTER
[ 51.514899] ata_eh_link_autopsy: ENTER
[ 51.518683] ata_eh_link_autopsy: EXIT
[ 51.522380] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 51.528853] ata2.00: irq_stat 0x40000001
[ 51.532810] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 51.532811] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 51.548282] ata2.00: status: {DRDY ERR }
[ 51.552245] ata2.00: error: {ABRT }
[ 51.555769] ata_eh_recover: ENTER
[ 51.559122] ata_eh_revalidate_and_attach: ENTER
[ 51.563710] ata_sg_setup: 1 sg elements mapped
[ 51.568220] ata_port_flush_task: ENTER
[ 51.572020] ata_dev_set_xfermode: set features - xfer mode
[ 51.577555] ata_port_flush_task: ENTER
[ 51.581340] ata_dev_set_xfermode: EXIT, err_mask=0
[ 51.586186] ata_sg_setup: 1 sg elements mapped
[ 51.590700] ata_port_flush_task: ENTER
[ 51.594496] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 51.600102] ata2.00: configured for UDMA/133
[ 51.604405] ata_eh_recover: EXIT, rc=0
[ 51.608190] ata2: EH complete
[ 51.611194] ata_scsi_error: EXIT
[ 51.614461] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 51.621114] ata_scsi_timed_out: ENTER
[ 51.624810] ata_scsi_timed_out: EXIT, ret=0
[ 51.629033] ata_scsi_error: ENTER
[ 51.632389] ata_port_flush_task: ENTER
[ 51.636178] ata_eh_link_autopsy: ENTER
[ 51.639960] ata_eh_link_autopsy: EXIT
[ 51.643658] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 51.650132] ata2.00: irq_stat 0x40000001
[ 51.654090] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 51.654090] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 51.669572] ata2.00: status: {DRDY ERR }
[ 51.673531] ata2.00: error: {ABRT }
[ 51.677058] ata_eh_recover: ENTER
[ 51.680408] ata_eh_revalidate_and_attach: ENTER
[ 51.684998] ata_sg_setup: 1 sg elements mapped
[ 51.689509] ata_port_flush_task: ENTER
[ 51.693308] ata_dev_set_xfermode: set features - xfer mode
[ 51.698843] ata_port_flush_task: ENTER
[ 51.702628] ata_dev_set_xfermode: EXIT, err_mask=0
[ 51.707474] ata_sg_setup: 1 sg elements mapped
[ 51.711983] ata_port_flush_task: ENTER
[ 51.715775] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 51.721381] ata2.00: configured for UDMA/133
[ 51.725684] ata_eh_recover: EXIT, rc=0
[ 51.729469] ata2: EH complete
[ 51.732475] ata_scsi_error: EXIT
[ 51.735740] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 51.742394] ata_scsi_timed_out: ENTER
[ 51.746091] ata_scsi_timed_out: EXIT, ret=0
[ 51.750312] ata_scsi_error: ENTER
[ 51.753660] ata_port_flush_task: ENTER
[ 51.757450] ata_eh_link_autopsy: ENTER
[ 51.761239] ata_eh_link_autopsy: EXIT
[ 51.764937] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 51.771411] ata2.00: irq_stat 0x40000001
[ 51.775368] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 51.775369] res 51/04:00:01:01:80/00:00:00:00:00/a0 error: {ABRT }
[ 51.798329] ata_eh_recover: ENTER
[ 51.801679] ata_eh_revalidate_and_attach: ENTER
[ 51.806269] ata_s_xfermode: set features - xfer mode
[ 51.820114] ata_port_flush_task: ENTER
[ 51.823898] ata_dev_set_xfermode: EXIT, err_
[ 51.846963] ata_eh_recover: EXIT, rc=0
[ 51.850749] ata2: EH complete
[ 51.853753] ata_scsi_error: EXIT
[ 51.8570NTER
[ 51.867370] ata_scsi_timed_out: EXIT, ret=0
[ 51.871591] ata_scsi_error: ENTER
[ 51.874940] ata_port_flush_task: ENTER
[ 51.878727] ata_eh_link_autopsy: ENTER
[ 51.882509] ata_eh_link_autopsy: EXIT
[ 51.886209] ata2.00: exception 1/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 51.917364] ata2.00: status: {DRDY ERR }
[ 51.921322] ata2.0recover: ENTER
[ 51.928199] ata_eh_revalidate_and_attach: ENTER
[ 51.932789] ata_sg_setup: 1 sg elements mapped
[ 51.9 51.946633] ata_port_flush_task: ENTER
[ 51.950418] ata_dev_set_xfermode: EXIT, err_mask=0
[ 51.955266] ata_sg_setup: 1 _shift=12, xfer_mode=0x46
[ 51.969181] ata2.00: configured for UDMA/133
[ 51.973483] ata_eh_recover: EXIT, rc=0
[ 51.9 (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 51.990193] ata_scsi_timed_out: ENTER
[ 51.993889] ata_scsi_timed_out: EXIT, ret=0a_eh_link_autopsy: ENTER
[ 52.009030] ata_eh_link_autopsy: EXIT
[ 52.012728] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0k 0x1 (device error)
[ 52.038640] ata2.00: status: {DRDY ERR }
[ 52.042603] ata2.00: error: {ABRT }
[ 52.046126] ata_e sg elements mapped
[ 52.058580] ata_port_flush_task: ENTER
[ 52.062376] ata_dev_set_xfermode: set features - xfer mode
52.076544] ata_sg_setup: 1 sg elements mapped
[ 52.081054] ata_port_flush_task: ENTER
[ 52.084852] ata_dev_set_mode: xfrecover: EXIT, rc=0
[ 52.098549] ata2: EH complete
[ 52.101550] ata_scsi_error: EXIT
[ 52.104820] ata_scsi_dump_cdb: Ca_scsi_timed_out: EXIT, ret=0
[ 52.119389] ata_scsi_error: ENTER
[ 52.122737] ata_port_flush_task: ENTER
[ 52.126527] on Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 52.140479] ata2.00: irq_stat 0x40000001
[ 52.144440] ata2.00: cmd e5/00:00:00{ABRT }
[ 52.167405] ata_eh_recover: ENTER
[ 52.170758] ata_eh_revalidate_and_attach: ENTER
[ 52.175346] ata_sg_setup:e: set features - xfer mode
[ 52.189183] ata_port_flush_task: ENTER
[ 52.192968] ata_dev_set_xfermode: EXIT, err_mask=0
216034] ata_eh_recover: EXIT, rc=0
[ 52.219819] ata2: EH complete
[ 52.222823] ata_scsi_error: EXIT
[ 52.226090] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 52.232743] ata_scsi_timed_out: ENTER
[ 52.236438] ata_scsi_timedata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 52.261752] ata2.00: irq_stat 0x40000001
[ 52.265709] ata2.00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 52.281190] ata2.00: status: {DRDY ERR }
[ 52.285152] ata2.00: error[ 52.296617] ata_sg_setup: 1 sg elements mapped
[ 52.301129] ata_port_flush_task: ENTER
[ 52.304926] ata_dev_set_xfermoxfermode: EXIT, err_mask=0
[ 52.319093] ata_sg_setup: 1 sg elements mapped
[ 52.323604] ata_port_flush_task: ENTER
[ 5or: EXIT
[ 52.347360] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 52.354013] ata_scsi_timed_out: ENTER
[ 52.357710] ata_scsi_timed_out: EXIT, ret=0
[ 52.361930] ata_scsi_error: ENTER
[ 52.365280] ata_port_flush_task: ENTE001
[ 52.386988] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 52.386989] res 51/04:0[ 52.406434] ata2.00: error: {ABRT }
[ 52.409955] ata_eh_recover: ENTER
[ 52.413308] ata_eh_revalidate_and_attach: ENTE 52.426207] ata_dev_set_xfermode: set features - xfer mode
[ 52.431743] ata_port_flush_task: ENTER
[ 52.435526] ata_dev_s_port_flush_task: ENTER
[ 52.448682] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 52.454289] ata2.00: configured for1] ata_scsi_error: EXIT
[ 52.468649] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 52.475304] ata_scsi_ti_autopsy: EXIT
[ 52.497855] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 52.504327] ata2.00: irq_stat 0x40000001
[ 52.508284] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 52.508285] res 51/0h_revalidate_and_attach: ENTER
[ 52.539185] ata_sg_setup: 1 sg elements mapped
[ 52.543696] ata_port_flush_task: ENTER
[ER
[ 52.556815] ata_dev_set_xfermode: EXIT, err_mask=0
[ 52.561661] ata_sg_setup: 1 sg elements mapped
[ 52.566170] at
[ 52.586659] ata_scsi_error: EXIT
[ 52.589928] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 52.59658417] ata_eh_link_autopsy: EXIT
[ 52.619115] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 52.625590] ata2.00: irq_stat 0x40000001
[ 52.629547] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 52.629548] .655866] ata_eh_revalidate_and_attach: ENTER
[ 52.660455] ata_sg_setup: 1 sg elements mapped
[ 52.664964] ata_port_flush_task: ENTER
[ 52.674003] ata_dev_set_xfermode: set features - xfer mode
[ 52.679540] ata_port_flush_task: ENTER
[ 52.6
[ 52.696480] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 52.702086] ata2.00: configured for UDMA/133
[ 52.706391
[ 52.716448] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 52.723098] ata_scsi_timed_out: ENTER
[ 52.7t_flush_task: ENTER
[ 52.738156] ata_eh_link_autopsy: ENTER
[ 52.741945] ata_eh_link_autopsy: EXIT
[ 52.745643] ata2.0 52.756083] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 52.756084] res 51/04:00:01:015518] ata2.00: error: {ABRT }
[ 52.779042] ata_eh_recover: ENTER
[ 52.782395] ata_eh_revalidate_and_attach: ENTER
[ 52dev_set_xfermode: EXIT, err_mask=0
[ 52.809451] ata_sg_setup: 1 sg elements mapped
[ 52.813962] ata_port_flush_task: ENTEd for UDMA/133
[ 52.827670] ata_eh_recover: EXIT, rc=0
[ 52.831455] ata2: EH complete
[ 52.834458] ata_scsi_error: EXIsi_timed_out: ENTER
[ 52.848075] ata_scsi_timed_out: EXIT, ret=0
[ 52.852297] ata_scsi_error: ENTER
[ 52.855646] ata_p EXIT
[ 52.866925] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 52.873399] ata2.00: irq_stat 0x40000001
[ res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 52.892845] ata2.00: status: {DRDY ERR }
[ 52ate_and_attach: ENTER
[ 52.908272] ata_sg_setup: 1 sg elements mapped
[ 52.912782] ata_port_flush_task: ENTER
[ 52.916265] ata_port_flush_task: ENTER
[ 52.939057] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 52.944663] ata2.00: configured for UDMA/133
[ 52.948965] ata_eh_recover: EXIT, rc=0
[ 52.952751] ata2: EH complete
[ 52.955755] ata_scsi_error: ENTER
[ 52.976943] ata_port_flush_task: ENTER
[ 52.980730] ata_eh_link_autopsy: ENTER
[ 52.984512] ata_eh_link_autopsa2.00: irq_stat 0x40000001
[ 52.998642] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 52.99864 status: {DRDY ERR }
[ 53.018086] ata2.00: error: {ABRT }
[ 53.021610] ata_eh_recover: ENTER
[ 53.024963] ata_eh_revalflush_task: ENTER
[ 53.037852] ata_dev_set_xfermode: set features - xfer mode
[ 53.043387] ata_port_flush_task: ENTER
[ ed
[ 53.056530] ata_port_flush_task: ENTER
[ 53.060326] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 53.065932] a0 00 00
[ 53.086945] ata_scsi_timed_out: ENTER
[ 53.090641] ata_scsi_timed_out: EXIT, ret=0
[ 53.094864] ata_scsi_erro53.105784] ata_eh_link_autopsy: EXIT
[ 53.109482] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 53.115955] db 0x0 data 0
[ 53.119913] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 53.135385] ata2.00: status: {DRDY ERR }
[ 53.139347] ata2.00: error: {ABRT }
[ 53.142871] ata_eh_recover: ENTER
[ 53.146223] ata_eh_revta_port_flush_task: ENTER
[ 53.168433] ata_dev_set_xfermode: EXIT, err_mask=0
[ 53.173281] ata_sg_setup: 1 sg elements mapped
[ 53.177791] ata_port_flush_task: ENTER
[ 53.181590] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 53.187199]5293] ata2: EH complete
[ 53.198297] ata_scsi_error: EXIT
[ 53.201565] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00psy: ENTER
[ 53.227054] ata_eh_link_autopsy: EXIT
[ 53.230752] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x00:00/a0 tag 0 cdb 0x0 data 0
[ 53.241193] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 53_recover: ENTER
[ 53.267503] ata_eh_revalidate_and_attach: ENTER
[ 53.272091] ata_sg_setup: 1 sg elements mapped
[ 53.[ 53.285929] ata_port_flush_task: ENTER
[ 53.289712] ata_dev_set_xfermode: EXIT, err_mask=0
[ 53.294560] ata_sg_setup: r_shift=12, xfer_mode=0x46
[ 53.308475] ata2.00: configured for UDMA/133
[ 53.312777] ata_eh_recover: EXIT, rc=0
[ 53.IT
[ 53.326350] ata_scsi_dump_cdb: CDB (2:0,0,0) 1b 01 00 00 01 00 00 00 00
[ 53.333004] ata_scsi_timed_out: ENTER
[ 5port_flush_task: ENTER
[ 53.348059] ata_eh_link_autopsy: ENTER
[ 53.351842] ata_eh_link_autopsy: EXIT
[ 53.355540] ata 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 53.381460] ata2.00: status: {DRDY ERR }
[ 53.385422] ata2h: ENTER
[ 53.396889] ata_sg_setup: 1 sg elements mapped
[ 53.401399] ata_port_flush_task: ENTER
[ 53.405196] ata_dev__flush_task: ENTER
[ 53.427673] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 53.438570] ata2.00: configured for UDMA, rc=0
[ 53.446660] ata2: EH complete
[ 53.449664] ata_scsi_error: EXIT
[ 53.452931] ata_scsi_dump_cdb: CDB (2:0,0,0) ata_eh_link_autopsy: ENTER
[ 53.478431] ata_eh_link_autopsy: EXIT
[ 53.482129] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 53.488601] ata2.00: irq_stat 0x40000001
[ 53.492559] ata2.00: cmd 40/00:01:00:00:00/00:00:00:00:00/e0 53.515519] ata_eh_recover: ENTER
[ 53.518871] ata_eh_revalidate_and_attach: ENTER
[ 53.523460] ata_sg_setup: 1 sg elementes - xfer mode
[ 53.537314] ata_port_flush_task: ENTER
[ 53.541099] ata_dev_set_xfermode: EXIT, err_mask=0
[ 53.545945_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 53.559859] ata2.00: configured for UDMA/133
[ 53.564163] ata_eh_recover: Escsi_dump_cdb: CDB (2:0,0,0) 1b 01 00 00 01 00 00 00 00
[ 53.580873] ata_scsi_timed_out: ENTER
[ 53.584566] ata_scsi_time
[ 53.595927] ata_eh_link_autopsy: ENTER
[ 53.599709] ata_eh_link_autopsy: EXIT
[ 53.603409] ata2.00: exception Emask 00:00:00:00/a0 Emask 0x1 (device error)
[ 53.629311] ata2.00: status: {DRDY ERR }
[ 53.633274] ata2.00: error: {ABRT }
[ 53.636798] ata_eh_recover: ENTER
[ 53.640151] ata_eh_revalidate_and_attach: ENTER
[ 53.644739] ata_sg_setup: 1 sg eleme[ 54.165122] __ata_port_freeze: ata2 port frozen
[ 54.169686] ata_port_flush_task: ENTER
[ 54.173477] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x40)
[ 54.179691] ata2.00: revalidation failed (errno=-5)
[ 54.184601] ata_eh_revalidate_and_attach: EXIT rc=-5
[ 54.189598] ata2: failed to recover some devices, retrying in 5 secs
[ 59.193927] __ata_port_freeze: ata2 port frozen
[ 61.399434] ata2: soft resetting link
[ 61.403135] ahci_do_softreset: ENTER
[ 61.406746] ahci_do_softreset: PHY reports no device
[ 61.411746] ata_std_postreset: ENTER
[ 61.415358] ata2: SATA link down (SStatus 21 SControl 300)
[ 61.420876] ata_std_postreset: EXIT
[ 61.424401] ata_eh_thaw_port: ata2 port thawed
[ 61.428879] ata_eh_revalidate_and_attach: ENTER
[ 61.433442] ata_eh_revalidate_and_attach: EXIT rc=-5
[ 61.438442] ata2: limiting SATA link speed to 1.5 Gbps
[ 61.443613] ata2.00: limiting speed to UDMA/133:PIO3
[ 61.448610] ata2: failed to recover some devices, retrying in 5 secs
[ 62.235364] ata_port_schedule_eh: port EH scheduled
[ 62.240275] __ata_port_freeze: ata2 port frozen
[ 66.453467] __ata_port_freeze: ata2 port frozen
[ 66.458039] ata2: hard resetting link
[ 66.461734] ahci_hardreset: ENTER
[ 66.465088] sata_std_hardreset: ENTER
[ 66.468785] sata_link_hardreset: ENTER
[ 66.789964] sata_link_hardreset: EXIT, rc=0
[ 67.159769] ata_dev_classify: found ATA device by sig
[ 67.164857] sata_std_hardreset: EXIT, class=1
[ 67.169248] ata_dev_classify: found ATA device by sig
[ 67.174332] ahci_hardreset: EXIT, rc=0, class=1
[ 67.178898] ata_std_postreset: ENTER
[ 67.182510] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 67.188722] ata_std_postreset: EXIT
[ 67.192254] ata_eh_thaw_port: ata2 port thawed
[ 67.196732] ata_eh_revalidate_and_attach: ENTER
[ 67.201317] ata_sg_setup: 1 sg elements mapped
[ 67.205832] ata_port_flush_task: ENTER
[ 67.209627] ata_dev_set_xfermode: set features - xfer mode
[ 67.215163] ata_port_flush_task: ENTER
[ 67.218947] ata_dev_set_xfermode: EXIT, err_mask=0
[ 67.223795] ata_sg_setup: 1 sg elements mapped
[ 67.228307] ata_port_flush_task: ENTER
[ 67.232103] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 67.237710] ata2.00: configured for UDMA/133
[ 67.242012] ata_eh_recover: EXIT, rc=0
[ 67.245799] ata_eh_link_autopsy: ENTER
[ 67.249584] ata_eh_link_autopsy: EXIT
[ 67.253282] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0x3 t4
[ 67.260361] ata2: irq_stat 0x00000040, connection status changed
[ 67.266397] ata2: SError: {PHYRdyChg DevExch }
[ 67.270873] ata_eh_recover: ENTER
[ 67.274224] __ata_port_freeze: ata2 port frozen
[ 67.989339] ata2: soft resetting link
[ 67.993040] ahci_do_softreset: ENTER
[ 68.155912] ata_dev_classify: unknown device
[ 68.160218] ahci_do_softreset: EXIT, class=0
[ 68.164523] ata_std_postreset: ENTER
[ 68.168136] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 68.174348] ata_std_postreset: EXIT
[ 68.177871] ata_eh_thaw_port: ata2 port thawed
[ 68.182349] ata_eh_revalidate_and_attach: ENTER
[ 68.186935] ata_sg_setup: 1 sg elements mapped
[ 98.173658] ata_port_flush_task: ENTER
[ 98.177448] __ata_port_freeze: ata2 port frozen
[ 98.182009] ata2.00: qc timeout (cmd 0xec)
[ 98.186145] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[ 98.192277] ata2.00: revalidation failed (errno=-5)
[ 98.197194] ata_eh_revalidate_and_attach: EXIT rc=-5
[ 98.202194] ata2: failed to recover some devices, retrying in 5 secs
[ 103.207688] __ata_port_freeze: ata2 port frozen
[ 103.212254] ata2: hard resetting link
[ 103.215949] ahci_hardreset: ENTER
[ 103.219303] sata_std_hardreset: ENTER
[ 103.223000] sata_link_hardreset: ENTER
[ 103.544187] sata_link_hardreset: EXIT, rc=0
[ 108.711513] ata2: port is slow to respond, please be patient (Status 0x80)
[ 113.249138] ata2: COMRESET failed (errno=-16)
[ 113.253536] ahci_hardreset: EXIT, rc=-16, class=5
[ 113.258273] ata2: hard resetting link
[ 113.261970] ahci_hardreset: ENTER
[ 113.265321] sata_std_hardreset: ENTER
[ 113.269018] sata_link_hardreset: ENTER
[ 113.592295] sata_link_hardreset: EXIT, rc=0
[ 113.962100] ata_dev_classify: found ATA device by sig
[ 113.967187] sata_std_hardreset: EXIT, class=1
[ 113.971579] ata_dev_classify: found ATA device by sig
[ 113.976662] ahci_hardreset: EXIT, rc=0, class=1
[ 113.981228] ata_std_postreset: ENTER
[ 113.984840] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 113.991052] ata_std_postreset: EXIT
[ 113.994582] ata_eh_thaw_port: ata2 port thawed
[ 113.999060] ata_eh_revalidate_and_attach: ENTER
[ 114.003648] ata_sg_setup: 1 sg elements mapped
[ 114.008160] ata_port_flush_task: ENTER
[ 114.011958] ata_dev_set_xfermode: set features - xfer mode
[ 114.017492] ata_port_flush_task: ENTER
[ 114.021278] ata_dev_set_xfermode: EXIT, err_mask=0
[ 114.026126] ata_sg_setup: 1 sg elements mapped
[ 114.030639] ata_port_flush_task: ENTER
[ 114.034434] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 114.040041] ata2.00: configured for UDMA/133
[ 114.044343] ata_eh_recover: EXIT, rc=0
[ 114.048129] ata_eh_link_autopsy: ENTER
[ 114.051914] ata_eh_link_autopsy: EXIT
[ 114.055611] ata_eh_recover: ENTER
[ 114.058963] ata_eh_revalidate_and_attach: ENTER
[ 114.063529] ata_eh_recover: EXIT, rc=0
[ 114.067314] ata2: EH complete
[ 114.070318] ata_scsi_error: EXIT
[ 114.073586] ata_scsi_dump_cdb: CDB (2:0,0,0) 1b 01 00 00 01 00 00 00 00
[ 114.080240] ata_scsi_timed_out: ENTER
[ 114.083941] ata_scsi_timed_out: EXIT, ret=0
[ 114.088162] ata_scsi_error: ENTER
[ 114.091513] ata_port_flush_task: ENTER
[ 114.095302] ata_eh_link_autopsy: ENTER
[ 114.099085] ata_eh_link_autopsy: EXIT
[ 114.102783] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 114.109255] ata2.00: irq_stat 0x40000001
[ 114.113213] ata2.00: cmd 40/00:01:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 0
[ 114.113214] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 114.128686] ata2.00: status: {DRDY ERR }
[ 114.132648] ata2.00: error: {ABRT }
[ 114.136172] ata_eh_recover: ENTER
[ 114.139525] ata_eh_revalidate_and_attach: ENTER
[ 114.144114] ata_sg_setup: 1 sg elements mapped
[ 114.148627] ata_port_flush_task: ENTER
[ 114.157668] ata_dev_set_xfermode: set features - xfer mode
[ 114.163207] ata_port_flush_task: ENTER
[ 114.166991] ata_dev_set_xfermode: EXIT, err_mask=0
[ 114.171839] ata_sg_setup: 1 sg elements mapped
[ 114.176353] ata_port_flush_task: ENTER
[ 114.180148] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 114.185754] ata2.00: configured for UDMA/133
[ 114.190057] ata_eh_recover: EXIT, rc=0
[ 114.193842] ata2: EH complete
[ 114.196846] ata_scsi_error: EXIT
[ 114.200114] ata_scsi_dump_cdb: CDB (2:0,0,0) 1b 01 00 00 01 00 00 00 00
[ 114.206768] ata_scsi_timed_out: ENTER
[ 114.210469] ata_scsi_timed_out: EXIT, ret=0
[ 114.214690] ata_scsi_error: ENTER
[ 114.218041] ata_port_flush_task: ENTER
[ 114.221830] ata_eh_link_autopsy: ENTER
[ 114.225613] ata_eh_link_autopsy: EXIT
[ 114.229311] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 114.235783] ata2.00: irq_stat 0x40000001
[ 114.239741] ata2.00: cmd 40/00:01:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 0
[ 114.239742] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 114.255213] ata2.00: status: {DRDY ERR }
[ 114.259176] ata2.00: error: {ABRT }
[ 114.262700] ata_eh_recover: ENTER
[ 114.266052] ata_eh_revalidate_and_attach: ENTER
[ 114.270641] ata_sg_setup: 1 sg elements mapped
[ 114.275154] ata_port_flush_task: ENTER
[ 114.278951] ata_dev_set_xfermode: set features - xfer mode
[ 114.284487] ata_port_flush_task: ENTER
[ 114.288271] ata_dev_set_xfermode: EXIT, err_mask=0
[ 114.293119] ata_sg_setup: 1 sg elements mapped
[ 114.297631] ata_port_flush_task: ENTER
[ 114.301427] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 114.307033] ata2.00: configured for UDMA/133
[ 114.311336] ata_eh_recover: EXIT, rc=0
[ 114.315121] ata2: EH complete
[ 114.318125] ata_scsi_error: EXIT
[ 114.321392] ata_scsi_dump_cdb: CDB (2:0,0,0) 1b 01 00 00 01 00 00 00 00
[ 114.328046] ata_scsi_timed_out: ENTER
[ 114.331740] ata_scsi_timed_out: EXIT, ret=0
[ 114.335966] ata_scsi_error: ENTER
[ 114.339322] ata_port_flush_task: ENTER
[ 114.343109] ata_eh_link_autopsy: ENTER
[ 114.346891] ata_eh_link_autopsy: EXIT
[ 114.350589] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 114.357064] ata2.00: irq_stat 0x40000001
[ 114.361028] ata2.00: cmd 40/00:01:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 0
[ 114.361029] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 114.376501] ata2.00: status: {DRDY ERR }
[ 114.380464] ata2.00: error: {ABRT }
[ 114.383988] ata_eh_recover: ENTER
[ 114.387340] ata_eh_revalidate_and_attach: ENTER
[ 114.391931] ata_sg_setup: 1 sg elements mapped
[ 114.396443] ata_port_flush_task: ENTER
[ 114.400238] ata_dev_set_xfermode: set features - xfer mode
[ 114.405775] ata_port_flush_task: ENTER
[ 114.409560] ata_dev_set_xfermode: EXIT, err_mask=0
[ 114.414405] ata_sg_setup: 1 sg elements mapped
[ 114.418920] ata_port_flush_task: ENTER
[ 114.422714] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 114.428320] ata2.00: configured for UDMA/133
[ 114.432623] ata_eh_recover: EXIT, rc=0
[ 114.436412] ata2: EH complete
[ 114.439413] ata_scsi_error: EXIT
[ 115.437997] .<3>ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 115.445060] ata_scsi_timed_out: ENTER
[ 115.448757] ata_scsi_timed_out: EXIT, ret=0
[ 115.452976] ata_scsi_error: ENTER
[ 115.456327] ata_port_flush_task: ENTER
[ 115.460115] ata_eh_link_autopsy: ENTER
[ 115.463897] ata_eh_link_autopsy: EXIT
[ 115.467595] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 115.474067] ata2.00: irq_stat 0x40000001
[ 115.478025] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 115.478026] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 115.493499] ata2.00: status: {DRDY ERR }
[ 115.497459] ata2.00: error: {ABRT }
[ 115.500986] ata_eh_recover: ENTER
[ 115.504336] ata_eh_revalidate_and_attach: ENTER
[ 115.508926] ata_sg_setup: 1 sg elements mapped
[ 115.513438] ata_port_flush_task: ENTER
[ 115.517237] ata_dev_set_xfermode: set features - xfer mode
[ 115.522772] ata_port_flush_task: ENTER
[ 115.526554] ata_dev_set_xfermode: EXIT, err_mask=0
[ 115.531402] ata_sg_setup: 1 sg elements mapped
[ 115.535915] ata_port_flush_task: ENTER
[ 115.539711] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 115.545317] ata2.00: configured for UDMA/133
[ 115.549620] ata_eh_recover: EXIT, rc=0
[ 115.553406] ata2: EH complete
[ 115.556409] ata_scsi_error: EXIT
[ 115.559677] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 115.566340] ata_scsi_timed_out: ENTER
[ 115.570032] ata_scsi_timed_out: EXIT, ret=0
[ 115.574254] ata_scsi_error: ENTER
[ 115.577604] ata_port_flush_task: ENTER
[ 115.581394] ata_eh_link_autopsy: ENTER
[ 115.585186] ata_eh_link_autopsy: EXIT
[ 115.588884] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 115.595357] ata2.00: irq_stat 0x40000001
[ 115.599322] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 115.599323] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 115.614795] ata2.00: status: {DRDY ERR }
[ 115.618757] ata2.00: error: {ABRT }
[ 115.622281] ata_eh_recover: ENTER
[ 115.625634] ata_eh_revalidate_and_attach: ENTER
[ 115.630222] ata_sg_setup: 1 sg elements mapped
[ 115.634735] ata_port_flush_task: ENTER
[ 115.638532] ata_dev_set_xfermode: set features - xfer mode
[ 115.644067] ata_port_flush_task: ENTER
[ 115.647853] ata_dev_set_xfermode: EXIT, err_mask=0
[ 115.652699] ata_sg_setup: 1 sg elements mapped
[ 115.657211] ata_port_flush_task: ENTER
[ 115.661007] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 115.666614] ata2.00: configured for UDMA/133
[ 115.670917] ata_eh_recover: EXIT, rc=0
[ 115.674703] ata2: EH complete
[ 115.677704] ata_scsi_error: EXIT
[ 115.680975] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 115.687627] ata_scsi_timed_out: ENTER
[ 115.691320] ata_scsi_timed_out: EXIT, ret=0
[ 115.695542] ata_scsi_error: ENTER
[ 115.698892] ata_port_flush_task: ENTER
[ 115.702682] ata_eh_link_autopsy: ENTER
[ 115.706472] ata_eh_link_autopsy: EXIT
[ 115.710172] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 115.716644] ata2.00: irq_stat 0x40000001
[ 115.720601] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 115.720602] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 115.736074] ata2.00: status: {DRDY ERR }
[ 115.740037] ata2.00: error: {ABRT }
[ 115.743562] ata_eh_recover: ENTER
[ 115.746912] ata_eh_revalidate_and_attach: ENTER
[ 115.751501] ata_sg_setup: 1 sg elements mapped
[ 115.756013] ata_port_flush_task: ENTER
[ 115.759810] ata_dev_set_xfermode: set features - xfer mode
[ 115.765347] ata_port_flush_task: ENTER
[ 115.769132] ata_dev_set_xfermode: EXIT, err_mask=0
[ 115.773977] ata_sg_setup: 1 sg elements mapped
[ 115.778490] ata_port_flush_task: ENTER
[ 115.782286] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 115.787892] ata2.00: configured for UDMA/133
[ 115.792195] ata_eh_recover: EXIT, rc=0
[ 115.795982] ata2: EH complete
[ 115.798986] ata_scsi_error: EXIT
[ 115.802253] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 115.808916] ata_scsi_timed_out: ENTER
[ 115.812609] ata_scsi_timed_out: EXIT, ret=0
[ 115.816830] ata_scsi_error: ENTER
[ 115.820180] ata_port_flush_task: ENTER
[ 115.823970] ata_eh_link_autopsy: ENTER
[ 115.827759] ata_eh_link_autopsy: EXIT
[ 115.831460] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 115.837932] ata2.00: irq_stat 0x40000001
[ 115.841889] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 115.841890] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 115.857362] ata2.00: status: {DRDY ERR }
[ 115.861325] ata2.00: error: {ABRT }
[ 115.864849] ata_eh_recover: ENTER
[ 115.868201] ata_eh_revalidate_and_attach: ENTER
[ 115.872789] ata_sg_setup: 1 sg elements mapped
[ 115.877302] ata_port_flush_task: ENTER
[ 115.881099] ata_dev_set_xfermode: set features - xfer mode
[ 115.886633] ata_port_flush_task: ENTER
[ 115.890419] ata_dev_set_xfermode: EXIT, err_mask=0
[ 115.895265] ata_sg_setup: 1 sg elements mapped
[ 115.899782] ata_port_flush_task: ENTER
[ 115.903575] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 115.914433] ata2.00: configured for UDMA/133
[ 115.918741] ata_eh_recover: EXIT, rc=0
[ 115.922528] ata2: EH complete
[ 115.925532] ata_scsi_error: EXIT
[ 115.928799] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 115.935454] ata_scsi_timed_out: ENTER
[ 115.939154] ata_scsi_timed_out: EXIT, ret=0
[ 115.943375] ata_scsi_error: ENTER
[ 115.946726] ata_port_flush_task: ENTER
[ 115.950516] ata_eh_link_autopsy: ENTER
[ 115.954305] ata_eh_link_autopsy: EXIT
[ 115.958005] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 115.964478] ata2.00: irq_stat 0x40000001
[ 115.968437] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 115.968437] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 115.983925] ata2.00: status: {DRDY ERR }
[ 115.987887] ata2.00: error: {ABRT }
[ 115.991411] ata_eh_recover: ENTER
[ 115.994764] ata_eh_revalidate_and_attach: ENTER
[ 115.999352] ata_sg_setup: 1 sg elements mapped
[ 116.003864] ata_port_flush_task: ENTER
[ 116.007662] ata_dev_set_xfermode: set features - xfer mode
[ 116.013196] ata_port_flush_task: ENTER
[ 116.016982] ata_dev_set_xfermode: EXIT, err_mask=0
[ 116.021828] ata_sg_setup: 1 sg elements mapped
[ 116.026343] ata_port_flush_task: ENTER
[ 116.030136] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 116.035745] ata2.00: configured for UDMA/133
[ 116.040047] ata_eh_recover: EXIT, rc=0
[ 116.043833] ata2: EH complete
[ 116.046838] ata_scsi_error: EXIT
[ 116.050103] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 116.056765] ata_scsi_timed_out: ENTER
[ 116.060460] ata_scsi_timed_out: EXIT, ret=0
[ 116.064681] ata_scsi_error: ENTER
[ 116.068032] ata_port_flush_task: ENTER
[ 116.071823] ata_eh_link_autopsy: ENTER
[ 116.075612] ata_eh_link_autopsy: EXIT
[ 116.079310] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 116.085782] ata2.00: irq_stat 0x40000001
[ 116.089740] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 116.089741] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 116.105213] ata2.00: status: {DRDY ERR }
[ 116.109175] ata2.00: error: {ABRT }
[ 116.112699] ata_eh_recover: ENTER
[ 116.116052] ata_eh_revalidate_and_attach: ENTER
[ 116.120641] ata_sg_setup: 1 sg elements mapped
[ 116.125155] ata_port_flush_task: ENTER
[ 116.128950] ata_dev_set_xfermode: set features - xfer mode
[ 116.134485] ata_port_flush_task: ENTER
[ 116.138269] ata_dev_set_xfermode: EXIT, err_mask=0
[ 116.143117] ata_sg_setup: 1 sg elements mapped
[ 116.147631] ata_port_flush_task: ENTER
[ 116.151425] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 116.157032] ata2.00: configured for UDMA/133
[ 116.161334] ata_eh_recover: EXIT, rc=0
[ 116.165123] ata2: EH complete
[ 116.168123] ata_scsi_error: EXIT
[ 116.171391] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 116.178053] ata_scsi_timed_out: ENTER
[ 116.181748] ata_scsi_timed_out: EXIT, ret=0
[ 116.185969] ata_scsi_error: ENTER
[ 116.189319] ata_port_flush_task: ENTER
[ 116.193109] ata40000001
[ 116.211029] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 116.211029] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 116.226510] ata2.00: status: {DRDY ERR }
[ 116.230473] ata2.00
[ 116.250246] ata_dev_set_xfermode: set features - xfer mode
[ 116.255782] ata_port_flush_task: ENTER
[ 116.259566] ata_] ata_port_flush_task: ENTER
[ 116.272721] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 116.278328] ata2.00: configure299351] ata_scsi_timed_out: ENTER
[ 116.303044] ata_scsi_timed_out: EXIT, ret=0
[ 116.307265] ata_scsi_error: ENTER
[ 116.310616] ata_port_flush_task: ENTER
[ 116.314406] ata_eh_link_autopsy: ENTER
[ 116.318195] ata_eh_link_autopsy: EXIT
[ 11 116.332326] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 116.347798] ata2.00: status: {DRDY ta_eh_revalidate_and_attach: ENTER
[ 116.363226] ata_sg_setup: 1 sg elements mapped
[ 116.367739] ata_port_flush_task: ENTE: ENTER
[ 116.380854] ata_dev_set_xfermode: EXIT, err_mask=0
[ 116.385702] ata_sg_setup: 1 sg elements mapped
[ 116.3902116.399617] ata2.00: configured for UDMA/133
[ 116.403920] ata_eh_recover: EXIT, rc=0
[ 116.407705] ata2: EH complete
[ 1100 00
[ 116.420639] ata_scsi_timed_out: ENTER
[ 116.424331] ata_scsi_timed_out: EXIT, ret=0
[ 116.428553] ata_scsi_error:116.449647] ata2.00: irq_stat 0x40000001
[ 116.453612] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 085] ata2.00: status: {DRDY ERR }
[ 116.473047] ata2.00: error: {ABRT }
[ 116.476571] ata_eh_recover: ENTER
[ 116.479923]024] ata_port_flush_task: ENTER
[ 116.492821] ata_dev_set_xfermode: set features - xfer mode
[ 116.498359] ata_port_flush_telements mapped
[ 116.511503] ata_port_flush_task: ENTER
[ 116.515299] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 00 00 00 00 00 00 00
[ 116.541927] ata_scsi_timed_out: ENTER
[ 116.545620] ata_scsi_timed_out: EXIT, ret=0
[ 116.549841] ata_scsi_error: ENTER
[ 116.553193] ata_port_flush_task: ENTER
[ 116.556981] ata_eh_link_autopsy: ENTER
[ 116.560763] at:00/a0 tag 0 cdb 0x0 data 0
[ 116.574901] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 116.590373] ata2.00: status: {DRDY ERR }
[ 116.594335] ata2.00: error: {ABRT }
[ 116.597861] ata_eh_recover: ENTER
[ 116.6012 116.619647] ata_port_flush_task: ENTER
[ 116.623430] ata_dev_set_xfermode: EXIT, err_mask=0
[ 116.628278] ata_sg_setup: 1 _shift=12, xfer_mode=0x46
[ 116.642193] ata2.00: configured for UDMA/133
[ 116.646495] ata_eh_recover: EXIT, rc=0
[ 116.6[ 116.672151] ata_scsi_timed_out: EXIT, ret=0
[ 116.676370] ata_scsi_error: ENTER
[ 116.679720] ata_port_flush_task: ENTERutopsy: EXIT
[ 116.690998] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 116.697472] ata2.00: irq_stat 0x40000001
[ 116.701429] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 116.701430] res 51/04:DRDY ERR }
[ 116.720872] ata2.00: error: {ABRT }
[ 116.724396] ata_eh_recover: ENTER
[ 116.727748] ata_eh_revalidate_and_
[ 116.750011] ata_dev_set_xfermode: EXIT, err_mask=0
[ 116.754859] ata_sg_setup: 1 sg elements mapped
[ 116.759372] ata_72] ata2.00: configured for UDMA/133
[ 116.773077] ata_eh_recover: EXIT, rc=0
[ 116.776862] ata2: EH complete
[ 116.77986[ 116.789787] ata_scsi_timed_out: ENTER
[ 116.793488] ata_scsi_timed_out: EXIT, ret=0
[ 116.797709] ata_scsi_error: ENTER] ata_eh_link_autopsy: EXIT
[ 116.812330] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 116.818802] ata2.00: ta2.00: status: {DRDY ERR }
[ 116.842195] ata2.00: error: {ABRT }
[ 116.845719] ata_eh_recover: ENTER
[ 116.849072] ata_e_port_flush_task: ENTER
[ 116.861970] ata_dev_set_xfermode: set features - xfer mode
[ 116.867505] ata_port_flush_task: ENTs mapped
[ 116.880650] ata_port_flush_task: ENTER
[ 116.884446] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 116.8902: EH complete
[ 116.901144] ata_scsi_error: EXIT
[ 116.904412] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 116.929920] ata_eh_link_autopsy: EXIT
[ 116.933618] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 116.94ag 0 cdb 0x0 data 0
[ 116.944048] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 116.959520] ENTER
[ 116.970359] ata_eh_revalidate_and_attach: ENTER
[ 116.974948] ata_sg_setup: 1 sg elements mapped
[ 116.979460] atup: 1 sg elements mapped
[ 117.001937] ata_port_flush_task: ENTER
[ 117.005733] ata_dev_set_mode: xfer_shift=12, xfer_mode= 117.019429] ata2: EH complete
[ 117.022432] ata_scsi_error: EXIT
[ 117.025699] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 0ret=0
[ 117.040278] ata_scsi_error: ENTER
[ 117.043628] ata_port_flush_task: ENTER
[ 117.047416] ata_eh_link_autopsy: ENT00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 117.065329] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 117.080801] ata2.00: status: {DRDY ERR }
[ 117.084763] ata2.00: error: {ABRT }
[ 117.088287] ata_eh_recover: ENTER
[ nts mapped
[ 117.100741] ata_port_flush_task: ENTER
[ 117.104538] ata_dev_set_xfermode: set features - xfer mode
[ 117.11de: xfer_shift=12, xfer_mode=0x46
[ 117.132619] ata2.00: configured for UDMA/133
[ 117.136921] ata_eh_recover: EXIT, rc=0
db: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 117.153632] ata_scsi_timed_out: ENTER
[ 117.157327] ata_scsi_timed_out: EXIT686] ata_eh_link_autopsy: ENTER
[ 117.172469] ata_eh_link_autopsy: EXIT
[ 117.176169] ata2.00: exception Emask 0x0 SAct 0x000:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 117.186599] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 [ 117.209557] ata_eh_recover: ENTER
[ 117.212910] ata_eh_revalidate_and_attach: ENTER
[ 117.217498] ata_sg_setup: 1 sg eleatures - xfer mode
[ 117.231343] ata_port_flush_task: ENTER
[ 117.235129] ata_dev_set_xfermode: EXIT, err_mask=0
[ 117.23 ata_eh_recover: EXIT, rc=0
[ 117.261979] ata2: EH complete
[ 117.264982] ata_scsi_error: EXIT
[ 117.268250] ata_scsi_dum605] ata_scsi_timed_out: EXIT, ret=0
[ 117.282827] ata_scsi_error: ENTER
[ 117.286177] ata_port_flush_task: ENTER
[ 117.2 exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 117.303920] ata2.00: irq_stat 0x40000001
[ 117.307877] ata2.00: cmd e5/error: {ABRT }
[ 117.330839] ata_eh_recover: ENTER
[ 117.334190] ata_eh_revalidate_and_attach: ENTER
[ 117.338778] ata_sgxfermode: set features - xfer mode
[ 117.352623] ata_port_flush_task: ENTER
[ 117.356407] ata_dev_set_xfermode: EXIT, err_m
[ 117.369563] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 117.375170] ata2.00: configured for UDMA/133
[ 117.379473
[ 117.389529] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 117.396192] ata_scsi_timed_out: ENTER
[ 117.3t_flush_task: ENTER
[ 117.411246] ata_eh_link_autopsy: ENTER
[ 117.415028] ata_eh_link_autopsy: EXIT
[ 117.418726] ata2.0[ 117.430451] ata2.00: irq_stat 0x40000001
[ 117.434415] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 datarecover: ENTER
[ 117.460734] ata_eh_revalidate_and_attach: ENTER
[ 117.465322] ata_sg_setup: 1 sg elements mapped
[ 117.469836] ata_port_flush_task: ENTER
[ 117.473633] ata_dev_set_xfermode: set features - xfer mode
[ 117.479168] ata_port_flush_shift=12, xfer_mode=0x46
[ 117.501715] ata2.00: configured for UDMA/133
[ 117.506017] ata_eh_recover: EXIT, rc=0
[ 117.5(2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 117.522728] ata_scsi_timed_out: ENTER
[ 117.526422] ata_scsi_timed_out: EXIT, ret=0
[ 117.530644] ata_scsi_error: ENTER
[ 117.533995] ata_port_flush_task: ENTER
[ 117.537782] ata_eh_link_autopsy: ENTER
[ 0:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 117.555702] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device578662] ata_eh_recover: ENTER
[ 117.582012] ata_eh_revalidate_and_attach: ENTER
[ 117.586603] ata_sg_setup: 1 sg elements m xfer mode
[ 117.600448] ata_port_flush_task: ENTER
[ 117.604233] ata_dev_set_xfermode: EXIT, err_mask=0
[ 117.609078] at_set_mode: xfer_shift=12, xfer_mode=0x46
[ 117.622993] ata2.00: configured for UDMA/133
[ 117.627298] ata_eh_recover: EXIT,[ 118.633003] .<3>ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 118.640061] ata_scsi_timed_out: ENTER
[ 118.643757] ata_scsi_timed_out: EXIT, ret=0
[ 118.647979] ata_scsi_error: ENTER
[ 118.651327] ata_port_flush_task: ENTER
[ 118.655117] ata_eh_link_autopsy: ENTER
[ 118.658899] ata_eh_link_autopsy: EXIT
[ 118.662597] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 118.669070] ata2.00: irq_stat 0x40000001
[ 118.673027] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 118.673028] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 118.688500] ata2.00: status: {DRDY ERR }
[ 118.692462] ata2.00: error: {ABRT }
[ 118.695986] ata_eh_recover: ENTER
[ 118.699339] ata_eh_revalidate_and_attach: ENTER
[ 118.703927] ata_sg_setup: 1 sg elements mapped
[ 118.708441] ata_port_flush_task: ENTER
[ 118.712236] ata_dev_set_xfermode: set features - xfer mode
[ 118.717773] ata_port_flush_task: ENTER
[ 118.721557] ata_dev_set_xfermode: EXIT, err_mask=0
[ 118.726405] ata_sg_setup: 1 sg elements mapped
[ 118.730917] ata_port_flush_task: ENTER
[ 118.734713] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 118.740320] ata2.00: configured for UDMA/133
[ 118.744622] ata_eh_recover: EXIT, rc=0
[ 118.748408] ata2: EH complete
[ 118.751411] ata_scsi_error: EXIT
[ 118.754679] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 118.761342] ata_scsi_timed_out: ENTER
[ 118.765034] ata_scsi_timed_out: EXIT, ret=0
[ 118.769258] ata_scsi_error: ENTER
[ 118.772608] ata_port_flush_task: ENTER
[ 118.776396] ata_eh_link_autopsy: ENTER
[ 118.780178] ata_eh_link_autopsy: EXIT
[ 118.783876] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 118.790351] ata2.00: irq_stat 0x40000001
[ 118.794315] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 118.794316] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 118.809788] ata2.00: status: {DRDY ERR }
[ 118.813750] ata2.00: error: {ABRT }
[ 118.817274] ata_eh_recover: ENTER
[ 118.820626] ata_eh_revalidate_and_attach: ENTER
[ 118.825215] ata_sg_setup: 1 sg elements mapped
[ 118.829728] ata_port_flush_task: ENTER
[ 118.833525] ata_dev_set_xfermode: set features - xfer mode
[ 118.839060] ata_port_flush_task: ENTER
[ 118.842846] ata_dev_set_xfermode: EXIT, err_mask=0
[ 118.847692] ata_sg_setup: 1 sg elements mapped
[ 118.852205] ata_port_flush_task: ENTER
[ 118.856001] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 118.861607] ata2.00: configured for UDMA/133
[ 118.865910] ata_eh_recover: EXIT, rc=0
[ 118.869695] ata2: EH complete
[ 118.872699] ata_scsi_error: EXIT
[ 118.875967] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 118.882630] ata_scsi_timed_out: ENTER
[ 118.886322] ata_scsi_timed_out: EXIT, ret=0
[ 118.890546] ata_scsi_error: ENTER
[ 118.893896] ata_port_flush_task: ENTER
[ 118.897684] ata_eh_link_autopsy: ENTER
[ 118.901466] ata_eh_link_autopsy: EXIT
[ 118.905164] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 118.911637] ata2.00: irq_stat 0x40000001
[ 118.915594] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 118.915595] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 118.931069] ata2.00: status: {DRDY ERR }
[ 118.935029] ata2.00: error: {ABRT }
[ 118.938555] ata_eh_recover: ENTER
[ 118.941905] ata_eh_revalidate_and_attach: ENTER
[ 118.946495] ata_sg_setup: 1 sg elements mapped
[ 118.951009] ata_port_flush_task: ENTER
[ 118.954803] ata_dev_set_xfermode: set features - xfer mode
[ 118.960341] ata_port_flush_task: ENTER
[ 118.964125] ata_dev_set_xfermode: EXIT, err_mask=0
[ 118.968972] ata_sg_setup: 1 sg elements mapped
[ 118.973485] ata_port_flush_task: ENTER
[ 118.977281] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 118.982887] ata2.00: configured for UDMA/133
[ 118.987190] ata_eh_recover: EXIT, rc=0
[ 118.990975] ata2: EH complete
[ 118.993979] ata_scsi_error: EXIT
[ 118.997246] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 119.003901] ata_scsi_timed_out: ENTER
[ 119.007602] ata_scsi_timed_out: EXIT, ret=0
[ 119.011825] ata_scsi_error: ENTER
[ 119.015176] ata_port_flush_task: ENTER
[ 119.018963] ata_eh_link_autopsy: ENTER
[ 119.022745] ata_eh_link_autopsy: EXIT
[ 119.026445] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 119.032917] ata2.00: irq_stat 0x40000001
[ 119.036875] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 119.036876] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 119.052357] ata2.00: status: {DRDY ERR }
[ 119.056317] ata2.00: error: {ABRT }
[ 119.059843] ata_eh_recover: ENTER
[ 119.063193] ata_eh_revalidate_and_attach: ENTER
[ 119.067784] ata_sg_setup: 1 sg elements mapped
[ 119.072298] ata_port_flush_task: ENTER
[ 119.076095] ata_dev_set_xfermode: set features - xfer mode
[ 119.081629] ata_port_flush_task: ENTER
[ 119.085414] ata_dev_set_xfermode: EXIT, err_mask=0
[ 119.090259] ata_sg_setup: 1 sg elements mapped
[ 119.094773] ata_port_flush_task: ENTER
[ 119.098567] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 119.104174] ata2.00: configured for UDMA/133
[ 119.108479] ata_eh_recover: EXIT, rc=0
[ 119.112264] ata2: EH complete
[ 119.115267] ata_scsi_error: EXIT
[ 119.118535] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 119.125189] ata_scsi_timed_out: ENTER
[ 119.128892] ata_scsi_timed_out: EXIT, ret=0
[ 119.133113] ata_scsi_error: ENTER
[ 119.136464] ata_port_flush_task: ENTER
[ 119.140251] ata_eh_link_autopsy: ENTER
[ 119.144033] ata_eh_link_autopsy: EXIT
[ 119.147731] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 119.154206] ata2.00: irq_stat 0x40000001
[ 119.158170] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 119.158171] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 119.173643] ata2.00: status: {DRDY ERR }
[ 119.182856] ata2.00: error: {ABRT }
[ 119.186380] ata_eh_recover: ENTER
[ 119.189730] ata_eh_revalidate_and_attach: ENTER
[ 119.194321] ata_sg_setup: 1 sg elements mapped
[ 119.198833] ata_port_flush_task: ENTER
[ 119.202630] ata_dev_set_xfermode: set features - xfer mode
[ 119.208165] ata_port_flush_task: ENTER
[ 119.211950] ata_dev_set_xfermode: EXIT, err_mask=0
[ 119.216797] ata_sg_setup: 1 sg elements mapped
[ 119.221310] ata_port_flush_task: ENTER
[ 119.225106] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 119.230710] ata2.00: configured for UDMA/133
[ 119.235015] ata_eh_recover: EXIT, rc=0
[ 119.238801] ata2: EH complete
[ 119.241805] ata_scsi_error: EXIT
[ 119.245072] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 119.251726] ata_scsi_timed_out: ENTER
[ 119.255427] ata_scsi_timed_out: EXIT, ret=0
[ 119.259648] ata_scsi_error: ENTER
[ 119.262999] ata_port_flush_task: ENTER
[ 119.266788] ata_eh_link_autopsy: ENTER
[ 119.270571] ata_eh_link_autopsy: EXIT
[ 119.274269] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 119.280741] ata2.00: irq_stat 0x40000001
[ 119.284699] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 119.284700] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 119.300174] ata2.00: status: {DRDY ERR }
[ 119.304134] ata2.00: error: {ABRT }
[ 119.307658] ata_eh_recover: ENTER
[ 119.311010] ata_eh_revalidate_and_attach: ENTER
[ 119.315598] ata_sg_setup: 1 sg elements mapped
[ 119.835981] __ata_port_freeze: ata2 port frozen
[ 119.840544] ata_port_flush_task: ENTER
[ 119.844336] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x40)
[ 119.850553] ata2.00: revalidation failed (errno=-5)
[ 119.855470] ata_eh_revalidate_and_attach: EXIT rc=-5
[ 119.860467] ata2: failed to recover some devices, retrying in 5 secs
[ 124.866425] __ata_port_freeze: ata2 port frozen
[ 127.071953] ata2: soft resetting link
[ 127.075650] ahci_do_softreset: ENTER
[ 127.079263] ahci_do_softreset: PHY reports no device
[ 127.084260] ata_std_postreset: ENTER
[ 127.087872] ata2: SATA link down (SStatus 11 SControl 310)
[ 127.093390] ata_std_postreset: EXIT
[ 127.096915] ata_eh_thaw_port: ata2 port thawed
[ 127.101393] ata_eh_revalidate_and_attach: ENTER
[ 127.105959] ata_eh_revalidate_and_attach: EXIT rc=-5
[ 127.110957] ata2.00: limiting speed to UDMA/133:PIO2
[ 127.115953] ata2: failed to recover some devices, retrying in 5 secs