queued patches for SCSI for 2.6.24

From: James Bottomley
Date: Tue Sep 25 2007 - 21:00:25 EST

Andrew asked that I provide a status report of pending updates. The
list is attached below. It's pretty much driver updates and minor bug
fixes. The main functionality changes are Kay's sysfs updates and the
shift of the ULD attachement towards the block prep function.



Adrian Bunk (2):
make scsi_decode_sense_buffer and scsi_decode_sense_extras static
scsi_error.c should #include "scsi_transport_api.h"

Alan Cox (3):
dtc: Fix typo
eata_pio: Clean up proc handling, bracketing and use cpu_relax()
dtc: clean up indent damage and add printk levels

Andrew Morton (3):
ips: warning fix
aacraid: rename check_reset
bsg: declare structures for the non BSG case

Andrew Vasquez (15):
qla2xxx: Update version number to 8.02.00-k4.
qla2xxx: Limit iIDMA speed adjustments.
qla2xxx: Rework MSI-X handlers.
qla2xxx: Clear options-flags while staging firmware-execution.
qla2xxx: Sparse cleanups in qla_mid.c
qla2xxx: Cleanup several 'sparse' warnings.
qla2xxx: Use shost_priv().
qla2xxx: Remove unused member (list) from srb_t structure.
qla2xxx: Use the correct pointer-address during NVRAM writes.
qla2xxx: Set correct attribute count during FDMI RPA.
qla2xxx: Query additional RISC registers during ISP25XX firmware dump.
qla2xxx: Correct staging of RISC while attempting to pause.
qla2xxx: Query additional RISC information during a pause.
qla2xxx: Add flash burst-read/write support.
qla2xxx: Collapse and simplify ISP2XXX firmware dump routines.

Bartlomiej Zolnierkiewicz (1):
MAINTAINERS: mark ide-scsi as Orphan

Bernhard Walle (1):
ips: Update version information

Boaz Harrosh (2):
ide-scsi.: convert to data accessors and !use_sg cleanup
microtek: use data accessors and !use_sg cleanup

Christof Schmitt (5):
zfcp: Enable debug feature before setting adapter online
scsi_transport_fc: Introduce disable_target_scan flag
zfcp: Remove braces for only one statement
zfcp: Remove unnecessary assignment
zfcp: correct indentation for nested if-else

David Miller (1):
esp: fix instance numbering.

David Woodhouse (1):
Fix ibmvscsi client for multiplatform iSeries+pSeries kernel

Eric Moore (10):
MAINTAINERS : mpt fusion mailing list change
mpt fusion: bump version to 3.04.06
mpt fusion: Kconfig cleanup
mpt fusion: removing Dell copyright
mpt fusion: removing references to hd->ioc
mpt fusion: rename vdev to vdevice
mpt fusion: adding/removing white space
mpt fusion: standardize printks and debug info
mpt fusion: Add support for ATTO 4LD: Rebranded LSI 53C1030
Addition to pci_ids.h for ATTO Technology, Inc.

FUJITA Tomonori (17):
srp_transport: convert to use supported_mode attribute
fc_transport: add target driver support
add supported_mode and active_mode attributes to the host
tgt: fix can_queue bug
fc4: convert to use the data buffer accessors
sg: increase sglist_len of the sg_scatter_hold structure
ps3rom: convert to use the data buffer accessors
scsi_transport_srp: remove tgt dependencies
tgt: convert ibmvstgt to use transport tsk_mgmt_response callback
tgt: move tsk_mgmt_response callback to transport class
tgt: convert libsrp and ibmvstgt to use srp_transport
srp_transport: add target driver support
tgt: add I_T nexus support
transport_srp: add rport roles attribute
ib_srp: convert to use the srp transport class
ibmvscsi: convert to use the srp transport class
add srp transport class

Gabriel C (1):
NCR5380: fix NCR53C400_PSEUDO_DMA is not defined

Gilbert Wu (1):
aic94xx: Add new PCI ID for ASC58300

Heiko Carstens (3):
zfcp: avoid if (whatever) ; constructs.
zfcp: allocate gid_pn_data objects from gid_pn_cache.
zfcp: fix memory leak.

HighPoint Linux Team (1):
hptiop: adding new firmware interface and more PCI device IDs

James Bottomley (3):
sg: use idr to replace static arrays
move ULD attachment into the prep function
arcmsr: fix compile problems

Jan Engelhardt (1):
mpt fusion: Use menuconfig objects

Jeff Garzik (2):
arcmsr: irq handler fixes, cleanups, micro-opts
arcmsr: Fix hardware wait loops

Jesper Juhl (3):
mpt fusion: fix two potential mem leaks
NCR_D700, lpfc: Clean up duplicate includes
lpfc: fix potential overflow of hbqs array

Joe Carnuccio (1):
qla2xxx: Allow region-based flash-part accesses.

Kay Sievers (1):
switch sdev sysfs attributes to default attributes

Mariusz Kozlowski (3):
mpt fusion: remove redundant memset
mpt fusion: mostly kmalloc + memset conversion to kzalloc
kmalloc + memset conversion to kzalloc

Masatake YAMATO (1):
Fix signness of parameters in scsi module

Matthew Wilcox (49):
ips: Close narrow race in release
aic94xx: Free scsi host on error
simscsi: Free scsi host on error
qlogicfas: Close narrow race in release
aha152x: Close narrow race in release
ncr53c8xx: Call scsi_host_put in release
ide-scsi: Close narrow race in release
ibmmca: Stop leaking scsi_hosts on exit
scsi_scan: Cope with kthread_run failing
Improve error message when offlining a device
advansys: Use DRV_NAME
advansys: Comment/indentation/macro cleanup
advansys: Remove some custom wrappers
advansys: Remove a check for an impossible condition
advansys: Support 16-byte commands properly
advansys: Enable interrupts earlier in queuecommand
advansys: Remove `active' queue and all remaining internal queueing code
advansys: Remove `done' queue
advansys: Remove a check for an impossible condition
advansys: Remove `waiting' queue
advansys: Shrink advansys_board_found a little more
advansys: Reformat microcode
advansys: Create AdvLoadMicrocode
advansys: Create AdvBuildCarrierFreelist
advansys: Fix VLB driver name
advansys: Move documentation to Documentation/scsi
advansys: use memcpy instead of open-coded loop
advansys: Remove pci_slot_info
advansys: Remove library-style callback routines
advansys: Move struct device out of the cfg structures
advansys: Stop using n_io_port in Scsi_Host structure
advansys: ioremap no longer needs page-aligned addresses
advansys: delete AscGetChipBusType
advansys: misc reformatting
advansys: remove INQUIRY sniffing
Add QUANTUM XP34301 to the blacklist
advansys: remove AscCompareString()
advansys: More PCI cleanups
advansys: Update resource management
advansys: Convert to ISA driver model
advansys: Convert to EISA driver model
advansys: Convert to PCI driver model
advansys: Move to scsi hotplug initialisation model
advansys: Make advansys_board_found a little more readable
advansys: Stop checking the scsi_cmnd belongs to our Scsi_Host
advansys: Improve interrupt handler
advansys: Clean up proc_info implementation
advansys: undate version, copyright, etc
Fix async scanning double-add problems

Matthias Kaehlcke (1):
osst: Use mutex instead of semaphore

Michael Reed (1):
stale residual returned on write following BUSY retry

Mike Christie (1):
fix write buffer length in scsi_req_map_sg()

Nick Cheng (1):
arcmsr: add SATA RAID plus other fixes

Prakash, Sathya (5):
mpt fusion: Change company name from LSI Logic to LSI
mpt fusion: Link speed change display support
mpt fusion: Creation of mptsas.h header file
mpt fusion: Change call back indices to u8 from int
mpt fusion: Usage of high priority request FIFO to send task management commands

Ravi Anand (1):
qla2xxx: Correct infinite-login-retry issue.

Salyzyn, Mark (1):
aacraid: Add documentation for new Adaptec, SMC and SUN cards

Seokmann Ju (2):
qla2xxx: Retrieve max-NPIV support capabilities from FW.
qla2xxx: Add PCI error recovery support.

Swen Schillig (2):
zfcp: whitespace cleanup
zfcp: cleanup, separation of ERP, non ERP-version for exchange_ functions

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/