[PATCH] pci: Fix e100 interrupt quirk

[Valentine Barshak]

PCI memory space may have a 64-bit offset on some architectures
(for example, PowerPC 440) and the actual PCI memory address
has to fixed up (an offset to PCI mem space shuld be added)
before remapping. So, pci_iomap should be used instead of
reading and remapping PCI BAR directly. This has been tested
on Sequoia PowerPC 440EPx board.

Signed-off-by: Valentine Barshak <vbarshak@xxxxxxxxxxxxx>
---

diff -ruN linux-2.6.orig/drivers/pci/quirks.c linux-2.6/drivers/pci/quirks.c
--- linux-2.6.orig/drivers/pci/quirks.c	2007-09-18 15:32:48.000000000 +0400
+++ linux-2.6/drivers/pci/quirks.c	2007-09-19 15:57:26.000000000 +0400
@@ -1444,7 +1444,6 @@
 static void __devinit quirk_e100_interrupt(struct pci_dev *dev)
 {
 	u16 command;
-	u32 bar;
 	u8 __iomem *csr;
 	u8 cmd_hi;
 
@@ -1476,16 +1475,18 @@
 	 * re-enable them when it's ready.
 	 */
 	pci_read_config_word(dev, PCI_COMMAND, &command);
-	pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar);
 
-	if (!(command & PCI_COMMAND_MEMORY) || !bar)
+	if (!(command & PCI_COMMAND_MEMORY))
 		return;
 
-	csr = ioremap(bar, 8);
+	if (pci_request_region(dev, 0, "e100_quirk"))
+		return;
+
+	csr = pci_iomap(dev, 0, 8);
 	if (!csr) {
 		printk(KERN_WARNING "PCI: Can't map %s e100 registers\n",
 			pci_name(dev));
-		return;
+		goto e100_quirk_exit;
 	}
 
 	cmd_hi = readb(csr + 3);
@@ -1495,7 +1496,9 @@
 		writeb(1, csr + 3);
 	}
 
-	iounmap(csr);
+	pci_iounmap(dev, csr);
+e100_quirk_exit:
+	pci_release_region(dev, 0);
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, quirk_e100_interrupt);
 
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/