Re: SYSFS: need a noncaching read

[Nick Piggin]

On Wednesday 12 September 2007 20:01, Greg KH wrote:
> On Wed, Sep 12, 2007 at 07:32:07AM +0200, Robert Schwebel wrote:
> > On Tue, Sep 11, 2007 at 11:43:17AM +0200, Heiko Schocher wrote:
> > > I have developed a device driver and use the sysFS to export some
> > > registers to userspace.
> >
> > Uuuh, uggly. Don't do that. Device drivers are there to abstract things,
> > not to play around with registers from userspace.
> >
> > > I opened the sysFS File for one register and did some reads from this
> > > File, but I alwas becoming the same value from the register, whats not
> > > OK, because they are changing. So I found out that the sysFS caches
> > > the reads ... :-(
> >
> > Yes, it does. What you can do is close()ing the file handle between
> > accesses, which makes it work but is slow.
>
> Do an lseek back to 0 and then re-read, you will get called in your
> driver again.

Can you do a pread with offset 0 to avoid the two syscalls? (which some
people seem to be concerned about)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/