Re: UART misbehaves under Linkstation/KuroBoxHG

[Oncaphillis]

 Removing the getty from initd did the trick.

 And you're right AVR is disabled by the kernel
 found the code in ./arch/powerpc/platforms/embedded6xx/ls_uart.c

 Tkank you


Guennadi Liakhovetski wrote:
> On Thu, 9 Aug 2007, Oncaphillis wrote:
> >   I hope I found the the misconfigured part. I didn't look
> >   at /etc/inittab. It opens a getty on /dev/ttyS0. That
> >   might do the trick. Have to recompile my kernel right now with
> >   standard config to check this out.
>
> Hm, for that you don't have to recompile the kernel... unless you modified 
> it before, of course. Just change your inittab and reboot.
>
> >   Well ... it doesn't seem to need the daemons but at least
> >   the kuro_boot  script or something similar has to be executed
> >   once sending the right init strings to the AVR or your system
> >   reboots after a few minutes at least on my box.
>
> No, shouldn't be needed either. You should get a string in dmesg like 
> "linkstation: disarming the AVR watchdog:", and the watchdog should be 
> off. Just take the original .dts, unmodified kernel sources and close 
> enough to original (arch/powerpc/configs/linkstation_defconfig) .config 
> and it should work.
>
> Thanks
> Guennadi
> ---
> Guennadi Liakhovetski
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/