Re: [PATCH try#5] Blackfin ethernet driver: on chip ethernet MACcontroller driver

[YOSHIFUJI Hideaki / 吉藤英明]

Hello.

In article <1184604542.6107.44.camel@roc-laptop> (at Tue, 17 Jul 2007 00:49:02 +0800), Bryan Wu <bryan.wu@xxxxxxxxxx> says:

> +static void bf537mac_set_multicast_list(struct net_device *dev)
> +{
> +	u32 sysctl;
> +
> +	if (dev->flags & IFF_PROMISC) {
> +		printk(KERN_INFO "%s: set to promisc mode\n", dev->name);
> +		sysctl = bfin_read_EMAC_OPMODE();
> +		sysctl |= RAF;
> +		bfin_write_EMAC_OPMODE(sysctl);
> +	} else if (dev->flags & IFF_ALLMULTI || dev->mc_count > 16) {
> +		/* accept all multicast */
> +		sysctl = bfin_read_EMAC_OPMODE();
> +		sysctl |= PAM;
> +		bfin_write_EMAC_OPMODE(sysctl);
> +	} else if (dev->mc_count) {
> +		/* set multicast */
> +	} else {
> +		/* clear promisc or multicast mode */
> +		sysctl = bfin_read_EMAC_OPMODE();
> +		sysctl &= ~(RAF | PAM);
> +		bfin_write_EMAC_OPMODE(sysctl);
> +	}
> +}
> +

Is this function really correct?

Please make sure to set up multicast list on device, or
set "all multi" on device if you do not know what to do; e.g.

static void bf537mac_set_multicast_list(struct net_device *dev)
{
     u32 sysctl;

     if (dev->flags & IFF_PROMISC) {
             printk(KERN_INFO "%s: set to promisc mode\n", dev->name);
             sysctl = bfin_read_EMAC_OPMODE();
             sysctl |= RAF;
             bfin_write_EMAC_OPMODE(sysctl);
     } else if (dev->flags & IFF_ALLMULTI || dev->mc_count) {
             /* accept all multicast */
             sysctl = bfin_read_EMAC_OPMODE();
             sysctl |= PAM;
             bfin_write_EMAC_OPMODE(sysctl);
     } else {
             /* clear promisc or multicast mode */
             sysctl = bfin_read_EMAC_OPMODE();
             sysctl &= ~(RAF | PAM);
             bfin_write_EMAC_OPMODE(sysctl);
     }
}
--yoshfuji
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/