Re: [PATCH 1/3] Make the IDE DMA timeout modifiable

From: Sergei Shtylyov
Date: Fri Jul 13 2007 - 16:06:27 EST


Mark Lord wrote:

O> >> BTW, why the timeout is so damn long? 2*WAIT_CMD is 20 secs, and if DMA is not complete or interrupt pending, it may wait 10 more secs...

..

I've lost the original question from this thread, but the idea of the

The original question concerned specifically the DMA command timeout which is twice more than the usual one, WAIT_CMD (10 seconds).

longish
timeouts was that drive *may* be spun down ("standby"), and thus have to spin
up again to complete media commands. Back then, drives were much slower at
spinning up than nowadays, and the ATA spec says to allow up to 30 seconds.

Well, that doesn't explain the DMA case.

When a drive is in standby, we don't send it anything special to wake up.

Wait, aren't we sending IDLE on resume step 2 -- looking at ide-io.cide_start_power_step()?

Cheers

MBR, Sergei
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/