Re: [BUG] IT8212 libata driver *still* hard-freezes system on booton 2.6.22 final.

From: Rodney Gordon II
Date: Mon Jul 09 2007 - 08:45:12 EST


On Mon, 2007-07-09 at 13:16 +0100, Alan Cox wrote:
> > > It would be useful to know if a kernel built with no DMA support for the
> > > IT8212 behaved as that might give us a clue about what is choking. If you
> > > look in drivers/ata/pata_it821x.c:it821x_init_one you'll see a pair of
> > > lines that say
> > >
> > > mwdma = 0x1f,
> > > udma_mask = 0x7f
> > >
> > >
> > > remove, rebuild and report..
> >
> > Alright.
> >
> > Attachment [0] is a successful boot with those lines removed. (This a
> > good thing or a bad thing? :)
>
> Thats an interesting question in itself. It does seem to indicate the
> problem is DMA tuning or DMA related and not IRQ routing - which is good
> as of itself.
>
> > Attachment [1] is a successful boot with the old ata subsystem using the
> > IT8212.
>
> For the next trick set mwdma_mask = 0x07 but leave UDMA off and see what
> happens.

Lock.

> Then try with udma_mask = 0x02 which should force the 50MHz
> clock on not the 66MHz clock just in case its clock related.

Lock. :(

> How much RAM do you have ?

1536MB, using highmem 4GB. Please refer to my dmesg attachments in the
last post for more RAM info :)

> Alan

-r

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/