Re: 2.6.22-rc: regression: no irda0 interface (2.6.21 was OK), smsc does not find chip

[Bjorn Helgaas]

[patch] PNP SMCf010 quirk: work around Toshiba Portege 4000 ACPI issues

When we enable the SMCf010 IR device, the Toshiba Portege 4000 BIOS claims
the device is working, but it really isn't configured correctly.  The BIOS
*will* configure it, but only if we call _SRS after (1) reversing the order
of the SIR and FIR I/O port regions and (2) changing the IRQ from active-high
to active-low.

This patch fixes the 2.6.22 regression:
    "no irda0 interface (2.6.21 was OK), smsc does not find chip"

I tested this on a Portege 4000.  The smsc-ircc2 driver correctly detects
the device, and "irattach irda0 -s && irdadump" shows transmitted and
received packets.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@xxxxxx>

Index: w/drivers/pnp/quirks.c
===================================================================
--- w.orig/drivers/pnp/quirks.c	2007-06-27 20:07:45.000000000 -0600
+++ w/drivers/pnp/quirks.c	2007-06-29 19:28:02.000000000 -0600
@@ -136,11 +136,10 @@
 
 static void quirk_smc_enable(struct pnp_dev *dev)
 {
-	/*
-	 * If the BIOS left the device disabled, or it is enabled and
-	 * responding correctly, we're in good shape.
-	 */
-	if (!dev->active || quirk_smc_fir_enabled(dev))
+	struct resource fir, sir, irq;
+
+	pnp_activate_dev(dev);
+	if (quirk_smc_fir_enabled(dev))
 		return;
 
 	/*
@@ -152,16 +151,58 @@
 	 * this.  Fortunately, they do fix things up if we auto-configure
 	 * the device using its _PRS and _SRS methods.
 	 */
-	dev_err(&dev->dev, "%s device not responding, auto-configuring "
-		"resources\n", dev->id->id);
+	dev_err(&dev->dev, "%s not responding at SIR 0x%llx, FIR 0x%llx; "
+		"auto-configuring\n", dev->id->id,
+		pnp_port_start(dev, 0), pnp_port_start(dev, 1));
 
 	pnp_disable_dev(dev);
 	pnp_init_resource_table(&dev->res);
 	pnp_auto_config_dev(dev);
 	pnp_activate_dev(dev);
+	if (quirk_smc_fir_enabled(dev)) {
+		dev_err(&dev->dev, "responds at SIR 0x%llx, FIR 0x%llx\n",
+			pnp_port_start(dev, 0), pnp_port_start(dev, 1));
+		return;
+	}
+
+	/*
+	 * The Toshiba Portege 4000 _CRS reports the FIR region first,
+	 * followed by the SIR region.  The BIOS will configure the bridge,
+	 * but only if we call _SRS with SIR first, then FIR.  It also
+	 * reports the IRQ as active high, when it is really active low.
+	 */
+	dev_err(&dev->dev, "not responding at SIR 0x%llx, FIR 0x%llx; "
+		"swapping SIR/FIR and reconfiguring\n",
+		pnp_port_start(dev, 0), pnp_port_start(dev, 1));
+
+	/*
+	 * Clear IORESOURCE_AUTO so pnp_activate_dev() doesn't reassign
+	 * these resources any more.
+	 */
+	fir = dev->res.port_resource[0];
+	sir = dev->res.port_resource[1];
+	fir.flags &= ~IORESOURCE_AUTO;
+	sir.flags &= ~IORESOURCE_AUTO;
+
+	irq = dev->res.irq_resource[0];
+	irq.flags &= ~IORESOURCE_AUTO;
+	irq.flags &= ~IORESOURCE_BITS;
+	irq.flags |= IORESOURCE_IRQ_LOWEDGE;
+
+	pnp_disable_dev(dev);
+	dev->res.port_resource[0] = sir;
+	dev->res.port_resource[1] = fir;
+	dev->res.irq_resource[0] = irq;
+	pnp_activate_dev(dev);
+
+	if (quirk_smc_fir_enabled(dev)) {
+		dev_err(&dev->dev, "responds at SIR 0x%llx, FIR 0x%llx\n",
+			pnp_port_start(dev, 0), pnp_port_start(dev, 1));
+		return;
+	}
 
-	if (!quirk_smc_fir_enabled(dev))
-		dev_err(&dev->dev, "giving up; try \"smsc-ircc2.nopnp\"\n");
+	dev_err(&dev->dev, "giving up; try \"smsc-ircc2.nopnp\" and "
+		"email bjorn.helgaas@xxxxxx\n");
 }
 
 
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/