Re: [BUG] ide dma_timer_expiry, then hard lockup

[Sergei Shtylyov]

Hello, I wrote:

> > I've got a hard lockup in the ide subsystem, probably
> > due to some irq spew or something like that.

> > I've just bought a brand new Maxtor 320GB disk driver for the insane 
> > price of $70 US to replace another failing drive. It works well under 
> > light load;
> > I was able to copy about 60GB to it. However, under heavy load, such 
> > as reconstruction of an MD RAID-1 array, it'll lock up the kernel.  
> > Which means
> > that my system won't boot :-(

> > I'm running 2.6.21.1, although the problem seems to occur in 2.6.19 
> > and 2.6.18 too; its been there a while; I vageuly
> > remember similar problems in 2.6.5 or 2.6.10.

>    Ah... so you're saying that the old disk works OK, yet you've already 
> observed alike behavior on other disks... That speaks against 
> blacklisting the drive.

   I'm going to shortly post the patches blacklisting the drive and using the 
proper HPT36x enablebits (as much as this stupid design may be fixed :-)...
Please test.

> > I can get the system to boot by sneaking in an "hdparm -d0 /dev/hdc" 
> > early in the boot process, to turn off 

>    Could probably do the same trick and specify the lower DMA speed by 
> using -X n option (where n ranges from 64 to 70 for UltraDMA modes 0 to 
> 6) and see if it changes anything...

   Note that for the hpt366.c driver, this is also achievable by setting 
HPT366_ALLOW_ATA66_[34] to 0 and recompiling. It will limit its UltraDMA 
capabilities to modes 2 or 3.

MBR, Sergei
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/