Re: 2.6.21.5: BUG: usbtouchscreen.c DMC TSC-10 wrong descriptor type / type->init() failed.

[Holger Schurig]

> After the reset, I got a 0x06 0x00 back, which is fine.
>
> But when the driver sets the coordinate output rate, the
> TSC-103 answered 0x15 0x01 which means that the TSC-10 is used
> with an EEPROM but the EEPROM data is empty (which is
> correct).
>
> In that case the driver should at least continue to allow
> initialization of the EEPROM later on.

No, I don't think so. Not in it's current form.


Currently, usbtouchscreen doesn't have any means to initialize an 
EEPROM. And in the absence of such a possibility, you need other 
means to accomplish your task. The current behavior provides you 
with this "plan b":

If you set the rate and that doesn't work because no EEPROM is 
there, the driver fails. While doing it, it will release the 
device.

This brings in the opportunity to access the touchscreen 
controller from userspace, e.g. with libusb, and write the 
EEPROM. After this, reboot, and be happy. Because now the device 
would act correctly on the "set rate" command and would be 
usable.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/