PREEMPT bug? (was: Re: [PROBLEM]: hdparm strange behaviour for 2.6.21 and later)

[Bartlomiej Zolnierkiewicz]

Hi,

On Sunday 24 June 2007, Thanos Kyritsis wrote:
> On Saturday 23 June 2007, Bartlomiej Zolnierkiewicz wrote:
> > Hi,
> 
> Hello, thanks for answering :-D
> 
> 
> > Also could you try running UP kernel without PREEMPT and see
> > if it makes difference?
> 
> Yes, it did make a difference. I've just tried both UP and SMP kernels 
> (22-rc5) *without* PREEMPT. Neither of these locked!

Thanks for testing.

IIRC SMP kernel without PREEMPT should also fail (or not?),
it could be that we are hitting some generic PREEMPT bug.

Cc:ed linux-kernel@ in hope that some PREEMPT guru lends us a hand.

[ original thread is here:
 http://www.mail-archive.com/linux-ide@xxxxxxxxxxxxxxx/msg07380.html ]

> I also tried UP with PREEMPT and it locks.
> 
> > Adding a couple of printk-s to ide.c::set_using_dma() and
> > ide.c::ide_spin_wait_hwgroup() will for sure help in debugging
> > it further.
> 
> I just tried that as well. I placed printk-s when entering and exiting 
> these 2 functions and when they use spin_lock_irq() and 
> spin_unlock_irq(), and then watched the output:
> 
> I didn't see something odd. For every hdparm execution, set_using_dma() 
> is called, it successfully calls ide_spin_wait_hwgroup(), then 
> set_using_dma() finishes.
> After set_using_dma() finishes, one more ide_spin_wait_hwgroup() 
> is called and finishes.
> 
> This pattern happens always, no matter if the kernel will eventually 
> lock (preempt) or not lock (no preempt), with absolutely no 
> differences. 
> 
> entering ide.c::set_using_dma()
> |
>   entering ide.c::ide_spin_wait_hwgroup()
>     ide.c::ide_spin_wait_hwgroup: LOCK
>   exiting ide.c::ide_spin_wait_hwgroup()
> |
> ide.c::set_using_dma: set ->busy flag, unlock and let it ride
> ide.c::set_using_dma: UNLOCK
> ide.c::set_using_dma: lock, clear ->busy flag and unlock before leaving
> ide.c::set_using_dma: LOCK
> ide.c::set_using_dma: UNLOCK
> |
> exiting ide.c::set_using_dma()
> 
> entering ide.c::ide_spin_wait_hwgroup()
> ide.c::ide_spin_wait_hwgroup: LOCK
> exiting ide.c::ide_spin_wait_hwgroup()
> 
> The above gets printed twice (one for the hda hdparm and one for hdb).
> 
> But I noticed something extra. 
> 
> Sometimes, the ide_spin_wait_hwgroup() that runs either before the 1st 
> set_using_dma() or between the 1st and the 2nd (1st for hda, 2nd for 
> hdb) (*but never the one called last*) is waiting A LOT inside the busy 
> loop (while (hwgroup->busy)).
> 
> I think PREEMPT kernels always produce a lot of this while loop output, 
> and then print the above pattern, then lock.
> 
> Non-PREEMPT kernels don't always produce the huge while loop output, 
> only sometimes, but they never have locking problem.
> I don't know if this is at all relevant to the problem. Perhaps it's 
> normal that during some of the bootups the IDE device group is busy 
> while during other bootups it's not busy, right ?

Yes, this is expected behavior (especially when you mix SMP in)
unless of course ide_spin_wait_hwgroupt() fails (timeouts).

> However, since all functions exit properly, should I try to place 
> printk-s in other functions as well ? 

ide_do_request() and hwgroup->busy flag but as this could produce *a*lot*
of output (serial or net console would be required to capture the log for
the lockup case).

> (I kind of need and appreciate guideance in order to help you, because 
> I've never been in the kernel hacking business before :) )

No problem, happy hacking. :)

Thanks,
Bart
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/