Re: Attansic L1 page corruption (was: 2.6.22-rc5: pdflush oops under heavy disk load)

[Luca]

On 6/25/07, Jay L. T. Cornwall <jay@xxxxxxxxxxx> wrote:
> Jay Cliburn wrote:
>
> > For reasons not yet clear to me, it appears the L1 driver has a bug or
> > the device itself has trouble with DMA in high memory.  This patch,
> > drafted by Luca Tettamanti, is being explored as a workaround.  I'd be
> > interested to know if it fixes your problem.
>
> Yes, it certainly seems to. Now running with this patch and 4GB active,
> I've transferred about 15GB with no problem so far. It usually oopses
> after a GB or two.
>
> I guess it's not an ideal solution, architecturally speaking, but it's a
> good deal better than an unstable driver.

It may cause a "bounce" (i.e. data is copied to another buffer in
lower memory) when a skb is allocated in high memory. Furthermore - at
least on AMD systems - it should be possible to use the IOMMU to remap
the memory to a bus address < 4GB.

Xiong can you comment on this issue? To recap: users are seeing hard
locks when L1 driver does a DMA to/from a high memory area (physical
address > 4GB). Limiting DMA to the lower 4GB with:

pci_set_dma_mask(pdev, DMA_32BIT_MASK);

cures the issue. Does L1 have any know problem decoding 64 addresses?

Luca
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/