[PATCH 3/5] UML - SIGIO support cleanup

From: Jeff Dike
Date: Thu Jun 14 2007 - 16:27:37 EST


Cleanup of the SIGWINCH support.

Some code and comment reformatting.

The stack used for SIGWINCH threads was leaked. This is now fixed by
storing it with the pid and other information, and freeing it when the
thread is killed.

If something goes wrong with a WIGWINCH thread, and this is discovered
in the interrupt handler, the winch record would leak. It is now
freed, except that the IRQ isn't freed. This is hard to do from
interrupt context. This has the side-effect that the IRQ system
maintains a reference to the freed structure, but that shouldn't cause
a problem since the descriptor is disabled.

register_winch_irq is now much better about cleaning up after an
initialization failure.

Signed-off-by: Jeff Dike <jdike@xxxxxxxxxxxxxxx>
--
arch/um/drivers/chan_user.c | 70 +++++++++++++++++++++-------------------
arch/um/drivers/line.c | 60 ++++++++++++++++++++++------------
arch/um/include/chan_user.h | 3 +
arch/um/os-Linux/skas/process.c | 2 -
4 files changed, 80 insertions(+), 55 deletions(-)

Index: linux-2.6.21-mm/arch/um/drivers/chan_user.c
===================================================================
--- linux-2.6.21-mm.orig/arch/um/drivers/chan_user.c 2007-06-14 15:33:37.000000000 -0400
+++ linux-2.6.21-mm/arch/um/drivers/chan_user.c 2007-06-14 16:04:12.000000000 -0400
@@ -51,19 +51,21 @@ error:
/*
* UML SIGWINCH handling
*
- * The point of this is to handle SIGWINCH on consoles which have host ttys and
- * relay them inside UML to whatever might be running on the console and cares
- * about the window size (since SIGWINCH notifies about terminal size changes).
+ * The point of this is to handle SIGWINCH on consoles which have host
+ * ttys and relay them inside UML to whatever might be running on the
+ * console and cares about the window size (since SIGWINCH notifies
+ * about terminal size changes).
*
- * So, we have a separate thread for each host tty attached to a UML device
- * (side-issue - I'm annoyed that one thread can't have multiple controlling
- * ttys for purposed of handling SIGWINCH, but I imagine there are other reasons
- * that doesn't make any sense).
+ * So, we have a separate thread for each host tty attached to a UML
+ * device (side-issue - I'm annoyed that one thread can't have
+ * multiple controlling ttys for the purpose of handling SIGWINCH, but
+ * I imagine there are other reasons that doesn't make any sense).
*
- * SIGWINCH can't be received synchronously, so you have to set up to receive it
- * as a signal. That being the case, if you are going to wait for it, it is
- * convenient to sit in sigsuspend() and wait for the signal to bounce you out of
- * it (see below for how we make sure to exit only on SIGWINCH).
+ * SIGWINCH can't be received synchronously, so you have to set up to
+ * receive it as a signal. That being the case, if you are going to
+ * wait for it, it is convenient to sit in sigsuspend() and wait for
+ * the signal to bounce you out of it (see below for how we make sure
+ * to exit only on SIGWINCH).
*/

static void winch_handler(int sig)
@@ -112,7 +114,8 @@ static int winch_thread(void *arg)

err = os_new_tty_pgrp(pty_fd, os_getpid());
if(err < 0){
- printk("winch_thread : new_tty_pgrp failed, err = %d\n", -err);
+ printk("winch_thread : new_tty_pgrp failed on fd %d, "
+ "err = %d\n", pty_fd, -err);
exit(1);
}

@@ -126,8 +129,9 @@ static int winch_thread(void *arg)
"err = %d\n", -count);

while(1){
- /* This will be interrupted by SIGWINCH only, since other signals
- * are blocked.*/
+ /* This will be interrupted by SIGWINCH only, since
+ * other signals are blocked.
+ */
sigsuspend(&sigs);

count = os_write_file(pipe_fd, &c, sizeof(c));
@@ -137,10 +141,10 @@ static int winch_thread(void *arg)
}
}

-static int winch_tramp(int fd, struct tty_struct *tty, int *fd_out)
+static int winch_tramp(int fd, struct tty_struct *tty, int *fd_out,
+ unsigned long *stack_out)
{
struct winch_data data;
- unsigned long stack;
int fds[2], n, err;
char c;

@@ -153,9 +157,11 @@ static int winch_tramp(int fd, struct tt
data = ((struct winch_data) { .pty_fd = fd,
.pipe_fd = fds[1] } );
/* CLONE_FILES so this thread doesn't hold open files which are open
- * now, but later closed. This is a problem with /dev/net/tun.
+ * now, but later closed in a different thread. This is a
+ * problem with /dev/net/tun, which if held open by this
+ * thread, prevents the TUN/TAP device from being reused.
*/
- err = run_helper_thread(winch_thread, &data, CLONE_FILES, &stack, 0);
+ err = run_helper_thread(winch_thread, &data, CLONE_FILES, stack_out, 0);
if(err < 0){
printk("fork of winch_thread failed - errno = %d\n", -err);
goto out_close;
@@ -187,25 +193,25 @@ static int winch_tramp(int fd, struct tt

void register_winch(int fd, struct tty_struct *tty)
{
- int pid, thread, thread_fd = -1;
- int count;
+ unsigned long stack;
+ int pid, thread, count, thread_fd = -1;
char c = 1;

if(!isatty(fd))
return;

pid = tcgetpgrp(fd);
- if(!CHOOSE_MODE_PROC(is_tracer_winch, is_skas_winch, pid, fd,
- tty) && (pid == -1)){
- thread = winch_tramp(fd, tty, &thread_fd);
- if(thread > 0){
- register_winch_irq(thread_fd, fd, thread, tty);
-
- count = os_write_file(thread_fd, &c, sizeof(c));
- if(count != sizeof(c))
- printk("register_winch : failed to write "
- "synchronization byte, err = %d\n",
- -count);
- }
+ if (!CHOOSE_MODE_PROC(is_tracer_winch, is_skas_winch, pid, fd, tty) &&
+ (pid == -1)) {
+ thread = winch_tramp(fd, tty, &thread_fd, &stack);
+ if (thread < 0)
+ return;
+
+ register_winch_irq(thread_fd, fd, thread, tty, stack);
+
+ count = os_write_file(thread_fd, &c, sizeof(c));
+ if(count != sizeof(c))
+ printk("register_winch : failed to write "
+ "synchronization byte, err = %d\n", -count);
}
}
Index: linux-2.6.21-mm/arch/um/drivers/line.c
===================================================================
--- linux-2.6.21-mm.orig/arch/um/drivers/line.c 2007-06-14 16:00:23.000000000 -0400
+++ linux-2.6.21-mm/arch/um/drivers/line.c 2007-06-14 16:04:12.000000000 -0400
@@ -749,8 +749,24 @@ struct winch {
int tty_fd;
int pid;
struct tty_struct *tty;
+ unsigned long stack;
};

+static void free_winch(struct winch *winch, int free_irq_ok)
+{
+ list_del(&winch->list);
+
+ if (winch->pid != -1)
+ os_kill_process(winch->pid, 1);
+ if (winch->fd != -1)
+ os_close_file(winch->fd);
+ if (winch->stack != 0)
+ free_stack(winch->stack, 0);
+ if (free_irq_ok)
+ free_irq(WINCH_IRQ, winch);
+ kfree(winch);
+}
+
static irqreturn_t winch_interrupt(int irq, void *data)
{
struct winch *winch = data;
@@ -767,12 +783,13 @@ static irqreturn_t winch_interrupt(int i
"errno = %d\n", -err);
printk("fd %d is losing SIGWINCH support\n",
winch->tty_fd);
+ free_winch(winch, 0);
return IRQ_HANDLED;
}
goto out;
}
}
- tty = winch->tty;
+ tty = winch->tty;
if (tty != NULL) {
line = tty->driver_data;
chan_window_size(&line->chan_list, &tty->winsize.ws_row,
@@ -785,43 +802,44 @@ static irqreturn_t winch_interrupt(int i
return IRQ_HANDLED;
}

-void register_winch_irq(int fd, int tty_fd, int pid, struct tty_struct *tty)
+void register_winch_irq(int fd, int tty_fd, int pid, struct tty_struct *tty,
+ unsigned long stack)
{
struct winch *winch;

winch = kmalloc(sizeof(*winch), GFP_KERNEL);
if (winch == NULL) {
printk("register_winch_irq - kmalloc failed\n");
- return;
+ goto cleanup;
}

*winch = ((struct winch) { .list = LIST_HEAD_INIT(winch->list),
.fd = fd,
.tty_fd = tty_fd,
.pid = pid,
- .tty = tty });
+ .tty = tty,
+ .stack = stack });
+
+ if (um_request_irq(WINCH_IRQ, fd, IRQ_READ, winch_interrupt,
+ IRQF_DISABLED | IRQF_SHARED | IRQF_SAMPLE_RANDOM,
+ "winch", winch) < 0) {
+ printk("register_winch_irq - failed to register IRQ\n");
+ goto out_free;
+ }

spin_lock(&winch_handler_lock);
list_add(&winch->list, &winch_handlers);
spin_unlock(&winch_handler_lock);

- if(um_request_irq(WINCH_IRQ, fd, IRQ_READ, winch_interrupt,
- IRQF_DISABLED | IRQF_SHARED | IRQF_SAMPLE_RANDOM,
- "winch", winch) < 0)
- printk("register_winch_irq - failed to register IRQ\n");
-}
-
-static void free_winch(struct winch *winch)
-{
- list_del(&winch->list);
-
- if(winch->pid != -1)
- os_kill_process(winch->pid, 1);
- if(winch->fd != -1)
- os_close_file(winch->fd);
+ return;

- free_irq(WINCH_IRQ, winch);
+ out_free:
kfree(winch);
+ cleanup:
+ os_kill_process(pid, 1);
+ os_close_file(fd);
+ if (stack != 0)
+ free_stack(stack, 0);
}

static void unregister_winch(struct tty_struct *tty)
@@ -834,7 +852,7 @@ static void unregister_winch(struct tty_
list_for_each(ele, &winch_handlers){
winch = list_entry(ele, struct winch, list);
if(winch->tty == tty){
- free_winch(winch);
+ free_winch(winch, 1);
break;
}
}
@@ -850,7 +868,7 @@ static void winch_cleanup(void)

list_for_each_safe(ele, next, &winch_handlers){
winch = list_entry(ele, struct winch, list);
- free_winch(winch);
+ free_winch(winch, 1);
}

spin_unlock(&winch_handler_lock);
Index: linux-2.6.21-mm/arch/um/os-Linux/skas/process.c
===================================================================
--- linux-2.6.21-mm.orig/arch/um/os-Linux/skas/process.c 2007-06-14 16:00:19.000000000 -0400
+++ linux-2.6.21-mm/arch/um/os-Linux/skas/process.c 2007-06-14 16:04:12.000000000 -0400
@@ -41,7 +41,7 @@ int is_skas_winch(int pid, int fd, void
if(pid != os_getpgrp())
return(0);

- register_winch_irq(-1, fd, -1, data);
+ register_winch_irq(-1, fd, -1, data, 0);
return(1);
}

Index: linux-2.6.21-mm/arch/um/include/chan_user.h
===================================================================
--- linux-2.6.21-mm.orig/arch/um/include/chan_user.h 2007-06-14 16:04:07.000000000 -0400
+++ linux-2.6.21-mm/arch/um/include/chan_user.h 2007-06-14 16:04:28.000000000 -0400
@@ -42,7 +42,8 @@ extern void generic_free(void *data);

struct tty_struct;
extern void register_winch(int fd, struct tty_struct *tty);
-extern void register_winch_irq(int fd, int tty_fd, int pid, struct tty_struct *tty);
+extern void register_winch_irq(int fd, int tty_fd, int pid,
+ struct tty_struct *tty, unsigned long stack);

#define __channel_help(fn, prefix) \
__uml_help(fn, prefix "[0-9]*=<channel description>\n" \
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/