[PATCH 3/3] Intel IXP4xx network drivers

From: Krzysztof Halasa
Date: Sun May 06 2007 - 20:08:25 EST

Next message: NeilBrown: "[PATCH 000 of 8] knfsd: Assorted bugfixes for 2.6.22"
Previous message: Krzysztof Halasa: "[PATCH 2/3] ARM: include IXP4xx "fuses" support"
In reply to: Krzysztof Halasa: "Re: [PATCH 2/3] ARM: include IXP4xx "fuses" support"
Next in thread: Michael-Luke Jones: "Re: [PATCH 3/3] Intel IXP4xx network drivers"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Adds IXP4xx drivers for built-in CPU components:
- hardware queue manager
- NPE (network coprocessors),
- Ethernet ports,
- HSS (sync serial) ports (currently only non-channelized HDLC).

Both Ethernet and HSS drivers use queue manager and NPE driver and
require external firmware file(s) available from www.intel.com.

"Platform device" definitions for Ethernet ports on IXDP425 development
platform are provided (though it has been tested on not yet available
IXP425-based hardware only)

Signed-off-by: Krzysztof Halasa <khc@xxxxxxxxx>

diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index 04b1d56..0dc497f 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -101,10 +101,35 @@ static struct platform_device ixdp425_uart = {
.resource = ixdp425_uart_resources
};

+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct mac_plat_info ixdp425_plat_mac[] = {
+ {
+ .phy = 0,
+ .rxq = 3,
+ }, {
+ .phy = 1,
+ .rxq = 4,
+ }
+};
+
+static struct platform_device ixdp425_mac[] = {
+ {
+ .name = "ixp4xx_eth",
+ .id = IXP4XX_ETH_NPEB,
+ .dev.platform_data = ixdp425_plat_mac,
+ }, {
+ .name = "ixp4xx_eth",
+ .id = IXP4XX_ETH_NPEC,
+ .dev.platform_data = ixdp425_plat_mac + 1,
+ }
+};
+
static struct platform_device *ixdp425_devices[] __initdata = {
&ixdp425_i2c_controller,
&ixdp425_flash,
- &ixdp425_uart
+ &ixdp425_uart,
+ &ixdp425_mac[0],
+ &ixdp425_mac[1],
};

static void __init ixdp425_init(void)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index a3d46ea..94dbfec 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1891,6 +1891,16 @@ config NE_H8300
source "drivers/net/fec_8xx/Kconfig"
source "drivers/net/fs_enet/Kconfig"

+config IXP4XX_ETH
+ tristate "IXP4xx Ethernet support"
+ depends on ARCH_IXP4XX
+ select IXP4XX_NPE
+ select IXP4XX_QMGR
+ select MII
+ help
+ Say Y here if you want to use built-in Ethernet ports
+ on IXP4xx processor.
+
endmenu

#
@@ -2924,6 +2934,30 @@ config NETCONSOLE
If you want to log kernel messages over the network, enable this.
See <file:Documentation/networking/netconsole.txt> for details.

+config IXP4XX_NETDEVICES
+ tristate
+ depends on ARCH_IXP4XX
+ help
+ Builds IXP4xx network devices
+
+config IXP4XX_NPE
+ tristate "IXP4xx Network Processor Engine support"
+ depends on ARCH_IXP4XX
+ select HOTPLUG
+ select FW_LOADER
+ select IXP4XX_NETDEVICES
+ help
+ This driver supports IXP4xx built-in network coprocessors
+ and is automatically selected by Ethernet and HSS drivers.
+
+config IXP4XX_QMGR
+ tristate "IXP4xx Queue Manager support"
+ depends on ARCH_IXP4XX
+ select IXP4XX_NETDEVICES
+ help
+ This driver supports IXP4xx built-in hardware queue manager
+ and is automatically selected by Ethernet and HSS drivers.
+
endif #NETDEVICES

config NETPOLL
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 33af833..a9bc474 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -212,6 +212,7 @@ obj-$(CONFIG_HAMRADIO) += hamradio/
obj-$(CONFIG_IRDA) += irda/
obj-$(CONFIG_ETRAX_ETHERNET) += cris/
obj-$(CONFIG_ENP2611_MSF_NET) += ixp2000/
+obj-$(CONFIG_IXP4XX_NETDEVICES) += ixp4xx/

obj-$(CONFIG_NETCONSOLE) += netconsole.o

diff --git a/drivers/net/ixp4xx/Makefile b/drivers/net/ixp4xx/Makefile
new file mode 100644
index 0000000..12e8351
--- /dev/null
+++ b/drivers/net/ixp4xx/Makefile
@@ -0,0 +1,4 @@
+obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
+obj-$(CONFIG_IXP4XX_NPE) += ixp4xx_npe.o
+obj-$(CONFIG_IXP4XX_ETH) += ixp4xx_eth.o
+obj-$(CONFIG_IXP4XX_HSS) += ixp4xx_hss.o
diff --git a/drivers/net/ixp4xx/ixp4xx_eth.c b/drivers/net/ixp4xx/ixp4xx_eth.c
new file mode 100644
index 0000000..92a654e
--- /dev/null
+++ b/drivers/net/ixp4xx/ixp4xx_eth.c
@@ -0,0 +1,1002 @@
+/*
+ * Intel IXP4xx Ethernet driver for Linux
+ *
+ * Copyright (C) 2007 Krzysztof Halasa <khc@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ *
+ * Ethernet port config (0x00 is not present on IXP42X):
+ *
+ * logical port 0x00 0x10 0x20
+ * NPE 0 (NPE-A) 1 (NPE-B) 2 (NPE-C)
+ * physical PortId 2 0 1
+ * TX queue 23 24 25
+ * RX-free queue 26 27 28
+ * TX-done queue is always 31, RX queue is configurable
+ */
+
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/kernel.h>
+#include <linux/mii.h>
+#include <linux/platform_device.h>
+#include <asm/io.h>
+#include "npe.h"
+#include "qmgr.h"
+
+#ifndef __ARMEB__
+#warning Little endian mode not supported
+#endif
+
+#define DEBUG_QUEUES 0
+#define DEBUG_RX 0
+#define DEBUG_TX 0
+#define DEBUG_PKT_BYTES 0
+#define DEBUG_MDIO 0
+
+#define DRV_NAME "ixp4xx_eth"
+#define DRV_VERSION "0.04"
+
+#define TX_QUEUE_LEN 16 /* dwords */
+#define PKT_DESCS 64 /* also length of queues: TX-done, RX-ready, RX */
+
+#define POOL_ALLOC_SIZE (sizeof(struct desc) * (PKT_DESCS))
+#define REGS_SIZE 0x1000
+#define MAX_MRU 1536
+
+#define MDIO_INTERVAL (3 * HZ)
+#define MAX_MDIO_RETRIES 100 /* microseconds, typically 30 cycles */
+
+#define NPE_ID(port) ((port)->id >> 4)
+#define PHYSICAL_ID(port) ((NPE_ID(port) + 2) % 3)
+#define TX_QUEUE(plat) (NPE_ID(port) + 23)
+#define RXFREE_QUEUE(plat) (NPE_ID(port) + 26)
+#define TXDONE_QUEUE 31
+
+/* TX Control Registers */
+#define TX_CNTRL0_TX_EN BIT(0)
+#define TX_CNTRL0_HALFDUPLEX BIT(1)
+#define TX_CNTRL0_RETRY BIT(2)
+#define TX_CNTRL0_PAD_EN BIT(3)
+#define TX_CNTRL0_APPEND_FCS BIT(4)
+#define TX_CNTRL0_2DEFER BIT(5)
+#define TX_CNTRL0_RMII BIT(6) /* reduced MII */
+#define TX_CNTRL1_RETRIES 0x0F /* 4 bits */
+
+/* RX Control Registers */
+#define RX_CNTRL0_RX_EN BIT(0)
+#define RX_CNTRL0_PADSTRIP_EN BIT(1)
+#define RX_CNTRL0_SEND_FCS BIT(2)
+#define RX_CNTRL0_PAUSE_EN BIT(3)
+#define RX_CNTRL0_LOOP_EN BIT(4)
+#define RX_CNTRL0_ADDR_FLTR_EN BIT(5)
+#define RX_CNTRL0_RX_RUNT_EN BIT(6)
+#define RX_CNTRL0_BCAST_DIS BIT(7)
+#define RX_CNTRL1_DEFER_EN BIT(0)
+
+/* Core Control Register */
+#define CORE_RESET BIT(0)
+#define CORE_RX_FIFO_FLUSH BIT(1)
+#define CORE_TX_FIFO_FLUSH BIT(2)
+#define CORE_SEND_JAM BIT(3)
+#define CORE_MDC_EN BIT(4) /* NPE-B ETH-0 only */
+
+/* Definitions for MII access routines */
+#define MII_CMD_GO BIT(31)
+#define MII_CMD_WRITE BIT(26)
+#define MII_STAT_READ_FAILED BIT(31)
+
+/* NPE message codes */
+#define NPE_GETSTATUS 0x00
+#define NPE_EDB_SETPORTADDRESS 0x01
+#define NPE_EDB_GETMACADDRESSDATABASE 0x02
+#define NPE_EDB_SETMACADDRESSSDATABASE 0x03
+#define NPE_GETSTATS 0x04
+#define NPE_RESETSTATS 0x05
+#define NPE_SETMAXFRAMELENGTHS 0x06
+#define NPE_VLAN_SETRXTAGMODE 0x07
+#define NPE_VLAN_SETDEFAULTRXVID 0x08
+#define NPE_VLAN_SETPORTVLANTABLEENTRY 0x09
+#define NPE_VLAN_SETPORTVLANTABLERANGE 0x0A
+#define NPE_VLAN_SETRXQOSENTRY 0x0B
+#define NPE_VLAN_SETPORTIDEXTRACTIONMODE 0x0C
+#define NPE_STP_SETBLOCKINGSTATE 0x0D
+#define NPE_FW_SETFIREWALLMODE 0x0E
+#define NPE_PC_SETFRAMECONTROLDURATIONID 0x0F
+#define NPE_PC_SETAPMACTABLE 0x11
+#define NPE_SETLOOPBACK_MODE 0x12
+#define NPE_PC_SETBSSIDTABLE 0x13
+#define NPE_ADDRESS_FILTER_CONFIG 0x14
+#define NPE_APPENDFCSCONFIG 0x15
+#define NPE_NOTIFY_MAC_RECOVERY_DONE 0x16
+#define NPE_MAC_RECOVERY_START 0x17
+
+
+struct eth_regs {
+ u32 tx_control[2], __res1[2]; /* 000 */
+ u32 rx_control[2], __res2[2]; /* 010 */
+ u32 random_seed, __res3[3]; /* 020 */
+ u32 partial_empty_threshold, __res4; /* 030 */
+ u32 partial_full_threshold, __res5; /* 038 */
+ u32 tx_start_bytes, __res6[3]; /* 040 */
+ u32 tx_deferral, rx_deferral,__res7[2]; /* 050 */
+ u32 tx_2part_deferral[2], __res8[2]; /* 060 */
+ u32 slot_time, __res9[3]; /* 070 */
+ u32 mdio_command[4]; /* 080 */
+ u32 mdio_status[4]; /* 090 */
+ u32 mcast_mask[6], __res10[2]; /* 0A0 */
+ u32 mcast_addr[6], __res11[2]; /* 0C0 */
+ u32 int_clock_threshold, __res12[3]; /* 0E0 */
+ u32 hw_addr[6], __res13[61]; /* 0F0 */
+ u32 core_control; /* 1FC */
+};
+
+struct port {
+ struct resource *mem_res;
+ struct eth_regs __iomem *regs;
+ struct npe *npe;
+ struct net_device *netdev;
+ struct net_device_stats stat;
+ struct mii_if_info mii;
+ struct delayed_work mdio_thread;
+ struct mac_plat_info *plat;
+ struct sk_buff *rx_skb_tab[PKT_DESCS];
+ struct desc *rx_desc_tab; /* coherent */
+ int id; /* logical port ID */
+ u32 rx_desc_tab_phys;
+ u32 msg_enable;
+};
+
+/* NPE message structure */
+struct msg {
+ union {
+ struct {
+ u8 cmd, eth_id, mac[ETH_ALEN];
+ };
+ struct {
+ u8 cmd, eth_id, __byte2, byte3;
+ u8 __byte4, byte5, __byte6, byte7;
+ };
+ struct {
+ u8 cmd, eth_id, __b2, byte3;
+ u32 data32;
+ };
+ };
+};
+
+/* Ethernet packet descriptor */
+struct desc {
+ u32 next; /* pointer to next buffer, unused */
+ u16 buf_len; /* buffer length */
+ u16 pkt_len; /* packet length */
+ u32 data; /* pointer to data buffer in RAM */
+ u8 dest_id;
+ u8 src_id;
+ u16 flags;
+ u8 qos;
+ u8 padlen;
+ u16 vlan_tci;
+ u8 dest_mac[ETH_ALEN];
+ u8 src_mac[ETH_ALEN];
+};
+
+
+#define rx_desc_phys(port, n) ((port)->rx_desc_tab_phys + \
+ (n) * sizeof(struct desc))
+#define tx_desc_phys(n) (tx_desc_tab_phys + (n) * sizeof(struct desc))
+
+static spinlock_t mdio_lock;
+static struct eth_regs __iomem *mdio_regs; /* mdio command and status only */
+static struct npe *mdio_npe;
+static int ports_open;
+static struct dma_pool *dma_pool;
+static struct sk_buff *tx_skb_tab[PKT_DESCS];
+static struct desc *tx_desc_tab; /* coherent */
+static u32 tx_desc_tab_phys;
+
+
+static inline void set_regbits(u32 bits, u32 __iomem *reg)
+{
+ __raw_writel(__raw_readl(reg) | bits, reg);
+}
+static inline void clr_regbits(u32 bits, u32 __iomem *reg)
+{
+ __raw_writel(__raw_readl(reg) & ~bits, reg);
+}
+
+
+static u16 mdio_cmd(struct net_device *dev, int phy_id, int location,
+ int write, u16 cmd)
+{
+ int cycles = 0;
+
+ if (__raw_readl(&mdio_regs->mdio_command[3]) & 0x80) {
+ printk("%s: MII not ready to transmit\n", dev->name);
+ return 0; /* not ready to transmit */
+ }
+
+ if (write) {
+ __raw_writel(cmd & 0xFF, &mdio_regs->mdio_command[0]);
+ __raw_writel(cmd >> 8, &mdio_regs->mdio_command[1]);
+ }
+ __raw_writel(((phy_id << 5) | location) & 0xFF,
+ &mdio_regs->mdio_command[2]);
+ __raw_writel((phy_id >> 3) | (write << 2) | 0x80 /* GO */,
+ &mdio_regs->mdio_command[3]);
+
+ while ((cycles < MAX_MDIO_RETRIES) &&
+ (__raw_readl(&mdio_regs->mdio_command[3]) & 0x80)) {
+ udelay(1);
+ cycles++;
+ }
+
+ if (cycles == MAX_MDIO_RETRIES) {
+ printk("%s: MII write failed\n", dev->name);
+ return 0;
+ }
+
+#if DEBUG_MDIO
+ printk(KERN_DEBUG "mdio_cmd() took %i cycles\n", cycles);
+#endif
+
+ if (write)
+ return 0;
+
+ if (__raw_readl(&mdio_regs->mdio_status[3]) & 0x80) {
+ printk("%s: MII read failed\n", dev->name);
+ return 0;
+ }
+
+ return (__raw_readl(&mdio_regs->mdio_status[0]) & 0xFF) |
+ (__raw_readl(&mdio_regs->mdio_status[1]) << 8);
+}
+
+static int mdio_read(struct net_device *dev, int phy_id, int location)
+{
+ unsigned long flags;
+ u16 val;
+
+ spin_lock_irqsave(&mdio_lock, flags);
+ val = mdio_cmd(dev, phy_id, location, 0, 0);
+ spin_unlock_irqrestore(&mdio_lock, flags);
+ return val;
+}
+
+static void mdio_write(struct net_device *dev, int phy_id, int location,
+ int val)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&mdio_lock, flags);
+ mdio_cmd(dev, phy_id, location, 1, val);
+ spin_unlock_irqrestore(&mdio_lock, flags);
+}
+
+static void eth_set_duplex(struct port *port)
+{
+ if (port->mii.full_duplex)
+ clr_regbits(TX_CNTRL0_HALFDUPLEX, &port->regs->tx_control[0]);
+ else
+ set_regbits(TX_CNTRL0_HALFDUPLEX, &port->regs->tx_control[0]);
+}
+
+
+static void mdio_thread(struct work_struct *work)
+{
+ struct port *port = container_of(work, struct port, mdio_thread.work);
+
+ if (mii_check_media(&port->mii, 1, 0))
+ eth_set_duplex(port);
+ schedule_delayed_work(&port->mdio_thread, MDIO_INTERVAL);
+}
+
+
+static inline void debug_skb(const char *func, struct sk_buff *skb)
+{
+#if DEBUG_PKT_BYTES
+ int i;
+
+ printk(KERN_DEBUG "%s(%i): ", func, skb->len);
+ for (i = 0; i < skb->len; i++) {
+ if (i >= DEBUG_PKT_BYTES)
+ break;
+ printk("%s%02X",
+ ((i == 6) || (i == 12) || (i >= 14)) ? " " : "",
+ skb->data[i]);
+ }
+ printk("\n");
+#endif
+}
+
+
+static inline void debug_desc(unsigned int queue, u32 desc_phys,
+ struct desc *desc, int is_get)
+{
+#if DEBUG_QUEUES
+ const char *op = is_get ? "->" : "<-";
+
+ if (!desc_phys) {
+ printk(KERN_DEBUG "queue %2i %s NULL\n", queue, op);
+ return;
+ }
+ printk(KERN_DEBUG "queue %2i %s %X: %X %3X %3X %08X %2X < %2X %4X %X"
+ " %X %X %02X%02X%02X%02X%02X%02X < %02X%02X%02X%02X%02X%02X\n",
+ queue, op, desc_phys, desc->next, desc->buf_len, desc->pkt_len,
+ desc->data, desc->dest_id, desc->src_id,
+ desc->flags, desc->qos,
+ desc->padlen, desc->vlan_tci,
+ desc->dest_mac[0], desc->dest_mac[1],
+ desc->dest_mac[2], desc->dest_mac[3],
+ desc->dest_mac[4], desc->dest_mac[5],
+ desc->src_mac[0], desc->src_mac[1],
+ desc->src_mac[2], desc->src_mac[3],
+ desc->src_mac[4], desc->src_mac[5]);
+#endif
+}
+
+static inline int queue_get_desc(unsigned int queue, struct port *port,
+ int is_tx)
+{
+ u32 phys, tab_phys, n_desc;
+ struct desc *tab;
+
+ if (!(phys = qmgr_get_entry(queue))) {
+ debug_desc(queue, phys, NULL, 1);
+ return -1;
+ }
+
+ phys &= ~0x1F; /* mask out non-address bits */
+ tab_phys = is_tx ? tx_desc_phys(0) : rx_desc_phys(port, 0);
+ tab = is_tx ? tx_desc_tab : port->rx_desc_tab;
+ n_desc = (phys - tab_phys) / sizeof(struct desc);
+ BUG_ON(n_desc >= PKT_DESCS);
+
+ debug_desc(queue, phys, &tab[n_desc], 1);
+ BUG_ON(tab[n_desc].next);
+ return n_desc;
+}
+
+static inline void queue_put_desc(unsigned int queue, u32 desc_phys,
+ struct desc *desc)
+{
+ debug_desc(queue, desc_phys, desc, 0);
+ BUG_ON(desc_phys & 0x1F);
+ qmgr_put_entry(queue, desc_phys);
+}
+
+
+static void eth_rx_irq(void *pdev)
+{
+ struct net_device *dev = pdev;
+ struct port *port = netdev_priv(dev);
+
+#if DEBUG_RX
+ printk(KERN_DEBUG "eth_rx_irq() start\n");
+#endif
+ qmgr_disable_irq(port->plat->rxq);
+ netif_rx_schedule(dev);
+}
+
+static int eth_poll(struct net_device *dev, int *budget)
+{
+ struct port *port = netdev_priv(dev);
+ unsigned int queue = port->plat->rxq;
+ int quota = dev->quota, received = 0;
+
+#if DEBUG_RX
+ printk(KERN_DEBUG "eth_poll() start\n");
+#endif
+ while (quota) {
+ struct sk_buff *old_skb, *new_skb;
+ struct desc *desc;
+ u32 data;
+ int n = queue_get_desc(queue, port, 0);
+ if (n < 0) { /* No packets received */
+ dev->quota -= received;
+ *budget -= received;
+ received = 0;
+ netif_rx_complete(dev);
+ qmgr_enable_irq(queue);
+ if (!qmgr_stat_empty(queue) &&
+ netif_rx_reschedule(dev, 0)) {
+ qmgr_disable_irq(queue);
+ continue;
+ }
+ return 0; /* all work done */
+ }
+
+ desc = &port->rx_desc_tab[n];
+
+ if ((new_skb = netdev_alloc_skb(dev, MAX_MRU)) != NULL) {
+#if 0
+ skb_reserve(new_skb, 2); /* FIXME */
+#endif
+ data = dma_map_single(&dev->dev, new_skb->data,
+ MAX_MRU, DMA_FROM_DEVICE);
+ }
+
+ if (!new_skb || dma_mapping_error(data)) {
+ if (new_skb)
+ dev_kfree_skb(new_skb);
+ port->stat.rx_dropped++;
+ /* put the desc back on RX-ready queue */
+ desc->buf_len = MAX_MRU;
+ desc->pkt_len = 0;
+ queue_put_desc(RXFREE_QUEUE(port->plat),
+ rx_desc_phys(port, n), desc);
+ BUG_ON(qmgr_stat_overflow(RXFREE_QUEUE(port->plat)));
+ continue;
+ }
+
+ /* process received skb */
+ old_skb = port->rx_skb_tab[n];
+ dma_unmap_single(&dev->dev, desc->data,
+ MAX_MRU, DMA_FROM_DEVICE);
+ skb_put(old_skb, desc->pkt_len);
+
+ debug_skb("eth_poll", old_skb);
+
+ old_skb->protocol = eth_type_trans(old_skb, dev);
+ dev->last_rx = jiffies;
+ port->stat.rx_packets++;
+ port->stat.rx_bytes += old_skb->len;
+ netif_receive_skb(old_skb);
+
+ /* put the new skb on RX-free queue */
+ port->rx_skb_tab[n] = new_skb;
+ desc->buf_len = MAX_MRU;
+ desc->pkt_len = 0;
+ desc->data = data;
+ queue_put_desc(RXFREE_QUEUE(port->plat),
+ rx_desc_phys(port, n), desc);
+ BUG_ON(qmgr_stat_overflow(RXFREE_QUEUE(port->plat)));
+ quota--;
+ received++;
+ }
+ dev->quota -= received;
+ *budget -= received;
+ return 1; /* not all work done */
+}
+
+static void eth_xmit_ready_irq(void *pdev)
+{
+ struct net_device *dev = pdev;
+
+#if DEBUG_TX
+ printk(KERN_DEBUG "eth_xmit_empty() start\n");
+#endif
+ netif_start_queue(dev);
+}
+
+static int eth_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct port *port = netdev_priv(dev);
+ struct desc *desc;
+ u32 phys;
+ struct sk_buff *old_skb;
+ int n;
+
+#if DEBUG_TX
+ printk(KERN_DEBUG "eth_xmit() start\n");
+#endif
+ if (unlikely(skb->len > MAX_MRU)) {
+ dev_kfree_skb(skb);
+ port->stat.tx_errors++;
+ return NETDEV_TX_OK;
+ }
+
+ n = queue_get_desc(TXDONE_QUEUE, port, 1);
+ BUG_ON(n < 0);
+ desc = &tx_desc_tab[n];
+ phys = tx_desc_phys(n);
+
+ if ((old_skb = tx_skb_tab[n]) != NULL) {
+ dma_unmap_single(&dev->dev, desc->data,
+ desc->buf_len, DMA_TO_DEVICE);
+ port->stat.tx_packets++;
+ port->stat.tx_bytes += old_skb->len;
+ dev_kfree_skb(old_skb);
+ }
+
+ /* disable VLAN functions in NPE image for now */
+ memset(desc, 0, sizeof(*desc));
+ desc->buf_len = desc->pkt_len = skb->len;
+ desc->data = dma_map_single(&dev->dev, skb->data,
+ skb->len, DMA_TO_DEVICE);
+ if (dma_mapping_error(desc->data)) {
+ desc->data = 0;
+ dev_kfree_skb(skb);
+ tx_skb_tab[n] = NULL;
+ port->stat.tx_dropped++;
+ /* put the desc back on TX-done queue */
+ queue_put_desc(TXDONE_QUEUE, phys, desc);
+ return 0;
+ }
+
+ tx_skb_tab[n] = skb;
+ debug_skb("eth_xmit", skb);
+
+ /* NPE firmware pads short frames with zeros internally */
+ wmb();
+ queue_put_desc(TX_QUEUE(port->plat), phys, desc);
+ BUG_ON(qmgr_stat_overflow(TX_QUEUE(port->plat)));
+ dev->trans_start = jiffies;
+
+ if (qmgr_stat_full(TX_QUEUE(port->plat))) {
+ netif_stop_queue(dev);
+ /* we could miss TX ready interrupt */
+ if (!qmgr_stat_full(TX_QUEUE(port->plat))) {
+ netif_start_queue(dev);
+ }
+ }
+
+#if DEBUG_TX
+ printk(KERN_DEBUG "eth_xmit() end\n");
+#endif
+ return NETDEV_TX_OK;
+}
+
+
+static struct net_device_stats *eth_stats(struct net_device *dev)
+{
+ struct port *port = netdev_priv(dev);
+ return &port->stat;
+}
+
+static void eth_set_mcast_list(struct net_device *dev)
+{
+ struct port *port = netdev_priv(dev);
+ struct dev_mc_list *mclist = dev->mc_list;
+ u8 diffs[ETH_ALEN], *addr;
+ int cnt = dev->mc_count, i;
+
+ if ((dev->flags & IFF_PROMISC) || !mclist || !cnt) {
+ clr_regbits(RX_CNTRL0_ADDR_FLTR_EN,
+ &port->regs->rx_control[0]);
+ return;
+ }
+
+ memset(diffs, 0, ETH_ALEN);
+ addr = mclist->dmi_addr; /* first MAC address */
+
+ while (--cnt && (mclist = mclist->next))
+ for (i = 0; i < ETH_ALEN; i++)
+ diffs[i] |= addr[i] ^ mclist->dmi_addr[i];
+
+ for (i = 0; i < ETH_ALEN; i++) {
+ __raw_writel(addr[i], &port->regs->mcast_addr[i]);
+ __raw_writel(~diffs[i], &port->regs->mcast_mask[i]);
+ }
+
+ set_regbits(RX_CNTRL0_ADDR_FLTR_EN, &port->regs->rx_control[0]);
+}
+
+
+static int eth_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
+{
+ struct port *port = netdev_priv(dev);
+ unsigned int duplex_chg;
+ int err;
+
+ if (!netif_running(dev))
+ return -EINVAL;
+ err = generic_mii_ioctl(&port->mii, if_mii(req), cmd, &duplex_chg);
+ if (duplex_chg)
+ eth_set_duplex(port);
+ return err;
+}
+
+
+static int request_queues(struct port *port)
+{
+ int err;
+
+ err = qmgr_request_queue(RXFREE_QUEUE(port->plat), PKT_DESCS, 0, 0);
+ if (err)
+ return err;
+
+ err = qmgr_request_queue(port->plat->rxq, PKT_DESCS, 0, 0);
+ if (err)
+ goto rel_rxfree;
+
+ err = qmgr_request_queue(TX_QUEUE(port->plat), TX_QUEUE_LEN, 0, 0);
+ if (err)
+ goto rel_rx;
+
+ /* TX-done queue handles skbs sent out by the NPEs */
+ if (!ports_open) {
+ err = qmgr_request_queue(TXDONE_QUEUE, PKT_DESCS, 0, 0);
+ if (err)
+ goto rel_tx;
+ }
+ return 0;
+
+rel_tx:
+ qmgr_release_queue(TX_QUEUE(port->plat));
+rel_rx:
+ qmgr_release_queue(port->plat->rxq);
+rel_rxfree:
+ qmgr_release_queue(RXFREE_QUEUE(port->plat));
+ return err;
+}
+
+static void release_queues(struct port *port)
+{
+ qmgr_release_queue(RXFREE_QUEUE(port->plat));
+ qmgr_release_queue(port->plat->rxq);
+ qmgr_release_queue(TX_QUEUE(port->plat));
+
+ if (!ports_open)
+ qmgr_release_queue(TXDONE_QUEUE);
+}
+
+static int init_queues(struct port *port)
+{
+ int i;
+
+ if (!dma_pool) {
+ /* Setup TX descriptors - common to all ports */
+ dma_pool = dma_pool_create(DRV_NAME, NULL, POOL_ALLOC_SIZE,
+ 32, 0);
+ if (!dma_pool)
+ return -ENOMEM;
+
+ if (!(tx_desc_tab = dma_pool_alloc(dma_pool, GFP_KERNEL,
+ &tx_desc_tab_phys)))
+ return -ENOMEM;
+ memset(tx_desc_tab, 0, POOL_ALLOC_SIZE);
+ memset(tx_skb_tab, 0, sizeof(tx_skb_tab)); /* static table */
+
+ for (i = 0; i < PKT_DESCS; i++) {
+ queue_put_desc(TXDONE_QUEUE, tx_desc_phys(i),
+ &tx_desc_tab[i]);
+ BUG_ON(qmgr_stat_overflow(TXDONE_QUEUE));
+ }
+ }
+
+ /* Setup RX buffers */
+ if (!(port->rx_desc_tab = dma_pool_alloc(dma_pool, GFP_KERNEL,
+ &port->rx_desc_tab_phys)))
+ return -ENOMEM;
+ memset(port->rx_desc_tab, 0, POOL_ALLOC_SIZE);
+ memset(port->rx_skb_tab, 0, sizeof(port->rx_skb_tab)); /* table */
+
+ for (i = 0; i < PKT_DESCS; i++) {
+ struct desc *desc = &port->rx_desc_tab[i];
+ struct sk_buff *skb;
+
+ if (!(skb = netdev_alloc_skb(port->netdev, MAX_MRU)))
+ return -ENOMEM;
+ port->rx_skb_tab[i] = skb;
+ desc->buf_len = MAX_MRU;
+#if 0
+ skb_reserve(skb, 2); /* FIXME */
+#endif
+ desc->data = dma_map_single(&port->netdev->dev, skb->data,
+ MAX_MRU, DMA_FROM_DEVICE);
+ if (dma_mapping_error(desc->data)) {
+ desc->data = 0;
+ return -EIO;
+ }
+ queue_put_desc(RXFREE_QUEUE(port->plat),
+ rx_desc_phys(port, i), desc);
+ BUG_ON(qmgr_stat_overflow(RXFREE_QUEUE(port->plat)));
+ }
+ return 0;
+}
+
+static void destroy_queues(struct port *port)
+{
+ int i;
+
+ while (queue_get_desc(RXFREE_QUEUE(port->plat), port, 0) >= 0)
+ /* nothing to do here */;
+ while (queue_get_desc(port->plat->rxq, port, 0) >= 0)
+ /* nothing to do here */;
+ while (queue_get_desc(TX_QUEUE(port->plat), port, 1) >= 0) {
+ /* nothing to do here */;
+ }
+ if (!ports_open)
+ while (queue_get_desc(TXDONE_QUEUE, port, 1) >= 0)
+ /* nothing to do here */;
+
+ if (port->rx_desc_tab) {
+ for (i = 0; i < PKT_DESCS; i++) {
+ struct desc *desc = &port->rx_desc_tab[i];
+ struct sk_buff *skb = port->rx_skb_tab[i];
+ if (skb) {
+ if (desc->data)
+ dma_unmap_single(&port->netdev->dev,
+ desc->data, MAX_MRU,
+ DMA_FROM_DEVICE);
+ dev_kfree_skb(skb);
+ }
+ }
+ dma_pool_free(dma_pool, port->rx_desc_tab,
+ port->rx_desc_tab_phys);
+ port->rx_desc_tab = NULL;
+ }
+
+ if (!ports_open && tx_desc_tab) {
+ for (i = 0; i < PKT_DESCS; i++) {
+ struct desc *desc = &tx_desc_tab[i];
+ struct sk_buff *skb = tx_skb_tab[i];
+ if (skb) {
+ if (desc->data)
+ dma_unmap_single(&port->netdev->dev,
+ desc->data,
+ desc->buf_len,
+ DMA_TO_DEVICE);
+ dev_kfree_skb(skb);
+ }
+ }
+ dma_pool_free(dma_pool, tx_desc_tab, tx_desc_tab_phys);
+ tx_desc_tab = NULL;
+ }
+ if (!ports_open && dma_pool) {
+ dma_pool_destroy(dma_pool);
+ dma_pool = NULL;
+ }
+}
+
+static int eth_load_firmware(struct net_device *dev, struct npe *npe)
+{
+ struct msg msg;
+ int err;
+
+ if ((err = npe_load_firmware(npe, npe_name(npe), &dev->dev)) != 0)
+ return err;
+
+ if ((err = npe_recv_message(npe, &msg, "ETH_GET_STATUS")) != 0) {
+ printk(KERN_ERR "%s: %s not responding\n", dev->name,
+ npe_name(npe));
+ return err;
+ }
+ return 0;
+}
+
+static int eth_open(struct net_device *dev)
+{
+ struct port *port = netdev_priv(dev);
+ struct npe *npe = port->npe;
+ struct msg msg;
+ int i, err;
+
+ if (!npe_running(npe))
+ if (eth_load_firmware(dev, npe))
+ return -EIO;
+
+ if (!npe_running(mdio_npe))
+ if (eth_load_firmware(dev, mdio_npe))
+ return -EIO;
+
+ memset(&msg, 0, sizeof(msg));
+ msg.cmd = NPE_VLAN_SETRXQOSENTRY;
+ msg.eth_id = port->id;
+ msg.byte5 = port->plat->rxq | 0x80;
+ msg.byte7 = port->plat->rxq << 4;
+ for (i = 0; i < 8; i++) {
+ msg.byte3 = i;
+ if (npe_send_recv_message(port->npe, &msg, "ETH_SET_RXQ"))
+ return -EIO;
+ }
+
+ msg.cmd = NPE_EDB_SETPORTADDRESS;
+ msg.eth_id = PHYSICAL_ID(port);
+ memcpy(msg.mac, dev->dev_addr, ETH_ALEN);
+ if (npe_send_recv_message(port->npe, &msg, "ETH_SET_MAC"))
+ return -EIO;
+
+ memset(&msg, 0, sizeof(msg));
+ msg.cmd = NPE_FW_SETFIREWALLMODE;
+ msg.eth_id = port->id;
+ if (npe_send_recv_message(port->npe, &msg, "ETH_SET_FIREWALL_MODE"))
+ return -EIO;
+
+ if ((err = request_queues(port)) != 0)
+ return err;
+
+ if ((err = init_queues(port)) != 0) {
+ destroy_queues(port);
+ release_queues(port);
+ return err;
+ }
+
+ for (i = 0; i < ETH_ALEN; i++)
+ __raw_writel(dev->dev_addr[i], &port->regs->hw_addr[i]);
+ __raw_writel(0x08, &port->regs->random_seed);
+ __raw_writel(0x12, &port->regs->partial_empty_threshold);
+ __raw_writel(0x30, &port->regs->partial_full_threshold);
+ __raw_writel(0x08, &port->regs->tx_start_bytes);
+ __raw_writel(0x15, &port->regs->tx_deferral);
+ __raw_writel(0x08, &port->regs->tx_2part_deferral[0]);
+ __raw_writel(0x07, &port->regs->tx_2part_deferral[1]);
+ __raw_writel(0x80, &port->regs->slot_time);
+ __raw_writel(0x01, &port->regs->int_clock_threshold);
+ __raw_writel(TX_CNTRL1_RETRIES, &port->regs->tx_control[1]);
+ __raw_writel(TX_CNTRL0_TX_EN | TX_CNTRL0_RETRY | TX_CNTRL0_PAD_EN |
+ TX_CNTRL0_APPEND_FCS | TX_CNTRL0_2DEFER,
+ &port->regs->tx_control[0]);
+ __raw_writel(0, &port->regs->rx_control[1]);
+ __raw_writel(RX_CNTRL0_RX_EN | RX_CNTRL0_PADSTRIP_EN,
+ &port->regs->rx_control[0]);
+
+ if (mii_check_media(&port->mii, 1, 1))
+ eth_set_duplex(port);
+ eth_set_mcast_list(dev);
+ netif_start_queue(dev);
+ schedule_delayed_work(&port->mdio_thread, MDIO_INTERVAL);
+
+ qmgr_set_irq(port->plat->rxq, QUEUE_IRQ_SRC_NOT_EMPTY,
+ eth_rx_irq, dev);
+ qmgr_set_irq(TX_QUEUE(port->plat), QUEUE_IRQ_SRC_NOT_FULL,
+ eth_xmit_ready_irq, dev);
+ qmgr_enable_irq(port->plat->rxq);
+ qmgr_enable_irq(TX_QUEUE(port->plat));
+ ports_open++;
+ return 0;
+}
+
+static int eth_close(struct net_device *dev)
+{
+ struct port *port = netdev_priv(dev);
+
+ ports_open--;
+ qmgr_disable_irq(port->plat->rxq);
+ qmgr_disable_irq(TX_QUEUE(port->plat));
+ netif_stop_queue(dev);
+
+ clr_regbits(RX_CNTRL0_RX_EN, &port->regs->rx_control[0]);
+ clr_regbits(TX_CNTRL0_TX_EN, &port->regs->tx_control[0]);
+ set_regbits(CORE_RESET | CORE_RX_FIFO_FLUSH | CORE_TX_FIFO_FLUSH,
+ &port->regs->core_control);
+ udelay(10);
+ clr_regbits(CORE_RESET | CORE_RX_FIFO_FLUSH | CORE_TX_FIFO_FLUSH,
+ &port->regs->core_control);
+
+ cancel_rearming_delayed_work(&port->mdio_thread);
+ destroy_queues(port);
+ release_queues(port);
+ return 0;
+}
+
+static int __devinit eth_init_one(struct platform_device *pdev)
+{
+ struct port *port;
+ struct net_device *dev;
+ struct mac_plat_info *plat = pdev->dev.platform_data;
+ u32 regs_phys;
+ int err;
+
+ if (!(dev = alloc_etherdev(sizeof(struct port))))
+ return -ENOMEM;
+
+ SET_MODULE_OWNER(dev);
+ SET_NETDEV_DEV(dev, &pdev->dev);
+ port = netdev_priv(dev);
+ port->netdev = dev;
+ port->id = pdev->id;
+
+ switch (port->id) {
+ case IXP4XX_ETH_NPEA:
+ port->regs = (struct eth_regs __iomem *)IXP4XX_EthA_BASE_VIRT;
+ regs_phys = IXP4XX_EthA_BASE_PHYS;
+ break;
+ case IXP4XX_ETH_NPEB:
+ port->regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT;
+ regs_phys = IXP4XX_EthB_BASE_PHYS;
+ break;
+ case IXP4XX_ETH_NPEC:
+ port->regs = (struct eth_regs __iomem *)IXP4XX_EthC_BASE_VIRT;
+ regs_phys = IXP4XX_EthC_BASE_PHYS;
+ break;
+ default:
+ err = -ENOSYS;
+ goto err_free;
+ }
+
+ dev->open = eth_open;
+ dev->hard_start_xmit = eth_xmit;
+ dev->poll = eth_poll;
+ dev->stop = eth_close;
+ dev->get_stats = eth_stats;
+ dev->do_ioctl = eth_ioctl;
+ dev->set_multicast_list = eth_set_mcast_list;
+ dev->weight = 16;
+ dev->tx_queue_len = 100;
+
+ if (!(port->npe = npe_request(NPE_ID(port)))) {
+ err = -EIO;
+ goto err_free;
+ }
+
+ if (register_netdev(dev)) {
+ err = -EIO;
+ goto err_npe_rel;
+ }
+
+ port->mem_res = request_mem_region(regs_phys, REGS_SIZE, dev->name);
+ if (!port->mem_res) {
+ err = -EBUSY;
+ goto err_unreg;
+ }
+
+ port->plat = plat;
+ memcpy(dev->dev_addr, plat->hwaddr, ETH_ALEN);
+
+ platform_set_drvdata(pdev, dev);
+
+ __raw_writel(CORE_RESET, &port->regs->core_control);
+ udelay(50);
+ __raw_writel(CORE_MDC_EN, &port->regs->core_control);
+ udelay(50);
+
+ port->mii.dev = dev;
+ port->mii.mdio_read = mdio_read;
+ port->mii.mdio_write = mdio_write;
+ port->mii.phy_id = plat->phy;
+ port->mii.phy_id_mask = 0x1F;
+ port->mii.reg_num_mask = 0x1F;
+
+ INIT_DELAYED_WORK(&port->mdio_thread, mdio_thread);
+
+ printk(KERN_INFO "%s: MII PHY %i on %s\n", dev->name, plat->phy,
+ npe_name(port->npe));
+ return 0;
+
+err_unreg:
+ unregister_netdev(dev);
+err_npe_rel:
+ npe_release(port->npe);
+err_free:
+ free_netdev(dev);
+ return err;
+}
+
+static int __devexit eth_remove_one(struct platform_device *pdev)
+{
+ struct net_device *dev = platform_get_drvdata(pdev);
+ struct port *port = netdev_priv(dev);
+
+ unregister_netdev(dev);
+ platform_set_drvdata(pdev, NULL);
+ npe_release(port->npe);
+ release_resource(port->mem_res);
+ free_netdev(dev);
+ return 0;
+}
+
+static struct platform_driver drv = {
+ .driver.name = DRV_NAME,
+ .probe = eth_init_one,
+ .remove = eth_remove_one,
+};
+
+static int __init eth_init_module(void)
+{
+ if (!(ixp4xx_read_fuses() & IXP4XX_FUSE_NPEB_ETH0))
+ return -ENOSYS;
+
+ /* All MII PHY accesses use NPE-B Ethernet registers */
+ if (!(mdio_npe = npe_request(1)))
+ return -EIO;
+ spin_lock_init(&mdio_lock);
+ mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT;
+
+ return platform_driver_register(&drv);
+}
+
+static void __exit eth_cleanup_module(void)
+{
+ platform_driver_unregister(&drv);
+ npe_release(mdio_npe);
+}
+
+MODULE_AUTHOR("Krzysztof Halasa");
+MODULE_DESCRIPTION("Intel IXP4xx Ethernet driver");
+MODULE_LICENSE("GPL v2");
+module_init(eth_init_module);
+module_exit(eth_cleanup_module);
diff --git a/drivers/net/ixp4xx/ixp4xx_hss.c b/drivers/net/ixp4xx/ixp4xx_hss.c
new file mode 100644
index 0000000..cbd96d5
--- /dev/null
+++ b/drivers/net/ixp4xx/ixp4xx_hss.c
@@ -0,0 +1,1048 @@
+/*
+ * Intel IXP4xx HSS (synchronous serial port) driver for Linux
+ *
+ * Copyright (C) 2007 Krzysztof Halasa <khc@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/kernel.h>
+#include <linux/hdlc.h>
+#include <linux/platform_device.h>
+#include <asm/io.h>
+#include "npe.h"
+#include "qmgr.h"
+
+#ifndef __ARMEB__
+#warning Little endian mode not supported
+#endif
+
+#define DEBUG_QUEUES 0
+#define DEBUG_RX 0
+#define DEBUG_TX 0
+
+#define DRV_NAME "ixp4xx_hss"
+#define DRV_VERSION "0.03"
+
+#define PKT_EXTRA_FLAGS 0 /* orig 1 */
+#define FRAME_SYNC_OFFSET 0 /* unused, channelized only */
+#define FRAME_SYNC_SIZE 1024
+#define PKT_NUM_PIPES 1 /* 1, 2 or 4 */
+#define PKT_PIPE_FIFO_SIZEW 4 /* total 4 dwords per HSS */
+
+#define RX_DESCS 16 /* also length of queues: RX-ready, RX */
+#define TX_DESCS 16 /* also length of queues: TX-done, TX */
+
+#define POOL_ALLOC_SIZE (sizeof(struct desc) * (RX_DESCS + TX_DESCS))
+#define RX_SIZE (HDLC_MAX_MRU + 4) /* NPE needs more space */
+
+/* Queue IDs */
+#define HSS0_CHL_RXTRIG_QUEUE 12 /* orig size = 32 dwords */
+#define HSS0_PKT_RX_QUEUE 13 /* orig size = 32 dwords */
+#define HSS0_PKT_TX0_QUEUE 14 /* orig size = 16 dwords */
+#define HSS0_PKT_TX1_QUEUE 15
+#define HSS0_PKT_TX2_QUEUE 16
+#define HSS0_PKT_TX3_QUEUE 17
+#define HSS0_PKT_RXFREE0_QUEUE 18 /* orig size = 16 dwords */
+#define HSS0_PKT_RXFREE1_QUEUE 19
+#define HSS0_PKT_RXFREE2_QUEUE 20
+#define HSS0_PKT_RXFREE3_QUEUE 21
+#define HSS0_PKT_TXDONE_QUEUE 22 /* orig size = 64 dwords */
+
+#define HSS1_CHL_RXTRIG_QUEUE 10
+#define HSS1_PKT_RX_QUEUE 0
+#define HSS1_PKT_TX0_QUEUE 5
+#define HSS1_PKT_TX1_QUEUE 6
+#define HSS1_PKT_TX2_QUEUE 7
+#define HSS1_PKT_TX3_QUEUE 8
+#define HSS1_PKT_RXFREE0_QUEUE 1
+#define HSS1_PKT_RXFREE1_QUEUE 2
+#define HSS1_PKT_RXFREE2_QUEUE 3
+#define HSS1_PKT_RXFREE3_QUEUE 4
+#define HSS1_PKT_TXDONE_QUEUE 9
+
+#define NPE_PKT_MODE_HDLC 0
+#define NPE_PKT_MODE_RAW 1
+#define NPE_PKT_MODE_56KMODE 2
+#define NPE_PKT_MODE_56KENDIAN_MSB 4
+
+/* PKT_PIPE_HDLC_CFG_WRITE flags */
+#define PKT_HDLC_IDLE_ONES 0x1 /* default = flags */
+#define PKT_HDLC_CRC_32 0x2 /* default = CRC-16 */
+#define PKT_HDLC_MSB_ENDIAN 0x4 /* default = LE */
+
+
+/* hss_config, PCRs */
+/* Frame sync sampling, default = active low */
+#define PCR_FRM_SYNC_ACTIVE_HIGH 0x40000000
+#define PCR_FRM_SYNC_FALLINGEDGE 0x80000000
+#define PCR_FRM_SYNC_RISINGEDGE 0xC0000000
+
+/* Frame sync pin: input (default) or output generated off a given clk edge */
+#define PCR_FRM_SYNC_OUTPUT_FALLING 0x20000000
+#define PCR_FRM_SYNC_OUTPUT_RISING 0x30000000
+
+/* Frame and data clock sampling on edge, default = falling */
+#define PCR_FCLK_EDGE_RISING 0x08000000
+#define PCR_DCLK_EDGE_RISING 0x04000000
+
+/* Clock direction, default = input */
+#define PCR_SYNC_CLK_DIR_OUTPUT 0x02000000
+
+/* Generate/Receive frame pulses, default = enabled */
+#define PCR_FRM_PULSE_DISABLED 0x01000000
+
+ /* Data rate is full (default) or half the configured clk speed */
+#define PCR_HALF_CLK_RATE 0x00200000
+
+/* Invert data between NPE and HSS FIFOs? (default = no) */
+#define PCR_DATA_POLARITY_INVERT 0x00100000
+
+/* TX/RX endianness, default = LSB */
+#define PCR_MSB_ENDIAN 0x00080000
+
+/* Normal (default) / open drain mode (TX only) */
+#define PCR_TX_PINS_OPEN_DRAIN 0x00040000
+
+/* No framing bit transmitted and expected on RX? (default = framing bit) */
+#define PCR_SOF_NO_FBIT 0x00020000
+
+/* Drive data pins? */
+#define PCR_TX_DATA_ENABLE 0x00010000
+
+/* Voice 56k type: drive the data pins low (default), high, high Z */
+#define PCR_TX_V56K_HIGH 0x00002000
+#define PCR_TX_V56K_HIGH_IMP 0x00004000
+
+/* Unassigned type: drive the data pins low (default), high, high Z */
+#define PCR_TX_UNASS_HIGH 0x00000800
+#define PCR_TX_UNASS_HIGH_IMP 0x00001000
+
+/* T1 @ 1.544MHz only: Fbit dictated in FIFO (default) or high Z */
+#define PCR_TX_FB_HIGH_IMP 0x00000400
+
+/* 56k data endiannes - which bit unused: high (default) or low */
+#define PCR_TX_56KE_BIT_0_UNUSED 0x00000200
+
+/* 56k data transmission type: 32/8 bit data (default) or 56K data */
+#define PCR_TX_56KS_56K_DATA 0x00000100
+
+/* hss_config, cCR */
+/* Number of packetized clients, default = 1 */
+#define CCR_NPE_HFIFO_2_HDLC 0x04000000
+#define CCR_NPE_HFIFO_3_OR_4HDLC 0x08000000
+
+/* default = no loopback */
+#define CCR_LOOPBACK 0x02000000
+
+/* HSS number, default = 0 (first) */
+#define CCR_SECOND_HSS 0x01000000
+
+
+/* hss_config, clkCR: main:10, num:10, denom:12 */
+#define CLK42X_SPEED_EXP ((0x3FF << 22) | ( 2 << 12) | 15) /*65 KHz*/
+
+#define CLK42X_SPEED_512KHZ (( 130 << 22) | ( 2 << 12) | 15)
+#define CLK42X_SPEED_1536KHZ (( 43 << 22) | ( 18 << 12) | 47)
+#define CLK42X_SPEED_1544KHZ (( 43 << 22) | ( 33 << 12) | 192)
+#define CLK42X_SPEED_2048KHZ (( 32 << 22) | ( 34 << 12) | 63)
+#define CLK42X_SPEED_4096KHZ (( 16 << 22) | ( 34 << 12) | 127)
+#define CLK42X_SPEED_8192KHZ (( 8 << 22) | ( 34 << 12) | 255)
+
+#define CLK46X_SPEED_512KHZ (( 130 << 22) | ( 24 << 12) | 127)
+#define CLK46X_SPEED_1536KHZ (( 43 << 22) | (152 << 12) | 383)
+#define CLK46X_SPEED_1544KHZ (( 43 << 22) | ( 66 << 12) | 385)
+#define CLK46X_SPEED_2048KHZ (( 32 << 22) | (280 << 12) | 511)
+#define CLK46X_SPEED_4096KHZ (( 16 << 22) | (280 << 12) | 1023)
+#define CLK46X_SPEED_8192KHZ (( 8 << 22) | (280 << 12) | 2047)
+
+
+/* hss_config, LUTs: default = unassigned */
+#define TDMMAP_HDLC 1 /* HDLC - packetised */
+#define TDMMAP_VOICE56K 2 /* Voice56K - channelised */
+#define TDMMAP_VOICE64K 3 /* Voice64K - channelised */
+
+
+/* NPE command codes */
+/* writes the ConfigWord value to the location specified by offset */
+#define PORT_CONFIG_WRITE 0x40
+
+/* triggers the NPE to load the contents of the configuration table */
+#define PORT_CONFIG_LOAD 0x41
+
+/* triggers the NPE to return an HssErrorReadResponse message */
+#define PORT_ERROR_READ 0x42
+
+/* reset NPE internal status and enable the HssChannelized operation */
+#define CHAN_FLOW_ENABLE 0x43
+#define CHAN_FLOW_DISABLE 0x44
+#define CHAN_IDLE_PATTERN_WRITE 0x45
+#define CHAN_NUM_CHANS_WRITE 0x46
+#define CHAN_RX_BUF_ADDR_WRITE 0x47
+#define CHAN_RX_BUF_CFG_WRITE 0x48
+#define CHAN_TX_BLK_CFG_WRITE 0x49
+#define CHAN_TX_BUF_ADDR_WRITE 0x4A
+#define CHAN_TX_BUF_SIZE_WRITE 0x4B
+#define CHAN_TSLOTSWITCH_ENABLE 0x4C
+#define CHAN_TSLOTSWITCH_DISABLE 0x4D
+
+/* downloads the gainWord value for a timeslot switching channel associated
+ with bypassNum */
+#define CHAN_TSLOTSWITCH_GCT_DOWNLOAD 0x4E
+
+/* triggers the NPE to reset internal status and enable the HssPacketized
+ operation for the flow specified by pPipe */
+#define PKT_PIPE_FLOW_ENABLE 0x50
+#define PKT_PIPE_FLOW_DISABLE 0x51
+#define PKT_NUM_PIPES_WRITE 0x52
+#define PKT_PIPE_FIFO_SIZEW_WRITE 0x53
+#define PKT_PIPE_HDLC_CFG_WRITE 0x54
+#define PKT_PIPE_IDLE_PATTERN_WRITE 0x55
+#define PKT_PIPE_RX_SIZE_WRITE 0x56
+#define PKT_PIPE_MODE_WRITE 0x57
+
+
+#define HSS_TIMESLOTS 128
+#define HSS_LUT_BITS 2
+
+/* HDLC packet status values - desc->status */
+#define ERR_SHUTDOWN 1 /* stop or shutdown occurrance */
+#define ERR_HDLC_ALIGN 2 /* HDLC alignment error */
+#define ERR_HDLC_FCS 3 /* HDLC Frame Check Sum error */
+#define ERR_RXFREE_Q_EMPTY 4 /* RX-free queue became empty while receiving
+ this packet (if buf_len < pkt_len) */
+#define ERR_HDLC_TOO_LONG 5 /* HDLC frame size too long */
+#define ERR_HDLC_ABORT 6 /* abort sequence received */
+#define ERR_DISCONNECTING 7 /* disconnect is in progress */
+
+
+struct port {
+ struct npe *npe;
+ struct net_device *netdev;
+ struct hss_plat_info *plat;
+ struct sk_buff *rx_skb_tab[RX_DESCS], *tx_skb_tab[TX_DESCS];
+ struct desc *desc_tab; /* coherent */
+ u32 desc_tab_phys;
+ sync_serial_settings settings;
+ int id;
+ u8 hdlc_cfg;
+};
+
+/* NPE message structure */
+struct msg {
+ u8 cmd, unused, hss_port, index;
+ union {
+ u8 data8[4];
+ u16 data16[2];
+ u32 data32;
+ };
+};
+
+
+/* HDLC packet descriptor */
+struct desc {
+ u32 next; /* pointer to next buffer, unused */
+ u16 buf_len; /* buffer length */
+ u16 pkt_len; /* packet length */
+ u32 data; /* pointer to data buffer in RAM */
+ u8 status;
+ u8 error_count;
+ u16 __reserved;
+ u32 __reserved1[4];
+};
+
+#define rx_desc_ptr(port, n) (&(port)->desc_tab[n])
+#define rx_desc_phys(port, n) ((port)->desc_tab_phys + \
+ (n) * sizeof(struct desc))
+#define tx_desc_ptr(port, n) (&(port)->desc_tab[(n) + RX_DESCS])
+#define tx_desc_phys(port, n) ((port)->desc_tab_phys + \
+ ((n) + RX_DESCS) * sizeof(struct desc))
+
+static int ports_open;
+static struct dma_pool *dma_pool;
+
+static struct {
+ int tx, txdone, rx, rxfree;
+}queue_ids[2] = {{ HSS0_PKT_TX0_QUEUE, HSS0_PKT_TXDONE_QUEUE,
+ HSS0_PKT_RX_QUEUE, HSS0_PKT_RXFREE0_QUEUE },
+ { HSS1_PKT_TX0_QUEUE, HSS1_PKT_TXDONE_QUEUE,
+ HSS1_PKT_RX_QUEUE, HSS1_PKT_RXFREE0_QUEUE },
+};
+
+
+static inline struct port* dev_to_port(struct net_device *dev)
+{
+ return dev_to_hdlc(dev)->priv;
+}
+
+
+static inline void debug_desc(unsigned int queue, u32 desc_phys,
+ struct desc *desc, int is_get)
+{
+#if DEBUG_QUEUES
+ const char *op = is_get ? "->" : "<-";
+
+ if (!desc_phys) {
+ printk(KERN_DEBUG "queue %2i %s NULL\n", queue, op);
+ return;
+ }
+ printk(KERN_DEBUG "queue %2i %s %X: %X %3X %3X %08X %X %X\n",
+ queue, op, desc_phys, desc->next, desc->buf_len, desc->pkt_len,
+ desc->data, desc->status, desc->error_count);
+#endif
+}
+
+static inline int queue_get_desc(unsigned int queue, struct port *port,
+ int is_tx)
+{
+ u32 phys, tab_phys, n_desc;
+ struct desc *tab;
+
+ if (!(phys = qmgr_get_entry(queue))) {
+ debug_desc(queue, phys, NULL, 1);
+ return -1;
+ }
+
+ BUG_ON(phys & 0x1F);
+ tab_phys = is_tx ? tx_desc_phys(port, 0) : rx_desc_phys(port, 0);
+ tab = is_tx ? tx_desc_ptr(port, 0) : rx_desc_ptr(port, 0);
+ n_desc = (phys - tab_phys) / sizeof(struct desc);
+ BUG_ON(n_desc >= (is_tx ? TX_DESCS : RX_DESCS));
+
+ debug_desc(queue, phys, &tab[n_desc], 1);
+ BUG_ON(tab[n_desc].next);
+ return n_desc;
+}
+
+static inline void queue_put_desc(unsigned int queue, u32 desc_phys,
+ struct desc *desc)
+{
+ debug_desc(queue, desc_phys, desc, 0);
+ BUG_ON(desc_phys & 0x1F);
+ qmgr_put_entry(queue, desc_phys);
+}
+
+
+static void hss_set_carrier(void *pdev, int carrier)
+{
+ struct net_device *dev = pdev;
+ if (carrier)
+ netif_carrier_on(dev);
+ else
+ netif_carrier_off(dev);
+}
+
+static void hss_rx_irq(void *pdev)
+{
+ struct net_device *dev = pdev;
+ struct port *port = dev_to_port(dev);
+
+#if DEBUG_RX
+ printk(KERN_DEBUG "hss_rx_irq() start\n");
+#endif
+ qmgr_disable_irq(queue_ids[port->id].rx);
+ netif_rx_schedule(dev);
+}
+
+static int hss_poll(struct net_device *dev, int *budget)
+{
+ struct port *port = dev_to_port(dev);
+ unsigned int queue = queue_ids[port->id].rx;
+ struct net_device_stats *stats = hdlc_stats(dev);
+ int quota = dev->quota, received = 0;
+
+#if DEBUG_RX
+ printk(KERN_DEBUG "hss_poll() start\n");
+#endif
+ while (quota) {
+ struct sk_buff *old_skb, *new_skb = NULL;
+ struct desc *desc;
+ u32 data;
+ int n = queue_get_desc(queue, port, 0);
+ if (n < 0) { /* No packets received */
+ dev->quota -= received;
+ *budget -= received;
+ received = 0;
+#if DEBUG_RX
+ printk(KERN_DEBUG "hss_poll() netif_rx_complete()\n");
+#endif
+ netif_rx_complete(dev);
+ qmgr_enable_irq(queue);
+ if (!qmgr_stat_empty(queue) &&
+ netif_rx_reschedule(dev, 0)) {
+#if DEBUG_RX
+ printk(KERN_DEBUG "hss_poll()"
+ " netif_rx_reschedule() successed\n");
+#endif
+ qmgr_disable_irq(queue);
+ continue;
+ }
+#if DEBUG_RX
+ printk(KERN_DEBUG "hss_poll() all done\n");
+#endif
+ return 0; /* all work done */
+ }
+
+ desc = rx_desc_ptr(port, n);
+
+ if (!desc->status) /* check for RX errors */
+ new_skb = netdev_alloc_skb(dev, RX_SIZE);
+ if (new_skb)
+ data = dma_map_single(&dev->dev, new_skb->data,
+ RX_SIZE, DMA_FROM_DEVICE);
+
+ if (!new_skb || dma_mapping_error(data)) {
+ if (new_skb)
+ dev_kfree_skb(new_skb);
+ switch (desc->status) {
+ case 0:
+ stats->rx_dropped++;
+ break;
+ case ERR_HDLC_ALIGN:
+ case ERR_HDLC_ABORT:
+ stats->rx_frame_errors++;
+ stats->rx_errors++;
+ break;
+ case ERR_HDLC_FCS:
+ stats->rx_crc_errors++;
+ stats->rx_errors++;
+ break;
+ case ERR_HDLC_TOO_LONG:
+ stats->rx_length_errors++;
+ stats->rx_errors++;
+ break;
+ default: /* FIXME - remove printk */
+ printk(KERN_ERR "hss_poll(): status 0x%02X"
+ " errors %u\n", desc->status,
+ desc->error_count);
+ stats->rx_errors++;
+ }
+ /* put the desc back on RX-ready queue */
+ desc->buf_len = RX_SIZE;
+ desc->pkt_len = desc->status = 0;
+ queue_put_desc(queue_ids[port->id].rxfree,
+ rx_desc_phys(port, n), desc);
+ BUG_ON(qmgr_stat_overflow(queue_ids[port->id].rxfree));
+ continue;
+ }
+
+ if (desc->error_count) /* FIXME - remove printk */
+ printk(KERN_ERR "hss_poll(): status 0x%02X"
+ " errors %u\n", desc->status,
+ desc->error_count);
+
+ /* process received skb */
+ old_skb = port->rx_skb_tab[n];
+ dma_unmap_single(&dev->dev, desc->data,
+ RX_SIZE, DMA_FROM_DEVICE);
+
+ skb_put(old_skb, desc->pkt_len);
+ old_skb->protocol = hdlc_type_trans(old_skb, dev);
+ dev->last_rx = jiffies;
+ stats->rx_packets++;
+ stats->rx_bytes += old_skb->len;
+ netif_receive_skb(old_skb);
+
+ /* put the new skb on RX-free queue */
+ port->rx_skb_tab[n] = new_skb;
+ desc->buf_len = RX_SIZE;
+ desc->pkt_len = 0;
+ desc->data = data;
+ queue_put_desc(queue_ids[port->id].rxfree,
+ rx_desc_phys(port, n), desc);
+ BUG_ON(qmgr_stat_overflow(queue_ids[port->id].rxfree));
+ quota--;
+ received++;
+ }
+ dev->quota -= received;
+ *budget -= received;
+#if DEBUG_RX
+ printk(KERN_DEBUG "hss_poll() end, not all work done\n");
+#endif
+ return 1; /* not all work done */
+}
+
+static void hss_xmit_ready_irq(void *pdev)
+{
+ struct net_device *dev = pdev;
+
+#if DEBUG_TX
+ printk(KERN_DEBUG "hss_xmit_empty() start\n");
+#endif
+ netif_start_queue(dev);
+
+#if DEBUG_TX
+ printk(KERN_DEBUG "hss_xmit_empty() end\n");
+#endif
+}
+
+static int hss_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct port *port = dev_to_port(dev);
+ struct net_device_stats *stats = hdlc_stats(dev);
+ struct desc *desc;
+ u32 phys;
+ struct sk_buff *old_skb;
+ int n;
+
+#if DEBUG_TX
+ printk(KERN_DEBUG "hss_xmit() start\n");
+#endif
+ if (unlikely(skb->len > HDLC_MAX_MRU)) {
+ dev_kfree_skb(skb);
+ stats->tx_errors++;
+ return NETDEV_TX_OK;
+ }
+
+ n = queue_get_desc(queue_ids[port->id].txdone, port, 1);
+ BUG_ON(n < 0);
+ desc = tx_desc_ptr(port, n);
+ phys = tx_desc_phys(port, n);
+
+ if ((old_skb = port->tx_skb_tab[n]) != NULL) {
+ dma_unmap_single(&dev->dev, desc->data,
+ desc->buf_len, DMA_TO_DEVICE);
+ stats->tx_packets++;
+ stats->tx_bytes += old_skb->len;
+ dev_kfree_skb(old_skb);
+ }
+
+ desc->buf_len = desc->pkt_len = skb->len;
+ desc->data = dma_map_single(&dev->dev, skb->data,
+ skb->len, DMA_TO_DEVICE);
+ if (dma_mapping_error(desc->data)) {
+ desc->data = 0;
+ dev_kfree_skb(skb);
+ port->tx_skb_tab[n] = NULL;
+ stats->tx_dropped++;
+ /* put the desc back on TX-done queue */
+ queue_put_desc(queue_ids[port->id].txdone, phys, desc);
+ return 0;
+ }
+
+ port->tx_skb_tab[n] = skb;
+ wmb();
+ queue_put_desc(queue_ids[port->id].tx, phys, desc);
+ BUG_ON(qmgr_stat_overflow(queue_ids[port->id].tx));
+ dev->trans_start = jiffies;
+
+ if (qmgr_stat_empty(queue_ids[port->id].txdone)) {
+ netif_stop_queue(dev);
+ /* we could miss TX ready interrupt */
+ if (!qmgr_stat_empty(queue_ids[port->id].txdone)) {
+ netif_start_queue(dev);
+ }
+ }
+
+#if DEBUG_TX
+ printk(KERN_DEBUG "hss_xmit() end\n");
+#endif
+ return NETDEV_TX_OK;
+}
+
+
+static int request_queues(struct port *port)
+{
+ int err;
+
+ err = qmgr_request_queue(queue_ids[port->id].rxfree, RX_DESCS, 0, 0);
+ if (err)
+ return err;
+
+ err = qmgr_request_queue(queue_ids[port->id].rx, RX_DESCS, 0, 0);
+ if (err)
+ goto rel_rxfree;
+
+ err = qmgr_request_queue(queue_ids[port->id].tx, TX_DESCS, 0, 0);
+ if (err)
+ goto rel_rx;
+
+ err = qmgr_request_queue(queue_ids[port->id].txdone, TX_DESCS, 0, 0);
+ if (err)
+ goto rel_tx;
+ return 0;
+
+rel_tx:
+ qmgr_release_queue(queue_ids[port->id].tx);
+rel_rx:
+ qmgr_release_queue(queue_ids[port->id].rx);
+rel_rxfree:
+ qmgr_release_queue(queue_ids[port->id].rxfree);
+ return err;
+}
+
+static void release_queues(struct port *port)
+{
+ qmgr_release_queue(queue_ids[port->id].rxfree);
+ qmgr_release_queue(queue_ids[port->id].rx);
+ qmgr_release_queue(queue_ids[port->id].txdone);
+ qmgr_release_queue(queue_ids[port->id].tx);
+}
+
+static int init_queues(struct port *port)
+{
+ int i;
+
+ if (!dma_pool) {
+ dma_pool = dma_pool_create(DRV_NAME, NULL, POOL_ALLOC_SIZE,
+ 32, 0);
+ if (!dma_pool)
+ return -ENOMEM;
+ }
+
+ if (!(port->desc_tab = dma_pool_alloc(dma_pool, GFP_KERNEL,
+ &port->desc_tab_phys)))
+ return -ENOMEM;
+ memset(port->desc_tab, 0, POOL_ALLOC_SIZE);
+ memset(port->rx_skb_tab, 0, sizeof(port->rx_skb_tab)); /* tables */
+ memset(port->tx_skb_tab, 0, sizeof(port->tx_skb_tab));
+
+ /* Setup RX buffers */
+ for (i = 0; i < RX_DESCS; i++) {
+ struct desc *desc = rx_desc_ptr(port, i);
+ struct sk_buff *skb;
+
+ if (!(skb = netdev_alloc_skb(port->netdev, RX_SIZE)))
+ return -ENOMEM;
+ port->rx_skb_tab[i] = skb;
+ desc->buf_len = RX_SIZE;
+ desc->data = dma_map_single(&port->netdev->dev, skb->data,
+ RX_SIZE, DMA_FROM_DEVICE);
+ if (dma_mapping_error(desc->data)) {
+ desc->data = 0;
+ return -EIO;
+ }
+ queue_put_desc(queue_ids[port->id].rxfree,
+ rx_desc_phys(port, i), desc);
+ BUG_ON(qmgr_stat_overflow(queue_ids[port->id].rxfree));
+ }
+
+ /* Setup TX-done queue */
+ for (i = 0; i < TX_DESCS; i++) {
+ queue_put_desc(queue_ids[port->id].txdone,
+ tx_desc_phys(port, i), tx_desc_ptr(port, i));
+ BUG_ON(qmgr_stat_overflow(queue_ids[port->id].txdone));
+ }
+ return 0;
+}
+
+static void destroy_queues(struct port *port)
+{
+ int i;
+
+ while (queue_get_desc(queue_ids[port->id].rxfree, port, 0) >= 0)
+ /* nothing to do here */;
+ while (queue_get_desc(queue_ids[port->id].rx, port, 0) >= 0)
+ /* nothing to do here */;
+ while (queue_get_desc(queue_ids[port->id].tx, port, 1) >= 0)
+ /* nothing to do here */;
+ while (queue_get_desc(queue_ids[port->id].txdone, port, 1) >= 0)
+ /* nothing to do here */;
+
+ if (port->desc_tab) {
+ for (i = 0; i < RX_DESCS; i++) {
+ struct desc *desc = rx_desc_ptr(port, i);
+ struct sk_buff *skb = port->rx_skb_tab[i];
+ if (skb) {
+ if (desc->data)
+ dma_unmap_single(&port->netdev->dev,
+ desc->data, RX_SIZE,
+ DMA_FROM_DEVICE);
+ dev_kfree_skb(skb);
+ }
+ }
+ for (i = 0; i < TX_DESCS; i++) {
+ struct desc *desc = tx_desc_ptr(port, i);
+ struct sk_buff *skb = port->tx_skb_tab[i];
+ if (skb) {
+ if (desc->data)
+ dma_unmap_single(&port->netdev->dev,
+ desc->data,
+ desc->buf_len,
+ DMA_TO_DEVICE);
+ dev_kfree_skb(skb);
+ }
+ }
+ dma_pool_free(dma_pool, port->desc_tab, port->desc_tab_phys);
+ port->desc_tab = NULL;
+ }
+
+ if (!ports_open && dma_pool) {
+ dma_pool_destroy(dma_pool);
+ dma_pool = NULL;
+ }
+}
+
+
+static int hss_open(struct net_device *dev)
+{
+ struct port *port = dev_to_port(dev);
+ struct npe *npe = port->npe;
+ struct msg msg;
+ int i, err;
+
+ if (!npe_running(npe))
+ if ((err = npe_load_firmware(npe, npe_name(npe),
+ &dev->dev)) != 0)
+ return err;
+
+ if ((err = hdlc_open(dev)) != 0)
+ return err;
+
+ if (port->plat->open)
+ if ((err = port->plat->open(port->id, port->netdev,
+ hss_set_carrier)) != 0)
+ goto err_hdlc_close;
+
+ /* HSS main configuration */
+ memset(&msg, 0, sizeof(msg));
+ msg.cmd = PORT_CONFIG_WRITE;
+ msg.hss_port = port->id;
+ msg.index = 0; /* offset in HSS config */
+
+ msg.data32 = PCR_FRM_PULSE_DISABLED |
+ PCR_SOF_NO_FBIT |
+ PCR_MSB_ENDIAN |
+ PCR_TX_DATA_ENABLE;
+
+ if (port->settings.clock_type == CLOCK_INT)
+ msg.data32 |= PCR_SYNC_CLK_DIR_OUTPUT;
+
+ if ((err = npe_send_message(npe, &msg, "HSS_SET_TX_PCR") != 0))
+ goto err_plat_close; /* 0: TX PCR */
+
+ msg.index = 4;
+ msg.data32 ^= PCR_TX_DATA_ENABLE | PCR_DCLK_EDGE_RISING;
+ if ((err = npe_send_message(npe, &msg, "HSS_SET_RX_PCR") != 0))
+ goto err_plat_close; /* 4: RX PCR */
+
+ msg.index = 8;
+ msg.data32 = (port->settings.loopback ? CCR_LOOPBACK : 0) |
+ (port->id ? CCR_SECOND_HSS : 0);
+ if ((err = npe_send_message(npe, &msg, "HSS_SET_CORE_CR") != 0))
+ goto err_plat_close; /* 8: Core CR */
+
+ msg.index = 12;
+ msg.data32 = CLK42X_SPEED_2048KHZ /* FIXME */;
+ if ((err = npe_send_message(npe, &msg, "HSS_SET_CLK_CR") != 0))
+ goto err_plat_close; /* 12: CLK CR */
+
+ msg.data32 = (FRAME_SYNC_OFFSET << 16) | (FRAME_SYNC_SIZE - 1);
+ msg.index = 16;
+ if ((err = npe_send_message(npe, &msg, "HSS_SET_TX_FCR") != 0))
+ goto err_plat_close; /* 16: TX FCR */
+
+ msg.index = 20;
+ if ((err = npe_send_message(npe, &msg, "HSS_SET_RX_FCR") != 0))
+ goto err_plat_close; /* 20: RX FCR */
+
+ msg.data32 = 0; /* Fill LUT with HDLC timeslots */
+ for (i = 0; i < 32 / HSS_LUT_BITS; i++)
+ msg.data32 |= TDMMAP_HDLC << (HSS_LUT_BITS * i);
+
+ for (i = 0; i < 2 /* TX and RX */ * HSS_TIMESLOTS * HSS_LUT_BITS / 8;
+ i += 4) {
+ msg.index = 24 + i; /* 24 - 55: TX LUT, 56 - 87: RX LUT */
+ if ((err = npe_send_message(npe, &msg, "HSS_SET_LUT") != 0))
+ goto err_plat_close;
+ }
+
+ /* HDLC mode configuration */
+ memset(&msg, 0, sizeof(msg));
+ msg.cmd = PKT_NUM_PIPES_WRITE;
+ msg.hss_port = port->id;
+ msg.data8[0] = PKT_NUM_PIPES;
+ if ((err = npe_send_message(npe, &msg, "HSS_SET_PKT_PIPES") != 0))
+ goto err_plat_close;
+
+ memset(&msg, 0, sizeof(msg));
+ msg.cmd = PKT_PIPE_FIFO_SIZEW_WRITE;
+ msg.hss_port = port->id;
+ msg.data8[0] = PKT_PIPE_FIFO_SIZEW;
+ if ((err = npe_send_message(npe, &msg, "HSS_SET_PKT_FIFO") != 0))
+ goto err_plat_close;
+
+ memset(&msg, 0, sizeof(msg));
+ msg.cmd = PKT_PIPE_IDLE_PATTERN_WRITE;
+ msg.hss_port = port->id;
+ msg.data32 = 0x7F7F7F7F;
+ if ((err = npe_send_message(npe, &msg, "HSS_SET_PKT_IDLE") != 0))
+ goto err_plat_close;
+
+ memset(&msg, 0, sizeof(msg));
+ msg.cmd = PORT_CONFIG_LOAD;
+ msg.hss_port = port->id;
+ if ((err = npe_send_message(npe, &msg, "HSS_LOAD_CONFIG") != 0))
+ goto err_plat_close;
+ if ((err = npe_recv_message(npe, &msg, "HSS_LOAD_CONFIG") != 0))
+ goto err_plat_close;
+
+ /* HSS_LOAD_CONFIG for port #1 returns port_id = #4 */
+ if (msg.cmd != PORT_CONFIG_LOAD || msg.data32) {
+ printk(KERN_DEBUG "%s: unexpected message received in"
+ " response to HSS_LOAD_CONFIG: \n", npe_name(npe));
+ err = EIO;
+ goto err_plat_close;
+ }
+
+ memset(&msg, 0, sizeof(msg));
+ msg.cmd = PKT_PIPE_HDLC_CFG_WRITE;
+ msg.hss_port = port->id;
+ msg.data8[0] = port->hdlc_cfg; /* rx_cfg */
+ msg.data8[1] = port->hdlc_cfg | (PKT_EXTRA_FLAGS << 3); /* tx_cfg */
+ if ((err = npe_send_message(npe, &msg, "HSS_SET_HDLC_CFG") != 0))
+ goto err_plat_close;
+
+ memset(&msg, 0, sizeof(msg));
+ msg.cmd = PKT_PIPE_MODE_WRITE;
+ msg.hss_port = port->id;
+ msg.data8[0] = NPE_PKT_MODE_HDLC;
+ /* msg.data8[1] = inv_mask */
+ /* msg.data8[2] = or_mask */
+ if ((err = npe_send_message(npe, &msg, "HSS_SET_PKT_MODE") != 0))
+ goto err_plat_close;
+
+ memset(&msg, 0, sizeof(msg));
+ msg.cmd = PKT_PIPE_RX_SIZE_WRITE;
+ msg.hss_port = port->id;
+ msg.data16[0] = HDLC_MAX_MRU;
+ if ((err = npe_send_message(npe, &msg, "HSS_SET_PKT_RX_SIZE") != 0))
+ goto err_plat_close;
+
+ if ((err = request_queues(port)) != 0)
+ goto err_plat_close;
+
+ if ((err = init_queues(port)) != 0)
+ goto err_destroy_queues;
+
+ memset(&msg, 0, sizeof(msg));
+ msg.cmd = PKT_PIPE_FLOW_ENABLE;
+ msg.hss_port = port->id;
+ if ((err = npe_send_message(npe, &msg, "HSS_ENABLE_PKT_PIPE") != 0))
+ goto err_destroy_queues;
+
+ netif_start_queue(dev);
+
+ qmgr_set_irq(queue_ids[port->id].rx, QUEUE_IRQ_SRC_NOT_EMPTY,
+ hss_rx_irq, dev);
+ qmgr_enable_irq(queue_ids[port->id].rx);
+
+ qmgr_set_irq(queue_ids[port->id].txdone, QUEUE_IRQ_SRC_NOT_EMPTY,
+ hss_xmit_ready_irq, dev);
+ qmgr_enable_irq(queue_ids[port->id].txdone);
+
+ ports_open++;
+ return 0;
+
+err_destroy_queues:
+ destroy_queues(port);
+ release_queues(port);
+err_plat_close:
+ if (port->plat->close)
+ port->plat->close(port->id, port->netdev);
+err_hdlc_close:
+ hdlc_close(dev);
+ return err;
+}
+
+static int hss_close(struct net_device *dev)
+{
+ struct port *port = dev_to_port(dev);
+ struct npe *npe = port->npe;
+ struct msg msg;
+
+ ports_open--;
+ qmgr_disable_irq(queue_ids[port->id].rx);
+ qmgr_disable_irq(queue_ids[port->id].txdone);
+ netif_stop_queue(dev);
+
+ memset(&msg, 0, sizeof(msg));
+ msg.cmd = PKT_PIPE_FLOW_DISABLE;
+ msg.hss_port = port->id;
+ if (npe_send_message(npe, &msg, "HSS_DISABLE_PKT_PIPE")) {
+ printk(KERN_CRIT "HSS-%i: unable to stop HDLC flow\n",
+ port->id);
+ /* The upper level would ignore the error anyway */
+ }
+
+ destroy_queues(port);
+ release_queues(port);
+
+ if (port->plat->close)
+ port->plat->close(port->id, port->netdev);
+ hdlc_close(dev);
+ return 0;
+}
+
+
+static int hss_attach(struct net_device *dev, unsigned short encoding,
+ unsigned short parity)
+{
+ struct port *port = dev_to_port(dev);
+
+ if (encoding != ENCODING_NRZ)
+ return -EINVAL;
+
+ switch(parity) {
+ case PARITY_CRC16_PR1_CCITT:
+ port->hdlc_cfg = 0;
+ return 0;
+
+ case PARITY_CRC32_PR1_CCITT:
+ port->hdlc_cfg = PKT_HDLC_CRC_32;
+ return 0;
+
+ default:
+ return -EINVAL;
+ }
+}
+
+
+static int hss_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+ const size_t size = sizeof(sync_serial_settings);
+ sync_serial_settings new_line;
+ int clk;
+ sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
+ struct port *port = dev_to_port(dev);
+
+ if (cmd != SIOCWANDEV)
+ return hdlc_ioctl(dev, ifr, cmd);
+
+ switch(ifr->ifr_settings.type) {
+ case IF_GET_IFACE:
+ ifr->ifr_settings.type = IF_IFACE_V35;
+ if (ifr->ifr_settings.size < size) {
+ ifr->ifr_settings.size = size; /* data size wanted */
+ return -ENOBUFS;
+ }
+ if (copy_to_user(line, &port->settings, size))
+ return -EFAULT;
+ return 0;
+
+ case IF_IFACE_SYNC_SERIAL:
+ case IF_IFACE_V35:
+ if(!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ if (dev->flags & IFF_UP)
+ return -EBUSY; /* Cannot change parameters when open */
+
+ if (copy_from_user(&new_line, line, size))
+ return -EFAULT;
+
+ clk = new_line.clock_type;
+ if (port->plat->set_clock)
+ clk = port->plat->set_clock(port->id, clk);
+
+ if (clk != CLOCK_EXT && clk != CLOCK_INT)
+ return -EINVAL; /* No such clock setting */
+
+ if (new_line.loopback != 0 && new_line.loopback != 1)
+ return -EINVAL;
+
+ memcpy(&port->settings, &new_line, size); /* Update settings */
+ return 0;
+
+ default:
+ return hdlc_ioctl(dev, ifr, cmd);
+ }
+}
+
+
+static int __devinit hss_init_one(struct platform_device *pdev)
+{
+ struct port *port;
+ struct net_device *dev;
+ hdlc_device *hdlc;
+ int err;
+
+ if ((port = kzalloc(sizeof(*port), GFP_KERNEL)) == NULL)
+ return -ENOMEM;
+ platform_set_drvdata(pdev, port);
+ port->id = pdev->id;
+
+ if ((port->npe = npe_request(0)) == NULL) {
+ err = -ENOSYS;
+ goto err_free;
+ }
+
+ port->plat = pdev->dev.platform_data;
+ if ((port->netdev = dev = alloc_hdlcdev(port)) == NULL) {
+ err = -ENOMEM;
+ goto err_plat;
+ }
+
+ SET_MODULE_OWNER(net);
+ SET_NETDEV_DEV(dev, &pdev->dev);
+ hdlc = dev_to_hdlc(dev);
+ hdlc->attach = hss_attach;
+ hdlc->xmit = hss_xmit;
+ dev->open = hss_open;
+ dev->poll = hss_poll;
+ dev->stop = hss_close;
+ dev->do_ioctl = hss_ioctl;
+ dev->weight = 16;
+ dev->tx_queue_len = 100;
+ port->settings.clock_type = CLOCK_EXT;
+ port->settings.clock_rate = 2048000;
+
+ if (register_hdlc_device(dev)) {
+ printk(KERN_ERR "HSS-%i: unable to register HDLC device\n",
+ port->id);
+ err = -ENOBUFS;
+ goto err_free_netdev;
+ }
+ printk(KERN_INFO "%s: HSS-%i\n", dev->name, port->id);
+ return 0;
+
+err_free_netdev:
+ free_netdev(dev);
+err_plat:
+ npe_release(port->npe);
+ platform_set_drvdata(pdev, NULL);
+err_free:
+ kfree(port);
+ return err;
+}
+
+static int __devexit hss_remove_one(struct platform_device *pdev)
+{
+ struct port *port = platform_get_drvdata(pdev);
+
+ unregister_hdlc_device(port->netdev);
+ free_netdev(port->netdev);
+ npe_release(port->npe);
+ platform_set_drvdata(pdev, NULL);
+ kfree(port);
+ return 0;
+}
+
+static struct platform_driver drv = {
+ .driver.name = DRV_NAME,
+ .probe = hss_init_one,
+ .remove = hss_remove_one,
+};
+
+static int __init hss_init_module(void)
+{
+ if ((ixp4xx_read_fuses() & (IXP4XX_FUSE_HDLC | IXP4XX_FUSE_HSS)) !=
+ (IXP4XX_FUSE_HDLC | IXP4XX_FUSE_HSS))
+ return -ENOSYS;
+ return platform_driver_register(&drv);
+}
+
+static void __exit hss_cleanup_module(void)
+{
+ platform_driver_unregister(&drv);
+}
+
+MODULE_AUTHOR("Krzysztof Halasa <khc@xxxxxxxxx>");
+MODULE_DESCRIPTION("Intel IXP4xx HSS driver");
+MODULE_LICENSE("GPL v2");
+
+module_init(hss_init_module);
+module_exit(hss_cleanup_module);
diff --git a/drivers/net/ixp4xx/ixp4xx_npe.c b/drivers/net/ixp4xx/ixp4xx_npe.c
new file mode 100644
index 0000000..fb1d91b
--- /dev/null
+++ b/drivers/net/ixp4xx/ixp4xx_npe.c
@@ -0,0 +1,731 @@
+/*
+ * Intel IXP4xx Network Processor Engine driver for Linux
+ *
+ * Copyright (C) 2007 Krzysztof Halasa <khc@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/firmware.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <asm/delay.h>
+#include <asm/io.h>
+#include "npe.h"
+
+#define DEBUG_MSG 0
+#define DEBUG_FW 0
+
+#define NPE_COUNT 3
+#define MAX_RETRIES 1000 /* microseconds */
+#define NPE_42X_DATA_SIZE 0x800 /* in dwords */
+#define NPE_46X_DATA_SIZE 0x1000
+#define NPE_A_42X_INSTR_SIZE 0x1000
+#define NPE_B_AND_C_42X_INSTR_SIZE 0x800
+#define NPE_46X_INSTR_SIZE 0x1000
+#define REGS_SIZE 0x1000
+
+#define NPE_PHYS_REG 32
+
+#define FW_MAGIC 0xFEEDF00D
+#define FW_BLOCK_TYPE_INSTR 0x0
+#define FW_BLOCK_TYPE_DATA 0x1
+#define FW_BLOCK_TYPE_EOF 0xF
+
+/* NPE exec status (read) and command (write) */
+#define CMD_NPE_STEP 0x01
+#define CMD_NPE_START 0x02
+#define CMD_NPE_STOP 0x03
+#define CMD_NPE_CLR_PIPE 0x04
+#define CMD_CLR_PROFILE_CNT 0x0C
+#define CMD_RD_INS_MEM 0x10 /* instruction memory */
+#define CMD_WR_INS_MEM 0x11
+#define CMD_RD_DATA_MEM 0x12 /* data memory */
+#define CMD_WR_DATA_MEM 0x13
+#define CMD_RD_ECS_REG 0x14 /* exec access register */
+#define CMD_WR_ECS_REG 0x15
+
+#define STAT_RUN 0x80000000
+#define STAT_STOP 0x40000000
+#define STAT_CLEAR 0x20000000
+#define STAT_ECS_K 0x00800000 /* pipeline clean */
+
+#define NPE_STEVT 0x1B
+#define NPE_STARTPC 0x1C
+#define NPE_REGMAP 0x1E
+#define NPE_CINDEX 0x1F
+
+#define INSTR_WR_REG_SHORT 0x0000C000
+#define INSTR_WR_REG_BYTE 0x00004000
+#define INSTR_RD_FIFO 0x0F888220
+#define INSTR_RESET_MBOX 0x0FAC8210
+
+#define ECS_BG_CTXT_REG_0 0x00 /* Background Executing Context */
+#define ECS_BG_CTXT_REG_1 0x01 /* Stack level */
+#define ECS_BG_CTXT_REG_2 0x02
+#define ECS_PRI_1_CTXT_REG_0 0x04 /* Priority 1 Executing Context */
+#define ECS_PRI_1_CTXT_REG_1 0x05 /* Stack level */
+#define ECS_PRI_1_CTXT_REG_2 0x06
+#define ECS_PRI_2_CTXT_REG_0 0x08 /* Priority 2 Executing Context */
+#define ECS_PRI_2_CTXT_REG_1 0x09 /* Stack level */
+#define ECS_PRI_2_CTXT_REG_2 0x0A
+#define ECS_DBG_CTXT_REG_0 0x0C /* Debug Executing Context */
+#define ECS_DBG_CTXT_REG_1 0x0D /* Stack level */
+#define ECS_DBG_CTXT_REG_2 0x0E
+#define ECS_INSTRUCT_REG 0x11 /* NPE Instruction Register */
+
+#define ECS_REG_0_ACTIVE 0x80000000 /* all levels */
+#define ECS_REG_0_NEXTPC_MASK 0x1FFF0000 /* BG/PRI1/PRI2 levels */
+#define ECS_REG_0_LDUR_BITS 8
+#define ECS_REG_0_LDUR_MASK 0x00000700 /* all levels */
+#define ECS_REG_1_CCTXT_BITS 16
+#define ECS_REG_1_CCTXT_MASK 0x000F0000 /* all levels */
+#define ECS_REG_1_SELCTXT_BITS 0
+#define ECS_REG_1_SELCTXT_MASK 0x0000000F /* all levels */
+#define ECS_DBG_REG_2_IF 0x00100000 /* debug level */
+#define ECS_DBG_REG_2_IE 0x00080000 /* debug level */
+
+/* NPE watchpoint_fifo register bit */
+#define WFIFO_VALID 0x80000000
+
+/* NPE messaging_status register bit definitions */
+#define MSGSTAT_OFNE 0x00010000 /* OutFifoNotEmpty */
+#define MSGSTAT_IFNF 0x00020000 /* InFifoNotFull */
+#define MSGSTAT_OFNF 0x00040000 /* OutFifoNotFull */
+#define MSGSTAT_IFNE 0x00080000 /* InFifoNotEmpty */
+#define MSGSTAT_MBINT 0x00100000 /* Mailbox interrupt */
+#define MSGSTAT_IFINT 0x00200000 /* InFifo interrupt */
+#define MSGSTAT_OFINT 0x00400000 /* OutFifo interrupt */
+#define MSGSTAT_WFINT 0x00800000 /* WatchFifo interrupt */
+
+/* NPE messaging_control register bit definitions */
+#define MSGCTL_OUT_FIFO 0x00010000 /* enable output FIFO */
+#define MSGCTL_IN_FIFO 0x00020000 /* enable input FIFO */
+#define MSGCTL_OUT_FIFO_WRITE 0x01000000 /* enable FIFO + WRITE */
+#define MSGCTL_IN_FIFO_WRITE 0x02000000
+
+/* NPE mailbox_status value for reset */
+#define RESET_MBOX_STAT 0x0000F0F0
+
+const char *npe_names[] = { "NPE-A", "NPE-B", "NPE-C" };
+
+#define print_npe(pri, npe, fmt, ...) \
+ printk(pri "%s: " fmt, npe_name(npe), ## __VA_ARGS__)
+
+#if DEBUG_MSG
+#define debug_msg(npe, fmt, ...) \
+ print_npe(KERN_DEBUG, npe, fmt, ## __VA_ARGS__)
+#else
+#define debug_msg(npe, fmt, ...)
+#endif
+
+static struct {
+ u32 reg, val;
+}ecs_reset[] = {
+ { ECS_BG_CTXT_REG_0, 0xA0000000 },
+ { ECS_BG_CTXT_REG_1, 0x01000000 },
+ { ECS_BG_CTXT_REG_2, 0x00008000 },
+ { ECS_PRI_1_CTXT_REG_0, 0x20000080 },
+ { ECS_PRI_1_CTXT_REG_1, 0x01000000 },
+ { ECS_PRI_1_CTXT_REG_2, 0x00008000 },
+ { ECS_PRI_2_CTXT_REG_0, 0x20000080 },
+ { ECS_PRI_2_CTXT_REG_1, 0x01000000 },
+ { ECS_PRI_2_CTXT_REG_2, 0x00008000 },
+ { ECS_DBG_CTXT_REG_0, 0x20000000 },
+ { ECS_DBG_CTXT_REG_1, 0x00000000 },
+ { ECS_DBG_CTXT_REG_2, 0x001E0000 },
+ { ECS_INSTRUCT_REG, 0x1003C00F },
+};
+
+static struct npe npe_tab[NPE_COUNT] = {
+ {
+ .id = 0,
+ .regs = (struct npe_regs __iomem *)IXP4XX_NPEA_BASE_VIRT,
+ .regs_phys = IXP4XX_NPEA_BASE_PHYS,
+ }, {
+ .id = 1,
+ .regs = (struct npe_regs __iomem *)IXP4XX_NPEB_BASE_VIRT,
+ .regs_phys = IXP4XX_NPEB_BASE_PHYS,
+ }, {
+ .id = 2,
+ .regs = (struct npe_regs __iomem *)IXP4XX_NPEC_BASE_VIRT,
+ .regs_phys = IXP4XX_NPEC_BASE_PHYS,
+ }
+};
+
+int npe_running(struct npe *npe)
+{
+ return (__raw_readl(&npe->regs->exec_status_cmd) & STAT_RUN) != 0;
+}
+
+static void npe_cmd_write(struct npe *npe, u32 addr, int cmd, u32 data)
+{
+ __raw_writel(data, &npe->regs->exec_data);
+ __raw_writel(addr, &npe->regs->exec_addr);
+ __raw_writel(cmd, &npe->regs->exec_status_cmd);
+}
+
+static u32 npe_cmd_read(struct npe *npe, u32 addr, int cmd)
+{
+ __raw_writel(addr, &npe->regs->exec_addr);
+ __raw_writel(cmd, &npe->regs->exec_status_cmd);
+ /* Iintroduce extra read cycles after issuing read command to NPE
+ so that we read the register after the NPE has updated it.
+ This is to overcome race condition between XScale and NPE */
+ __raw_readl(&npe->regs->exec_data);
+ __raw_readl(&npe->regs->exec_data);
+ return __raw_readl(&npe->regs->exec_data);
+}
+
+static void npe_clear_active(struct npe *npe, u32 reg)
+{
+ u32 val = npe_cmd_read(npe, reg, CMD_RD_ECS_REG);
+ npe_cmd_write(npe, reg, CMD_WR_ECS_REG, val & ~ECS_REG_0_ACTIVE);
+}
+
+static void npe_start(struct npe *npe)
+{
+ /* ensure only Background Context Stack Level is active */
+ npe_clear_active(npe, ECS_PRI_1_CTXT_REG_0);
+ npe_clear_active(npe, ECS_PRI_2_CTXT_REG_0);
+ npe_clear_active(npe, ECS_DBG_CTXT_REG_0);
+
+ __raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd);
+ __raw_writel(CMD_NPE_START, &npe->regs->exec_status_cmd);
+}
+
+static void npe_stop(struct npe *npe)
+{
+ __raw_writel(CMD_NPE_STOP, &npe->regs->exec_status_cmd);
+ __raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd); /*FIXME?*/
+}
+
+static int __must_check npe_debug_instr(struct npe *npe, u32 instr, u32 ctx,
+ u32 ldur)
+{
+ u32 wc;
+ int i;
+
+ /* set the Active bit, and the LDUR, in the debug level */
+ npe_cmd_write(npe, ECS_DBG_CTXT_REG_0, CMD_WR_ECS_REG,
+ ECS_REG_0_ACTIVE | (ldur << ECS_REG_0_LDUR_BITS));
+
+ /* set CCTXT at ECS DEBUG L3 to specify in which context to execute
+ the instruction, and set SELCTXT at ECS DEBUG Level to specify
+ which context store to access.
+ Debug ECS Level Reg 1 has form 0x000n000n, where n = context number
+ */
+ npe_cmd_write(npe, ECS_DBG_CTXT_REG_1, CMD_WR_ECS_REG,
+ (ctx << ECS_REG_1_CCTXT_BITS) |
+ (ctx << ECS_REG_1_SELCTXT_BITS));
+
+ /* clear the pipeline */
+ __raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd);
+
+ /* load NPE instruction into the instruction register */
+ npe_cmd_write(npe, ECS_INSTRUCT_REG, CMD_WR_ECS_REG, instr);
+
+ /* we need this value later to wait for completion of NPE execution
+ step */
+ wc = __raw_readl(&npe->regs->watch_count);
+
+ /* issue a Step One command via the Execution Control register */
+ __raw_writel(CMD_NPE_STEP, &npe->regs->exec_status_cmd);
+
+ /* Watch Count register increments when NPE completes an instruction */
+ for (i = 0; i < MAX_RETRIES; i++) {
+ if (wc != __raw_readl(&npe->regs->watch_count))
+ return 0;
+ udelay(1);
+ }
+
+ print_npe(KERN_ERR, npe, "reset: npe_debug_instr(): timeout\n");
+ return -ETIMEDOUT;
+}
+
+static int __must_check npe_logical_reg_write8(struct npe *npe, u32 addr,
+ u8 val, u32 ctx)
+{
+ /* here we build the NPE assembler instruction: mov8 d0, #0 */
+ u32 instr = INSTR_WR_REG_BYTE | /* OpCode */
+ addr << 9 | /* base Operand */
+ (val & 0x1F) << 4 | /* lower 5 bits to immediate data */
+ (val & ~0x1F) << (18 - 5);/* higher 3 bits to CoProc instr. */
+ return npe_debug_instr(npe, instr, ctx, 1); /* execute it */
+}
+
+static int __must_check npe_logical_reg_write16(struct npe *npe, u32 addr,
+ u16 val, u32 ctx)
+{
+ /* here we build the NPE assembler instruction: mov16 d0, #0 */
+ u32 instr = INSTR_WR_REG_SHORT | /* OpCode */
+ addr << 9 | /* base Operand */
+ (val & 0x1F) << 4 | /* lower 5 bits to immediate data */
+ (val & ~0x1F) << (18 - 5);/* higher 11 bits to CoProc instr. */
+ return npe_debug_instr(npe, instr, ctx, 1); /* execute it */
+}
+
+static int __must_check npe_logical_reg_write32(struct npe *npe, u32 addr,
+ u32 val, u32 ctx)
+{
+ /* write in 16 bit steps first the high and then the low value */
+ if (npe_logical_reg_write16(npe, addr, val >> 16, ctx))
+ return -ETIMEDOUT;
+ return npe_logical_reg_write16(npe, addr + 2, val & 0xFFFF, ctx);
+}
+
+static int npe_reset(struct npe *npe)
+{
+ u32 val, ctl, exec_count, ctx_reg2;
+ int i;
+
+ ctl = (__raw_readl(&npe->regs->messaging_control) | 0x3F000000) &
+ 0x3F3FFFFF;
+
+ /* disable parity interrupt */
+ __raw_writel(ctl & 0x3F00FFFF, &npe->regs->messaging_control);
+
+ /* pre exec - debug instruction */
+ /* turn off the halt bit by clearing Execution Count register. */
+ exec_count = __raw_readl(&npe->regs->exec_count);
+ __raw_writel(0, &npe->regs->exec_count);
+ /* ensure that IF and IE are on (temporarily), so that we don't end up
+ stepping forever */
+ ctx_reg2 = npe_cmd_read(npe, ECS_DBG_CTXT_REG_2, CMD_RD_ECS_REG);
+ npe_cmd_write(npe, ECS_DBG_CTXT_REG_2, CMD_WR_ECS_REG, ctx_reg2 |
+ ECS_DBG_REG_2_IF | ECS_DBG_REG_2_IE);
+
+ /* clear the FIFOs */
+ while (__raw_readl(&npe->regs->watchpoint_fifo) & WFIFO_VALID)
+ ;
+ while (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_OFNE)
+ /* read from the outFIFO until empty */
+ print_npe(KERN_DEBUG, npe, "npe_reset: read FIFO = 0x%X\n",
+ __raw_readl(&npe->regs->in_out_fifo));
+
+ while (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNE)
+ /* step execution of the NPE intruction to read inFIFO using
+ the Debug Executing Context stack */
+ if (npe_debug_instr(npe, INSTR_RD_FIFO, 0, 0))
+ return -ETIMEDOUT;
+
+ /* reset the mailbox reg from the XScale side */
+ __raw_writel(RESET_MBOX_STAT, &npe->regs->mailbox_status);
+ /* from NPE side */
+ if (npe_debug_instr(npe, INSTR_RESET_MBOX, 0, 0))
+ return -ETIMEDOUT;
+
+ /* Reset the physical registers in the NPE register file */
+ for (val = 0; val < NPE_PHYS_REG; val++) {
+ if (npe_logical_reg_write16(npe, NPE_REGMAP, val >> 1, 0))
+ return -ETIMEDOUT;
+ /* address is either 0 or 4 */
+ if (npe_logical_reg_write32(npe, (val & 1) * 4, 0, 0))
+ return -ETIMEDOUT;
+ }
+
+ /* Reset the context store = each context's Context Store registers */
+
+ /* Context 0 has no STARTPC. Instead, this value is used to set NextPC
+ for Background ECS, to set where NPE starts executing code */
+ val = npe_cmd_read(npe, ECS_BG_CTXT_REG_0, CMD_RD_ECS_REG);
+ val &= ~ECS_REG_0_NEXTPC_MASK;
+ val |= (0 /* NextPC */ << 16) & ECS_REG_0_NEXTPC_MASK;
+ npe_cmd_write(npe, ECS_BG_CTXT_REG_0, CMD_WR_ECS_REG, val);
+
+ for (i = 0; i < 16; i++) {
+ if (i) { /* Context 0 has no STEVT nor STARTPC */
+ /* STEVT = off, 0x80 */
+ if (npe_logical_reg_write8(npe, NPE_STEVT, 0x80, i))
+ return -ETIMEDOUT;
+ if (npe_logical_reg_write16(npe, NPE_STARTPC, 0, i))
+ return -ETIMEDOUT;
+ }
+ /* REGMAP = d0->p0, d8->p2, d16->p4 */
+ if (npe_logical_reg_write16(npe, NPE_REGMAP, 0x820, i))
+ return -ETIMEDOUT;
+ if (npe_logical_reg_write8(npe, NPE_CINDEX, 0, i))
+ return -ETIMEDOUT;
+ }
+
+ /* post exec */
+ /* clear active bit in debug level */
+ npe_cmd_write(npe, ECS_DBG_CTXT_REG_0, CMD_WR_ECS_REG, 0);
+ /* clear the pipeline */
+ __raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd);
+ /* restore previous values */
+ __raw_writel(exec_count, &npe->regs->exec_count);
+ npe_cmd_write(npe, ECS_DBG_CTXT_REG_2, CMD_WR_ECS_REG, ctx_reg2);
+
+ /* write reset values to Execution Context Stack registers */
+ for (val = 0; val < ARRAY_SIZE(ecs_reset); val++)
+ npe_cmd_write(npe, ecs_reset[val].reg, CMD_WR_ECS_REG,
+ ecs_reset[val].val);
+
+ /* clear the profile counter */
+ __raw_writel(CMD_CLR_PROFILE_CNT, &npe->regs->exec_status_cmd);
+
+ __raw_writel(0, &npe->regs->exec_count);
+ __raw_writel(0, &npe->regs->action_points[0]);
+ __raw_writel(0, &npe->regs->action_points[1]);
+ __raw_writel(0, &npe->regs->action_points[2]);
+ __raw_writel(0, &npe->regs->action_points[3]);
+ __raw_writel(0, &npe->regs->watch_count);
+
+ val = ixp4xx_read_fuses();
+ /* reset the NPE */
+ ixp4xx_write_fuses(val & ~(IXP4XX_FUSE_RESET_NPEA << npe->id));
+ for (i = 0; i < MAX_RETRIES; i++) {
+ if (!(ixp4xx_read_fuses() &
+ (IXP4XX_FUSE_RESET_NPEA << npe->id)))
+ break; /* reset completed */
+ udelay(1);
+ }
+ if (i == MAX_RETRIES)
+ return -ETIMEDOUT;
+
+ /* deassert reset */
+ ixp4xx_write_fuses(val | (IXP4XX_FUSE_RESET_NPEA << npe->id));
+ for (i = 0; i < MAX_RETRIES; i++) {
+ if (ixp4xx_read_fuses() & (IXP4XX_FUSE_RESET_NPEA << npe->id))
+ break; /* NPE is back alive */
+ udelay(1);
+ }
+ if (i == MAX_RETRIES)
+ return -ETIMEDOUT;
+
+ npe_stop(npe);
+
+ /* restore NPE configuration bus Control Register - parity settings */
+ __raw_writel(ctl, &npe->regs->messaging_control);
+ return 0;
+}
+
+
+int npe_send_message(struct npe *npe, const void *msg, const char *what)
+{
+ const u32 *send = msg;
+ int cycles = 0;
+
+ debug_msg(npe, "Trying to send message %s [%08X:%08X]\n",
+ what, send[0], send[1]);
+
+ if (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNE) {
+ debug_msg(npe, "NPE input FIFO not empty\n");
+ return -EIO;
+ }
+
+ __raw_writel(send[0], &npe->regs->in_out_fifo);
+
+ if (!(__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNF)) {
+ debug_msg(npe, "NPE input FIFO full\n");
+ return -EIO;
+ }
+
+ __raw_writel(send[1], &npe->regs->in_out_fifo);
+
+ while ((cycles < MAX_RETRIES) &&
+ (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNE)) {
+ udelay(1);
+ cycles++;
+ }
+
+ if (cycles == MAX_RETRIES) {
+ debug_msg(npe, "Timeout sending message\n");
+ return -ETIMEDOUT;
+ }
+
+ debug_msg(npe, "Sending a message took %i cycles\n", cycles);
+ return 0;
+}
+
+int npe_recv_message(struct npe *npe, void *msg, const char *what)
+{
+ u32 *recv = msg;
+ int cycles = 0, cnt = 0;
+
+ debug_msg(npe, "Trying to receive message %s\n", what);
+
+ while (cycles < MAX_RETRIES) {
+ if (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_OFNE) {
+ recv[cnt++] = __raw_readl(&npe->regs->in_out_fifo);
+ if (cnt == 2)
+ break;
+ } else {
+ udelay(1);
+ cycles++;
+ }
+ }
+
+ switch(cnt) {
+ case 1:
+ debug_msg(npe, "Received [%08X]\n", recv[0]);
+ break;
+ case 2:
+ debug_msg(npe, "Received [%08X:%08X]\n", recv[0], recv[1]);
+ break;
+ }
+
+ if (cycles == MAX_RETRIES) {
+ debug_msg(npe, "Timeout waiting for message\n");
+ return -ETIMEDOUT;
+ }
+
+ debug_msg(npe, "Receiving a message took %i cycles\n", cycles);
+ return 0;
+}
+
+int npe_send_recv_message(struct npe *npe, void *msg, const char *what)
+{
+ int result;
+ u32 *send = msg, recv[2];
+
+ if ((result = npe_send_message(npe, msg, what)) != 0)
+ return result;
+ if ((result = npe_recv_message(npe, recv, what)) != 0)
+ return result;
+
+ if ((recv[0] != send[0]) || (recv[1] != send[1])) {
+ debug_msg(npe, "Message %s: unexpected message received\n",
+ what);
+ return -EIO;
+ }
+ return 0;
+}
+
+
+int npe_load_firmware(struct npe *npe, const char *name, struct device *dev)
+{
+ const struct firmware *fw_entry;
+
+ struct dl_block {
+ u32 type;
+ u32 offset;
+ } *blk;
+
+ struct dl_image {
+ u32 magic;
+ u32 id;
+ u32 size;
+ union {
+ u32 data[0];
+ struct dl_block blocks[0];
+ };
+ } *image;
+
+ struct dl_codeblock {
+ u32 npe_addr;
+ u32 size;
+ u32 data[0];
+ } *cb;
+
+ int i, j, err, data_size, instr_size, blocks, table_end;
+ u32 cmd;
+
+ if ((err = request_firmware(&fw_entry, name, dev)) != 0)
+ return err;
+
+ err = -EINVAL;
+ if (fw_entry->size < sizeof(struct dl_image)) {
+ print_npe(KERN_ERR, npe, "incomplete firmware file\n");
+ goto err;
+ }
+ image = (struct dl_image*)fw_entry->data;
+
+#if DEBUG_FW
+ print_npe(KERN_DEBUG, npe, "firmware: %08X %08X %08X (0x%X bytes)\n",
+ image->magic, image->id, image->size, image->size * 4);
+#endif
+
+ if (image->magic == swab32(FW_MAGIC)) { /* swapped file */
+ image->id = swab32(image->id);
+ image->size = swab32(image->size);
+ } else if (image->magic != FW_MAGIC) {
+ print_npe(KERN_ERR, npe, "bad firmware file magic: 0x%X\n",
+ image->magic);
+ goto err;
+ }
+ if ((image->size * 4 + sizeof(struct dl_image)) != fw_entry->size) {
+ print_npe(KERN_ERR, npe,
+ "inconsistent size of firmware file\n");
+ goto err;
+ }
+ if (((image->id >> 24) & 0xF /* NPE ID */) != npe->id) {
+ print_npe(KERN_ERR, npe, "firmware file NPE ID mismatch\n");
+ goto err;
+ }
+ if (image->magic == swab32(FW_MAGIC))
+ for (i = 0; i < image->size; i++)
+ image->data[i] = swab32(image->data[i]);
+
+ if (!cpu_is_ixp46x() && ((image->id >> 28) & 0xF /* device ID */)) {
+ print_npe(KERN_INFO, npe, "IXP46x firmware ignored on "
+ "IXP42x\n");
+ goto err;
+ }
+
+ if (npe_running(npe)) {
+ print_npe(KERN_INFO, npe, "unable to load firmware, NPE is "
+ "already running\n");
+ err = -EBUSY;
+ goto err;
+ }
+#if 0
+ npe_stop(npe);
+ npe_reset(npe);
+#endif
+
+ print_npe(KERN_INFO, npe, "firmware functionality 0x%X, "
+ "revision 0x%X:%X\n", (image->id >> 16) & 0xFF,
+ (image->id >> 8) & 0xFF, image->id & 0xFF);
+
+ if (!cpu_is_ixp46x()) {
+ if (!npe->id)
+ instr_size = NPE_A_42X_INSTR_SIZE;
+ else
+ instr_size = NPE_B_AND_C_42X_INSTR_SIZE;
+ data_size = NPE_42X_DATA_SIZE;
+ } else {
+ instr_size = NPE_46X_INSTR_SIZE;
+ data_size = NPE_46X_DATA_SIZE;
+ }
+
+ for (blocks = 0; blocks * sizeof(struct dl_block) / 4 < image->size;
+ blocks++)
+ if (image->blocks[blocks].type == FW_BLOCK_TYPE_EOF)
+ break;
+ if (blocks * sizeof(struct dl_block) / 4 >= image->size) {
+ print_npe(KERN_INFO, npe, "firmware EOF block marker not "
+ "found\n");
+ goto err;
+ }
+
+#if DEBUG_FW
+ print_npe(KERN_DEBUG, npe, "%i firmware blocks found\n", blocks);
+#endif
+
+ table_end = blocks * sizeof(struct dl_block) / 4 + 1 /* EOF marker */;
+ for (i = 0, blk = image->blocks; i < blocks; i++, blk++) {
+ if (blk->offset > image->size - sizeof(struct dl_codeblock) / 4
+ || blk->offset < table_end) {
+ print_npe(KERN_INFO, npe, "invalid offset 0x%X of "
+ "firmware block #%i\n", blk->offset, i);
+ goto err;
+ }
+
+ cb = (struct dl_codeblock*)&image->data[blk->offset];
+ if (blk->type == FW_BLOCK_TYPE_INSTR) {
+ if (cb->npe_addr + cb->size > instr_size)
+ goto too_big;
+ cmd = CMD_WR_INS_MEM;
+ } else if (blk->type == FW_BLOCK_TYPE_DATA) {
+ if (cb->npe_addr + cb->size > data_size)
+ goto too_big;
+ cmd = CMD_WR_DATA_MEM;
+ } else {
+ print_npe(KERN_INFO, npe, "invalid firmware block #%i "
+ "type 0x%X\n", i, blk->type);
+ goto err;
+ }
+ if (blk->offset + sizeof(*cb) / 4 + cb->size > image->size) {
+ print_npe(KERN_INFO, npe, "firmware block #%i doesn't "
+ "fit in firmware image: type %c, start 0x%X,"
+ " length 0x%X\n", i,
+ blk->type == FW_BLOCK_TYPE_INSTR ? 'I' : 'D',
+ cb->npe_addr, cb->size);
+ goto err;
+ }
+
+ for (j = 0; j < cb->size; j++)
+ npe_cmd_write(npe, cb->npe_addr + j, cmd, cb->data[j]);
+ }
+
+ npe_start(npe);
+ if (!npe_running(npe))
+ print_npe(KERN_ERR, npe, "unable to start\n");
+ release_firmware(fw_entry);
+ return 0;
+
+too_big:
+ print_npe(KERN_INFO, npe, "firmware block #%i doesn't fit in NPE "
+ "memory: type %c, start 0x%X, length 0x%X\n", i,
+ blk->type == FW_BLOCK_TYPE_INSTR ? 'I' : 'D',
+ cb->npe_addr, cb->size);
+err:
+ release_firmware(fw_entry);
+ return err;
+}
+
+
+struct npe *npe_request(int id)
+{
+ if (id < NPE_COUNT)
+ if (npe_tab[id].valid)
+ if (try_module_get(THIS_MODULE))
+ return &npe_tab[id];
+ return NULL;
+}
+
+void npe_release(struct npe *npe)
+{
+ module_put(THIS_MODULE);
+}
+
+
+static int __init npe_init_module(void)
+{
+
+ int i, found = 0;
+
+ for (i = 0; i < NPE_COUNT; i++) {
+ struct npe *npe = &npe_tab[i];
+ if (!(ixp4xx_read_fuses() & (IXP4XX_FUSE_RESET_NPEA << i)))
+ continue; /* NPE already disabled or not present */
+ if (!(npe->mem_res = request_mem_region(npe->regs_phys,
+ REGS_SIZE,
+ npe_name(npe)))) {
+ print_npe(KERN_ERR, npe,
+ "failed to request memory region\n");
+ continue;
+ }
+
+ if (npe_reset(npe))
+ continue;
+ npe->valid = 1;
+ found++;
+ }
+
+ if (!found)
+ return -ENOSYS;
+ return 0;
+}
+
+static void __exit npe_cleanup_module(void)
+{
+ int i;
+
+ for (i = 0; i < NPE_COUNT; i++)
+ if (npe_tab[i].mem_res) {
+ npe_reset(&npe_tab[i]);
+ release_resource(npe_tab[i].mem_res);
+ }
+}
+
+module_init(npe_init_module);
+module_exit(npe_cleanup_module);
+
+MODULE_AUTHOR("Krzysztof Halasa");
+MODULE_LICENSE("GPL v2");
+
+EXPORT_SYMBOL(npe_names);
+EXPORT_SYMBOL(npe_running);
+EXPORT_SYMBOL(npe_request);
+EXPORT_SYMBOL(npe_release);
+EXPORT_SYMBOL(npe_load_firmware);
+EXPORT_SYMBOL(npe_send_message);
+EXPORT_SYMBOL(npe_recv_message);
+EXPORT_SYMBOL(npe_send_recv_message);
diff --git a/drivers/net/ixp4xx/ixp4xx_qmgr.c b/drivers/net/ixp4xx/ixp4xx_qmgr.c
new file mode 100644
index 0000000..7dcb2b6
--- /dev/null
+++ b/drivers/net/ixp4xx/ixp4xx_qmgr.c
@@ -0,0 +1,273 @@
+/*
+ * Intel IXP4xx Queue Manager driver for Linux
+ *
+ * Copyright (C) 2007 Krzysztof Halasa <khc@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <asm/io.h>
+#include "qmgr.h"
+
+#define DEBUG 0
+
+struct qmgr_regs __iomem *qmgr_regs;
+static struct resource *mem_res;
+static spinlock_t qmgr_lock;
+static u32 used_sram_bitmap[4]; /* 128 16-dword pages */
+static void (*irq_handlers[HALF_QUEUES])(void *pdev);
+static void *irq_pdevs[HALF_QUEUES];
+
+void qmgr_set_irq(unsigned int queue, int src,
+ void (*handler)(void *pdev), void *pdev)
+{
+ u32 __iomem *reg = &qmgr_regs->irqsrc[queue / 8]; /* 8 queues / u32 */
+ int bit = (queue % 8) * 4; /* 3 bits + 1 reserved bit per queue */
+ unsigned long flags;
+
+ src &= 7;
+ spin_lock_irqsave(&qmgr_lock, flags);
+ __raw_writel((__raw_readl(reg) & ~(7 << bit)) | (src << bit), reg);
+ irq_handlers[queue] = handler;
+ irq_pdevs[queue] = pdev;
+ spin_unlock_irqrestore(&qmgr_lock, flags);
+}
+
+
+static irqreturn_t qmgr_irq1(int irq, void *pdev)
+{
+ int i;
+ u32 val = __raw_readl(&qmgr_regs->irqstat[0]);
+ __raw_writel(val, &qmgr_regs->irqstat[0]); /* ACK */
+
+ for (i = 0; i < HALF_QUEUES; i++)
+ if (val & (1 << i))
+ irq_handlers[i](irq_pdevs[i]);
+
+ return val ? IRQ_HANDLED : 0;
+}
+
+
+void qmgr_enable_irq(unsigned int queue)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&qmgr_lock, flags);
+ __raw_writel(__raw_readl(&qmgr_regs->irqen[0]) | (1 << queue),
+ &qmgr_regs->irqen[0]);
+ spin_unlock_irqrestore(&qmgr_lock, flags);
+}
+
+void qmgr_disable_irq(unsigned int queue)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&qmgr_lock, flags);
+ __raw_writel(__raw_readl(&qmgr_regs->irqen[0]) & ~(1 << queue),
+ &qmgr_regs->irqen[0]);
+ spin_unlock_irqrestore(&qmgr_lock, flags);
+}
+
+static inline void shift_mask(u32 *mask)
+{
+ mask[3] = mask[3] << 1 | mask[2] >> 31;
+ mask[2] = mask[2] << 1 | mask[1] >> 31;
+ mask[1] = mask[1] << 1 | mask[0] >> 31;
+ mask[0] <<= 1;
+}
+
+int qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
+ unsigned int nearly_empty_watermark,
+ unsigned int nearly_full_watermark)
+{
+ u32 cfg, addr = 0, mask[4]; /* in 16-dwords */
+ int err;
+
+ if (queue >= HALF_QUEUES)
+ return -ERANGE;
+
+ if ((nearly_empty_watermark | nearly_full_watermark) & ~7)
+ return -EINVAL;
+
+ switch (len) {
+ case 16:
+ cfg = 0 << 24;
+ mask[0] = 0x1;
+ break;
+ case 32:
+ cfg = 1 << 24;
+ mask[0] = 0x3;
+ break;
+ case 64:
+ cfg = 2 << 24;
+ mask[0] = 0xF;
+ break;
+ case 128:
+ cfg = 3 << 24;
+ mask[0] = 0xFF;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ cfg |= nearly_empty_watermark << 26;
+ cfg |= nearly_full_watermark << 29;
+ len /= 16; /* in 16-dwords: 1, 2, 4 or 8 */
+ mask[1] = mask[2] = mask[3] = 0;
+
+ if (!try_module_get(THIS_MODULE))
+ return -ENODEV;
+
+ spin_lock_irq(&qmgr_lock);
+ if (__raw_readl(&qmgr_regs->sram[queue])) {
+ err = -EBUSY;
+ goto err;
+ }
+
+ while (1) {
+ if (!(used_sram_bitmap[0] & mask[0]) &&
+ !(used_sram_bitmap[1] & mask[1]) &&
+ !(used_sram_bitmap[2] & mask[2]) &&
+ !(used_sram_bitmap[3] & mask[3]))
+ break; /* found free space */
+
+ addr++;
+ shift_mask(mask);
+ if (addr + len > ARRAY_SIZE(qmgr_regs->sram)) {
+ printk(KERN_ERR "qmgr: no free SRAM space for"
+ " queue %i\n", queue);
+ err = -ENOMEM;
+ goto err;
+ }
+ }
+
+ used_sram_bitmap[0] |= mask[0];
+ used_sram_bitmap[1] |= mask[1];
+ used_sram_bitmap[2] |= mask[2];
+ used_sram_bitmap[3] |= mask[3];
+ __raw_writel(cfg | (addr << 14), &qmgr_regs->sram[queue]);
+ spin_unlock_irq(&qmgr_lock);
+
+#if DEBUG
+ printk(KERN_DEBUG "qmgr: requested queue %i, addr = 0x%02X\n",
+ queue, addr);
+#endif
+ return 0;
+
+err:
+ spin_unlock_irq(&qmgr_lock);
+ module_put(THIS_MODULE);
+ return err;
+}
+
+void qmgr_release_queue(unsigned int queue)
+{
+ u32 cfg, addr, mask[4];
+
+ BUG_ON(queue >= HALF_QUEUES); /* not in valid range */
+
+ spin_lock_irq(&qmgr_lock);
+ cfg = __raw_readl(&qmgr_regs->sram[queue]);
+ addr = (cfg >> 14) & 0xFF;
+
+ BUG_ON(!addr); /* not requested */
+
+ switch ((cfg >> 24) & 3) {
+ case 0: mask[0] = 0x1; break;
+ case 1: mask[0] = 0x3; break;
+ case 2: mask[0] = 0xF; break;
+ case 3: mask[0] = 0xFF; break;
+ }
+
+ while (addr--)
+ shift_mask(mask);
+
+ __raw_writel(0, &qmgr_regs->sram[queue]);
+
+ used_sram_bitmap[0] &= ~mask[0];
+ used_sram_bitmap[1] &= ~mask[1];
+ used_sram_bitmap[2] &= ~mask[2];
+ used_sram_bitmap[3] &= ~mask[3];
+ irq_handlers[queue] = NULL; /* catch IRQ bugs */
+ spin_unlock_irq(&qmgr_lock);
+
+ module_put(THIS_MODULE);
+#if DEBUG
+ printk(KERN_DEBUG "qmgr: released queue %i\n", queue);
+#endif
+}
+
+static int qmgr_init(void)
+{
+ int i, err;
+ mem_res = request_mem_region(IXP4XX_QMGR_BASE_PHYS,
+ IXP4XX_QMGR_REGION_SIZE,
+ "IXP4xx Queue Manager");
+ if (mem_res == NULL)
+ return -EBUSY;
+
+ qmgr_regs = ioremap(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
+ if (qmgr_regs == NULL) {
+ err = -ENOMEM;
+ goto error_map;
+ }
+
+ /* reset qmgr registers */
+ for (i = 0; i < 4; i++) {
+ __raw_writel(0x33333333, &qmgr_regs->stat1[i]);
+ __raw_writel(0, &qmgr_regs->irqsrc[i]);
+ }
+ for (i = 0; i < 2; i++) {
+ __raw_writel(0, &qmgr_regs->stat2[i]);
+ __raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[i]); /* clear */
+ __raw_writel(0, &qmgr_regs->irqen[i]);
+ }
+
+ for (i = 0; i < QUEUES; i++)
+ __raw_writel(0, &qmgr_regs->sram[i]);
+
+ err = request_irq(IRQ_IXP4XX_QM1, qmgr_irq1, 0,
+ "IXP4xx Queue Manager", NULL);
+ if (err) {
+ printk(KERN_ERR "qmgr: failed to request IRQ%i\n",
+ IRQ_IXP4XX_QM1);
+ goto error_irq;
+ }
+
+ used_sram_bitmap[0] = 0xF; /* 4 first pages reserved for config */
+ spin_lock_init(&qmgr_lock);
+
+ printk(KERN_INFO "IXP4xx Queue Manager initialized.\n");
+ return 0;
+
+error_irq:
+ iounmap(qmgr_regs);
+error_map:
+ release_resource(mem_res);
+ return err;
+}
+
+static void qmgr_remove(void)
+{
+ free_irq(IRQ_IXP4XX_QM1, NULL);
+ synchronize_irq(IRQ_IXP4XX_QM1);
+ iounmap(qmgr_regs);
+ release_resource(mem_res);
+}
+
+module_init(qmgr_init);
+module_exit(qmgr_remove);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Krzysztof Halasa");
+
+EXPORT_SYMBOL(qmgr_regs);
+EXPORT_SYMBOL(qmgr_set_irq);
+EXPORT_SYMBOL(qmgr_enable_irq);
+EXPORT_SYMBOL(qmgr_disable_irq);
+EXPORT_SYMBOL(qmgr_request_queue);
+EXPORT_SYMBOL(qmgr_release_queue);
diff --git a/drivers/net/ixp4xx/npe.h b/drivers/net/ixp4xx/npe.h
new file mode 100644
index 0000000..fd20bf5
--- /dev/null
+++ b/drivers/net/ixp4xx/npe.h
@@ -0,0 +1,41 @@
+#ifndef __IXP4XX_NPE_H
+#define __IXP4XX_NPE_H
+
+#include <linux/etherdevice.h>
+#include <linux/kernel.h>
+#include <asm/io.h>
+
+extern const char *npe_names[];
+
+struct npe_regs {
+ u32 exec_addr, exec_data, exec_status_cmd, exec_count;
+ u32 action_points[4];
+ u32 watchpoint_fifo, watch_count;
+ u32 profile_count;
+ u32 messaging_status, messaging_control;
+ u32 mailbox_status, /*messaging_*/ in_out_fifo;
+};
+
+struct npe {
+ struct resource *mem_res;
+ struct npe_regs __iomem *regs;
+ u32 regs_phys;
+ int id;
+ int valid;
+};
+
+
+static inline const char *npe_name(struct npe *npe)
+{
+ return npe_names[npe->id];
+}
+
+int npe_running(struct npe *npe);
+int npe_send_message(struct npe *npe, const void *msg, const char *what);
+int npe_recv_message(struct npe *npe, void *msg, const char *what);
+int npe_send_recv_message(struct npe *npe, void *msg, const char *what);
+int npe_load_firmware(struct npe *npe, const char *name, struct device *dev);
+struct npe *npe_request(int id);
+void npe_release(struct npe *npe);
+
+#endif /* __IXP4XX_NPE_H */
diff --git a/drivers/net/ixp4xx/qmgr.h b/drivers/net/ixp4xx/qmgr.h
new file mode 100644
index 0000000..d03464a
--- /dev/null
+++ b/drivers/net/ixp4xx/qmgr.h
@@ -0,0 +1,124 @@
+/*
+ * Copyright (C) 2007 Krzysztof Halasa <khc@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ */
+
+#ifndef IXP4XX_QMGR_H
+#define IXP4XX_QMGR_H
+
+#include <linux/kernel.h>
+#include <asm/io.h>
+
+#define HALF_QUEUES 32
+#define QUEUES 64 /* only 32 lower queues currently supported */
+#define MAX_QUEUE_LENGTH 4 /* in dwords */
+
+#define QUEUE_STAT1_EMPTY 1 /* queue status bits */
+#define QUEUE_STAT1_NEARLY_EMPTY 2
+#define QUEUE_STAT1_NEARLY_FULL 4
+#define QUEUE_STAT1_FULL 8
+#define QUEUE_STAT2_UNDERFLOW 1
+#define QUEUE_STAT2_OVERFLOW 2
+
+#define QUEUE_WATERMARK_0_ENTRIES 0
+#define QUEUE_WATERMARK_1_ENTRY 1
+#define QUEUE_WATERMARK_2_ENTRIES 2
+#define QUEUE_WATERMARK_4_ENTRIES 3
+#define QUEUE_WATERMARK_8_ENTRIES 4
+#define QUEUE_WATERMARK_16_ENTRIES 5
+#define QUEUE_WATERMARK_32_ENTRIES 6
+#define QUEUE_WATERMARK_64_ENTRIES 7
+
+/* queue interrupt request conditions */
+#define QUEUE_IRQ_SRC_EMPTY 0
+#define QUEUE_IRQ_SRC_NEARLY_EMPTY 1
+#define QUEUE_IRQ_SRC_NEARLY_FULL 2
+#define QUEUE_IRQ_SRC_FULL 3
+#define QUEUE_IRQ_SRC_NOT_EMPTY 4
+#define QUEUE_IRQ_SRC_NOT_NEARLY_EMPTY 5
+#define QUEUE_IRQ_SRC_NOT_NEARLY_FULL 6
+#define QUEUE_IRQ_SRC_NOT_FULL 7
+
+struct qmgr_regs {
+ u32 acc[QUEUES][MAX_QUEUE_LENGTH]; /* 0x000 - 0x3FF */
+ u32 stat1[4]; /* 0x400 - 0x40F */
+ u32 stat2[2]; /* 0x410 - 0x417 */
+ u32 statne_h; /* 0x418 - queue nearly empty */
+ u32 statf_h; /* 0x41C - queue full */
+ u32 irqsrc[4]; /* 0x420 - 0x42F IRC source */
+ u32 irqen[2]; /* 0x430 - 0x437 IRQ enabled */
+ u32 irqstat[2]; /* 0x438 - 0x43F - IRQ access only */
+ u32 reserved[1776];
+ u32 sram[2048]; /* 0x2000 - 0x3FFF - config and buffer */
+};
+
+extern struct qmgr_regs __iomem *qmgr_regs;
+
+void qmgr_set_irq(unsigned int queue, int src,
+ void (*handler)(void *pdev), void *pdev);
+void qmgr_enable_irq(unsigned int queue);
+void qmgr_disable_irq(unsigned int queue);
+
+/* request_ and release_queue() must be called from non-IRQ context */
+int qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
+ unsigned int nearly_empty_watermark,
+ unsigned int nearly_full_watermark);
+void qmgr_release_queue(unsigned int queue);
+
+
+static inline void qmgr_put_entry(unsigned int queue, u32 val)
+{
+ __raw_writel(val, &qmgr_regs->acc[queue][0]);
+}
+
+static inline u32 qmgr_get_entry(unsigned int queue)
+{
+ return __raw_readl(&qmgr_regs->acc[queue][0]);
+}
+
+static inline int qmgr_get_stat1(unsigned int queue)
+{
+ return (__raw_readl(&qmgr_regs->stat1[queue >> 3])
+ >> ((queue & 7) << 2)) & 0xF;
+}
+
+static inline int qmgr_get_stat2(unsigned int queue)
+{
+ return (__raw_readl(&qmgr_regs->stat2[queue >> 4])
+ >> ((queue & 0xF) << 1)) & 0x3;
+}
+
+static inline int qmgr_stat_empty(unsigned int queue)
+{
+ return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_EMPTY);
+}
+
+static inline int qmgr_stat_nearly_empty(unsigned int queue)
+{
+ return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_EMPTY);
+}
+
+static inline int qmgr_stat_nearly_full(unsigned int queue)
+{
+ return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_FULL);
+}
+
+static inline int qmgr_stat_full(unsigned int queue)
+{
+ return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_FULL);
+}
+
+static inline int qmgr_stat_underflow(unsigned int queue)
+{
+ return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_UNDERFLOW);
+}
+
+static inline int qmgr_stat_overflow(unsigned int queue)
+{
+ return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_OVERFLOW);
+}
+
+#endif
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index 8897f53..373307f 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -336,6 +345,16 @@ config DSCC4_PCI_RST

Say Y if your card supports this feature.

+config IXP4XX_HSS
+ tristate "IXP4xx HSS (synchronous serial port) support"
+ depends on ARCH_IXP4XX
+ select IXP4XX_NPE
+ select IXP4XX_QMGR
+ select HDLC
+ help
+ Say Y here if you want to use built-in HSS ports
+ on IXP4xx processor.
+
config DLCI
tristate "Frame Relay DLCI support"
depends on WAN
diff --git a/include/asm-arm/arch-ixp4xx/platform.h b/include/asm-arm/arch-ixp4xx/platform.h
index ab194e5..8fc9f7c 100644
--- a/include/asm-arm/arch-ixp4xx/platform.h
+++ b/include/asm-arm/arch-ixp4xx/platform.h
@@ -86,6 +85,25 @@ struct ixp4xx_i2c_pins {
unsigned long scl_pin;
};

+#define IXP4XX_ETH_NPEA 0x00
+#define IXP4XX_ETH_NPEB 0x10
+#define IXP4XX_ETH_NPEC 0x20
+
+/* Information about built-in Ethernet MAC interfaces */
+struct mac_plat_info {
+ u8 phy; /* MII PHY ID, 0 - 31 */
+ u8 rxq; /* configurable, currently 0 - 31 only */
+ u8 hwaddr[6];
+};
+
+/* Information about built-in HSS (synchronous serial) interfaces */
+struct hss_plat_info {
+ int (*set_clock)(int port, unsigned int clock_type);
+ int (*open)(int port, void *pdev,
+ void (*set_carrier_cb)(void *pdev, int carrier));
+ void (*close)(int port, void *pdev);
+};
+
/*
* This structure provide a means for the board setup code
* to give information to th pata_ixp4xx driver. It is
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: NeilBrown: "[PATCH 000 of 8] knfsd: Assorted bugfixes for 2.6.22"
Previous message: Krzysztof Halasa: "[PATCH 2/3] ARM: include IXP4xx "fuses" support"
In reply to: Krzysztof Halasa: "Re: [PATCH 2/3] ARM: include IXP4xx "fuses" support"
Next in thread: Michael-Luke Jones: "Re: [PATCH 3/3] Intel IXP4xx network drivers"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]