+
+/* These could be settable by some ioctl() in future... */
+static unsigned int key_repeat_delay = DEFAULT_KEYB_REP_DELAY;
+static unsigned int key_repeat_rate = DEFAULT_KEYB_REP_RATE;
+
+static unsigned char rep_scancode;
+static struct timer_list atakeyb_rep_timer = {
+ .function = atakeyb_rep,
+};
+
+ // handle_scancode(scancode, !break_flag);
+
+
+int atari_kbdrate(struct kbd_repeat *k)
+{
+ if (k->delay > 0) {
+ /* convert from msec to jiffies */
+ key_repeat_delay = (k->delay * HZ + 500) / 1000;
+config KEYBOARD_ATARI
+ tristate "Atari keyboard"
+ depends on ATARI
+ select ATARI_KBD_CORE
+ help
+ Say Y here if you are running Linux on any Atari and have a keyboard
+ attached.
+
+ To compile this driver as a module, choose M here: the
+ module will be called atakbd.
+
+ if (!(atakbd_dev = input_allocate_device()))
+ return -ENOMEM;
+
+ // need to init core driver if not already done so
+ if (atari_keyb_init())
+ return -ENODEV;
+
+ atakbd_dev->name = "Atari Keyboard";
+ atakbd_dev->phys = "atakbd/input0";
+ atakbd_dev->id.bustype = BUS_ATARI;
+ atakbd_dev->id.vendor = 0x0001;
+ atakbd_dev->id.product = 0x0001;
+ atakbd_dev->id.version = 0x0100;
+
+ atakbd_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
+ atakbd_dev->keycode = atakbd_keycode;
+ atakbd_dev->keycodesize = sizeof(unsigned char);
+ atakbd_dev->keycodemax = ARRAY_SIZE(atakbd_keycode);
+
+ for (i = 1; i < 0x72; i++) {
+ atakbd_keycode[i] = i;
+ set_bit(atakbd_keycode[i], atakbd_dev->keybit);
+ }
+
+ input_register_device(atakbd_dev);
+
+static int mouse_threshold[2] = {2,2};
+
+#ifdef __MODULE__
+MODULE_PARM(mouse_threshold, "2i");
+#endif
+#ifdef FIXED_ATARI_JOYSTICK
+extern int atari_mouse_buttons;
+#endif
+static int atamouse_used = 0;
+
+static int atamouse_open(struct input_dev *dev)
+{
+ if (atamouse_used++)
+ return 0;
+
+static int __init atamouse_init(void)
+{
+ if (!MACH_IS_ATARI || !ATARIHW_PRESENT(ST_MFP))
+ return -ENODEV;
+
+ if (!(atamouse_dev = input_allocate_device()))
+ return -ENOMEM;
+
+ if (!(atari_keyb_init()))
+ return -ENODEV;
+
+ atamouse_dev->name = "Atari mouse";
+ atamouse_dev->phys = "atamouse/input0";
+ atamouse_dev->id.bustype = BUS_ATARI;
+ atamouse_dev->id.vendor = 0x0001;
+ atamouse_dev->id.product = 0x0002;
+ atamouse_dev->id.version = 0x0100;
+
+ atamouse_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
+ atamouse_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y);
+ atamouse_dev->keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
+ atamouse_dev->open = atamouse_open;
+ atamouse_dev->close = atamouse_close;
+
+ input_register_device(atamouse_dev);
+
+ printk(KERN_INFO "input: %s at keyboard ACIA\n", atamouse_dev->name);