{Spam?} [PATCH] Remove all traces of legacy power management.

[Robert P. J. Day]

Remove everything related to legacy power management.

Signed-off-by: Robert P. J. Day <rpjday@xxxxxxxxxxxxxx>

---

OK, this is an official patch submission which extends the previous
unofficial one since it also removes the vestiges of legacy PM for the
FR-V and MIPS architectures, although it has been compile-tested only
on x86.


 Documentation/pm.txt            |  123 -----------------
 arch/frv/kernel/pm.c            |    8 -
 arch/i386/kernel/apm.c          |   27 ---
 arch/mips/au1000/common/power.c |    4
 drivers/acpi/bus.c              |   14 --
 drivers/net/3c509.c             |    1
 drivers/serial/68328serial.c    |   59 --------
 include/linux/pm.h              |   70 ----------
 include/linux/pm_legacy.h       |   41 -----
 kernel/power/Kconfig            |   10 -
 kernel/power/Makefile           |    1
 kernel/power/pm.c               |  209 ------------------------------
 12 files changed, 1 insertion(+), 566 deletions(-)

diff --git a/Documentation/pm.txt b/Documentation/pm.txt
index da8589a..d0fcfe2 100644
--- a/Documentation/pm.txt
+++ b/Documentation/pm.txt
@@ -36,93 +36,6 @@ system the associated daemon will exit gracefully.
   apmd:   http://worldvisions.ca/~apenwarr/apmd/
   acpid:  http://acpid.sf.net/

-Driver Interface -- OBSOLETE, DO NOT USE!
-----------------*************************
-
-Note: pm_register(), pm_access(), pm_dev_idle() and friends are
-obsolete. Please do not use them. Instead you should properly hook
-your driver into the driver model, and use its suspend()/resume()
-callbacks to do this kind of stuff.
-
-If you are writing a new driver or maintaining an old driver, it
-should include power management support.  Without power management
-support, a single driver may prevent a system with power management
-capabilities from ever being able to suspend (safely).
-
-Overview:
-1) Register each instance of a device with "pm_register"
-2) Call "pm_access" before accessing the hardware.
-   (this will ensure that the hardware is awake and ready)
-3) Your "pm_callback" is called before going into a
-   suspend state (ACPI D1-D3) or after resuming (ACPI D0)
-   from a suspend.
-4) Call "pm_dev_idle" when the device is not being used
-   (optional but will improve device idle detection)
-5) When unloaded, unregister the device with "pm_unregister"
-
-/*
- * Description: Register a device with the power-management subsystem
- *
- * Parameters:
- *   type - device type (PCI device, system device, ...)
- *   id - instance number or unique identifier
- *   cback - request handler callback (suspend, resume, ...)
- *
- * Returns: Registered PM device or NULL on error
- *
- * Examples:
- *   dev = pm_register(PM_SYS_DEV, PM_SYS_VGA, vga_callback);
- *
- *   struct pci_dev *pci_dev = pci_find_dev(...);
- *   dev = pm_register(PM_PCI_DEV, PM_PCI_ID(pci_dev), callback);
- */
-struct pm_dev *pm_register(pm_dev_t type, unsigned long id, pm_callback cback);
-
-/*
- * Description: Unregister a device with the power management subsystem
- *
- * Parameters:
- *   dev - PM device previously returned from pm_register
- */
-void pm_unregister(struct pm_dev *dev);
-
-/*
- * Description: Unregister all devices with a matching callback function
- *
- * Parameters:
- *   cback - previously registered request callback
- *
- * Notes: Provided for easier porting from old APM interface
- */
-void pm_unregister_all(pm_callback cback);
-
-/*
- * Power management request callback
- *
- * Parameters:
- *   dev - PM device previously returned from pm_register
- *   rqst - request type
- *   data - data, if any, associated with the request
- *
- * Returns: 0 if the request is successful
- *          EINVAL if the request is not supported
- *          EBUSY if the device is now busy and cannot handle the request
- *          ENOMEM if the device was unable to handle the request due to memory
- *
- * Details: The device request callback will be called before the
- *          device/system enters a suspend state (ACPI D1-D3) or
- *          or after the device/system resumes from suspend (ACPI D0).
- *          For PM_SUSPEND, the ACPI D-state being entered is passed
- *          as the "data" argument to the callback.  The device
- *          driver should save (PM_SUSPEND) or restore (PM_RESUME)
- *          device context when the request callback is called.
- *
- *          Once a driver returns 0 (success) from a suspend
- *          request, it should not process any further requests or
- *          access the device hardware until a call to "pm_access" is made.
- */
-typedef int (*pm_callback)(struct pm_dev *dev, pm_request_t rqst, void *data);
-
 Driver Details
 --------------
 This is just a quick Q&A as a stopgap until a real driver writers'
@@ -219,39 +132,3 @@ Q: Who do I contact for additional information about
    enabling power management for my specific driver/device?

 ACPI Development mailing list: linux-acpi@xxxxxxxxxxxxxxx
-
-System Interface -- OBSOLETE, DO NOT USE!
-----------------*************************
-If you are providing new power management support to Linux (ie.
-adding support for something like APM or ACPI), you should
-communicate with drivers through the existing generic power
-management interface.
-
-/*
- * Send a request to all devices
- *
- * Parameters:
- *   rqst - request type
- *   data - data, if any, associated with the request
- *
- * Returns: 0 if the request is successful
- *          See "pm_callback" return for errors
- *
- * Details: Walk list of registered devices and call pm_send
- *          for each until complete or an error is encountered.
- *          If an error is encountered for a suspend request,
- *          return all devices to the state they were in before
- *          the suspend request.
- */
-int pm_send_all(pm_request_t rqst, void *data);
-
-/*
- * Find a matching device
- *
- * Parameters:
- *   type - device type (PCI device, system device, or 0 to match all devices)
- *   from - previous match or NULL to start from the beginning
- *
- * Returns: Matching device or NULL if none found
- */
-struct pm_dev *pm_find(pm_dev_t type, struct pm_dev *from);
diff --git a/arch/frv/kernel/pm.c b/arch/frv/kernel/pm.c
index c57ce3f..73f3aee 100644
--- a/arch/frv/kernel/pm.c
+++ b/arch/frv/kernel/pm.c
@@ -163,14 +163,11 @@ static int sysctl_pm_do_suspend(ctl_table *ctl, int write, struct file *filp,
 	if ((mode != 1) && (mode != 5))
 		return -EINVAL;

-	retval = pm_send_all(PM_SUSPEND, (void *)3);
-
 	if (retval == 0) {
 		if (mode == 5)
 		    retval = pm_do_bus_sleep();
 		else
 		    retval = pm_do_suspend();
-		pm_send_all(PM_RESUME, (void *)0);
 	}

 	return retval;
@@ -183,9 +180,6 @@ static int try_set_cmode(int new_cmode)
 	if (!(clock_cmodes_permitted & (1<<new_cmode)))
 		return -EINVAL;

-	/* tell all the drivers we're suspending */
-	pm_send_all(PM_SUSPEND, (void *)3);
-
 	/* now change cmode */
 	local_irq_disable();
 	frv_dma_pause_all();
@@ -201,8 +195,6 @@ static int try_set_cmode(int new_cmode)
 	frv_dma_resume_all();
 	local_irq_enable();

-	/* tell all the drivers we're resuming */
-	pm_send_all(PM_RESUME, (void *)0);
 	return 0;
 }

diff --git a/arch/i386/kernel/apm.c b/arch/i386/kernel/apm.c
index 064bbf2..46c3ee6 100644
--- a/arch/i386/kernel/apm.c
+++ b/arch/i386/kernel/apm.c
@@ -218,7 +218,6 @@
 #include <linux/time.h>
 #include <linux/sched.h>
 #include <linux/pm.h>
-#include <linux/pm_legacy.h>
 #include <linux/capability.h>
 #include <linux/device.h>
 #include <linux/kernel.h>
@@ -1197,19 +1196,6 @@ static int suspend(int vetoable)
 	int		err;
 	struct apm_user	*as;

-	if (pm_send_all(PM_SUSPEND, (void *)3)) {
-		/* Vetoed */
-		if (vetoable) {
-			if (apm_info.connection_version > 0x100)
-				set_system_power_state(APM_STATE_REJECT);
-			err = -EBUSY;
-			ignore_sys_suspend = 0;
-			printk(KERN_WARNING "apm: suspend was vetoed.\n");
-			goto out;
-		}
-		printk(KERN_CRIT "apm: suspend was vetoed, but suspending anyway.\n");
-	}
-
 	device_suspend(PMSG_SUSPEND);
 	local_irq_disable();
 	device_power_down(PMSG_SUSPEND);
@@ -1232,7 +1218,6 @@ static int suspend(int vetoable)
 	device_power_up();
 	local_irq_enable();
 	device_resume();
-	pm_send_all(PM_RESUME, (void *)0);
 	queue_event(APM_NORMAL_RESUME, NULL);
  out:
 	spin_lock(&user_list_lock);
@@ -1345,7 +1330,6 @@ static void check_events(void)
 			if ((event != APM_NORMAL_RESUME)
 			    || (ignore_normal_resume == 0)) {
 				device_resume();
-				pm_send_all(PM_RESUME, (void *)0);
 				queue_event(event, NULL);
 			}
 			ignore_normal_resume = 0;
@@ -2264,14 +2248,6 @@ static int __init apm_init(void)
 		apm_info.disabled = 1;
 		return -ENODEV;
 	}
-	if (PM_IS_ACTIVE()) {
-		printk(KERN_NOTICE "apm: overridden by ACPI.\n");
-		apm_info.disabled = 1;
-		return -ENODEV;
-	}
-#ifdef CONFIG_PM_LEGACY
-	pm_active = 1;
-#endif

 	/*
 	 * Set up a segment that references the real mode segment 0x40
@@ -2375,9 +2351,6 @@ static void __exit apm_exit(void)
 		kthread_stop(kapmd_task);
 		kapmd_task = NULL;
 	}
-#ifdef CONFIG_PM_LEGACY
-	pm_active = 0;
-#endif
 }

 module_init(apm_init);
diff --git a/arch/mips/au1000/common/power.c b/arch/mips/au1000/common/power.c
index 3901e8e..f3685d6 100644
--- a/arch/mips/au1000/common/power.c
+++ b/arch/mips/au1000/common/power.c
@@ -278,13 +278,11 @@ static int pm_do_sleep(ctl_table * ctl, int write, struct file *file,
 		p = buf;
 		sleep_ticks = simple_strtoul(p, &p, 0);
 #endif
-		retval = pm_send_all(PM_SUSPEND, (void *) 2);

 		if (retval)
 			return retval;

 		au_sleep();
-		retval = pm_send_all(PM_RESUME, (void *) 0);
 	}
 	return retval;
 }
@@ -297,12 +295,10 @@ static int pm_do_suspend(ctl_table * ctl, int write, struct file *file,
 	if (!write) {
 		*len = 0;
 	} else {
-		retval = pm_send_all(PM_SUSPEND, (void *) 2);
 		if (retval)
 			return retval;
 		suspend_mode = 1;

-		retval = pm_send_all(PM_RESUME, (void *) 0);
 	}
 	return retval;
 }
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index dd49ea0..b3e92b4 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -29,7 +29,6 @@
 #include <linux/list.h>
 #include <linux/sched.h>
 #include <linux/pm.h>
-#include <linux/pm_legacy.h>
 #include <linux/device.h>
 #include <linux/proc_fs.h>
 #ifdef CONFIG_X86
@@ -752,18 +751,7 @@ static int __init acpi_init(void)

 	result = acpi_bus_init();

-	if (!result) {
-#ifdef CONFIG_PM_LEGACY
-		if (!PM_IS_ACTIVE())
-			pm_active = 1;
-		else {
-			printk(KERN_INFO PREFIX
-			       "APM is already active, exiting\n");
-			disable_acpi();
-			result = -ENODEV;
-		}
-#endif
-	} else
+	if (result)
 		disable_acpi();

 	return result;
diff --git a/drivers/net/3c509.c b/drivers/net/3c509.c
index f791bf0..a8ea346 100644
--- a/drivers/net/3c509.c
+++ b/drivers/net/3c509.c
@@ -83,7 +83,6 @@ static int max_interrupt_work = 10;
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/pm.h>
-#include <linux/pm_legacy.h>
 #include <linux/skbuff.h>
 #include <linux/delay.h>	/* for udelay() */
 #include <linux/spinlock.h>
diff --git a/drivers/serial/68328serial.c b/drivers/serial/68328serial.c
index cad426c..151bd9a 100644
--- a/drivers/serial/68328serial.c
+++ b/drivers/serial/68328serial.c
@@ -33,7 +33,6 @@
 #include <linux/keyboard.h>
 #include <linux/init.h>
 #include <linux/pm.h>
-#include <linux/pm_legacy.h>
 #include <linux/bitops.h>
 #include <linux/delay.h>

@@ -1324,59 +1323,6 @@ static void show_serial_version(void)
 	printk("MC68328 serial driver version 1.00\n");
 }

-#ifdef CONFIG_PM_LEGACY
-/* Serial Power management
- *  The console (currently fixed at line 0) is a special case for power
- *  management because the kernel is so chatty. The console will be
- *  explicitly disabled my our power manager as the last minute, so we won't
- *  mess with it here.
- */
-static struct pm_dev *serial_pm[NR_PORTS];
-
-static int serial_pm_callback(struct pm_dev *dev, pm_request_t request, void *data)
-{
-	struct m68k_serial *info = (struct m68k_serial *)dev->data;
-
-	if(info == NULL)
-		return -1;
-
-	/* special case for line 0 - pm restores it */
-	if(info->line == 0)
-		return 0;
-
-	switch (request) {
-	case PM_SUSPEND:
-		shutdown(info);
-		break;
-
-	case PM_RESUME:
-		startup(info);
-		break;
-	}
-	return 0;
-}
-
-void shutdown_console(void)
-{
-	struct m68k_serial *info = &m68k_soft[0];
-
-	/* HACK: wait a bit for any pending printk's to be dumped */
-	{
-		int i = 10000;
-		while(i--);
-	}
-
-	shutdown(info);
-}
-
-void startup_console(void)
-{
-	struct m68k_serial *info = &m68k_soft[0];
-	startup(info);
-}
-#endif /* CONFIG_PM_LEGACY */
-
-
 static const struct tty_operations rs_ops = {
 	.open = rs_open,
 	.close = rs_close,
@@ -1467,11 +1413,6 @@ rs68328_init(void)
 			    IRQ_FLG_STD,
 			    "M68328_UART", NULL))
                 panic("Unable to attach 68328 serial interrupt\n");
-#ifdef CONFIG_PM_LEGACY
-	    serial_pm[i] = pm_register(PM_SYS_DEV, PM_SYS_COM, serial_pm_callback);
-	    if (serial_pm[i])
-		    serial_pm[i]->data = info;
-#endif
 	}
 	local_irq_restore(flags);
 	return 0;
diff --git a/include/linux/pm.h b/include/linux/pm.h
index 21db05a..c505f89 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -27,76 +27,6 @@
 #include <asm/atomic.h>

 /*
- * Power management requests... these are passed to pm_send_all() and friends.
- *
- * these functions are old and deprecated, see below.
- */
-typedef int __bitwise pm_request_t;
-
-#define PM_SUSPEND	((__force pm_request_t) 1)	/* enter D1-D3 */
-#define PM_RESUME	((__force pm_request_t) 2)	/* enter D0 */
-
-
-/*
- * Device types... these are passed to pm_register
- */
-typedef int __bitwise pm_dev_t;
-
-#define PM_UNKNOWN_DEV	((__force pm_dev_t) 0)	/* generic */
-#define PM_SYS_DEV	((__force pm_dev_t) 1)	/* system device (fan, KB controller, ...) */
-#define PM_PCI_DEV	((__force pm_dev_t) 2)	/* PCI device */
-#define PM_USB_DEV	((__force pm_dev_t) 3)	/* USB device */
-#define PM_SCSI_DEV	((__force pm_dev_t) 4)	/* SCSI device */
-#define PM_ISA_DEV	((__force pm_dev_t) 5)	/* ISA device */
-#define	PM_MTD_DEV	((__force pm_dev_t) 6)	/* Memory Technology Device */
-
-/*
- * System device hardware ID (PnP) values
- */
-enum
-{
-	PM_SYS_UNKNOWN = 0x00000000, /* generic */
-	PM_SYS_KBC =	 0x41d00303, /* keyboard controller */
-	PM_SYS_COM =	 0x41d00500, /* serial port */
-	PM_SYS_IRDA =	 0x41d00510, /* IRDA controller */
-	PM_SYS_FDC =	 0x41d00700, /* floppy controller */
-	PM_SYS_VGA =	 0x41d00900, /* VGA controller */
-	PM_SYS_PCMCIA =	 0x41d00e00, /* PCMCIA controller */
-};
-
-/*
- * Device identifier
- */
-#define PM_PCI_ID(dev) ((dev)->bus->number << 16 | (dev)->devfn)
-
-/*
- * Request handler callback
- */
-struct pm_dev;
-
-typedef int (*pm_callback)(struct pm_dev *dev, pm_request_t rqst, void *data);
-
-/*
- * Dynamic device information
- */
-struct pm_dev
-{
-	pm_dev_t	 type;
-	unsigned long	 id;
-	pm_callback	 callback;
-	void		*data;
-
-	unsigned long	 flags;
-	unsigned long	 state;
-	unsigned long	 prev_state;
-
-	struct list_head entry;
-};
-
-/* Functions above this comment are list-based old-style power
- * managment. Please avoid using them.  */
-
-/*
  * Callbacks for platform drivers to implement.
  */
 extern void (*pm_idle)(void);
diff --git a/include/linux/pm_legacy.h b/include/linux/pm_legacy.h
deleted file mode 100644
index 514729a..0000000
--- a/include/linux/pm_legacy.h
+++ /dev/null
@@ -1,41 +0,0 @@
-#ifndef __LINUX_PM_LEGACY_H__
-#define __LINUX_PM_LEGACY_H__
-
-
-#ifdef CONFIG_PM_LEGACY
-
-extern int pm_active;
-
-#define PM_IS_ACTIVE() (pm_active != 0)
-
-/*
- * Register a device with power management
- */
-struct pm_dev __deprecated *
-pm_register(pm_dev_t type, unsigned long id, pm_callback callback);
-
-/*
- * Send a request to all devices
- */
-int __deprecated pm_send_all(pm_request_t rqst, void *data);
-
-#else /* CONFIG_PM_LEGACY */
-
-#define PM_IS_ACTIVE() 0
-
-static inline struct pm_dev *pm_register(pm_dev_t type,
-					 unsigned long id,
-					 pm_callback callback)
-{
-	return NULL;
-}
-
-static inline int pm_send_all(pm_request_t rqst, void *data)
-{
-	return 0;
-}
-
-#endif /* CONFIG_PM_LEGACY */
-
-#endif /* __LINUX_PM_LEGACY_H__ */
-
diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
index 51a4dd0..7ade6eb 100644
--- a/kernel/power/Kconfig
+++ b/kernel/power/Kconfig
@@ -19,16 +19,6 @@ config PM
 	  will issue the hlt instruction if nothing is to be done, thereby
 	  sending the processor to sleep and saving power.

-config PM_LEGACY
-	bool "Legacy Power Management API (DEPRECATED)"
-	depends on PM
-	default n
-	---help---
-	   Support for pm_register() and friends.  This old API is obsoleted
-	   by the driver model.
-
-	   If unsure, say N.
-
 config PM_DEBUG
 	bool "Power Management Debug Support"
 	depends on PM
diff --git a/kernel/power/Makefile b/kernel/power/Makefile
index 38725f5..846b303 100644
--- a/kernel/power/Makefile
+++ b/kernel/power/Makefile
@@ -4,7 +4,6 @@ EXTRA_CFLAGS	+=	-DDEBUG
 endif

 obj-y				:= main.o process.o console.o
-obj-$(CONFIG_PM_LEGACY)		+= pm.o
 obj-$(CONFIG_SOFTWARE_SUSPEND)	+= swsusp.o disk.o snapshot.o swap.o user.o

 obj-$(CONFIG_MAGIC_SYSRQ)	+= poweroff.o
diff --git a/kernel/power/pm.c b/kernel/power/pm.c
deleted file mode 100644
index c50d152..0000000
--- a/kernel/power/pm.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- *  pm.c - Power management interface
- *
- *  Copyright (C) 2000 Andrew Henroid
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/pm.h>
-#include <linux/pm_legacy.h>
-#include <linux/interrupt.h>
-#include <linux/mutex.h>
-
-int pm_active;
-
-/*
- *	Locking notes:
- *		pm_devs_lock can be a semaphore providing pm ops are not called
- *	from an interrupt handler (already a bad idea so no change here). Each
- *	change must be protected so that an unlink of an entry doesn't clash
- *	with a pm send - which is permitted to sleep in the current architecture
- *
- *	Module unloads clashing with pm events now work out safely, the module
- *	unload path will block until the event has been sent. It may well block
- *	until a resume but that will be fine.
- */
-
-static DEFINE_MUTEX(pm_devs_lock);
-static LIST_HEAD(pm_devs);
-
-/**
- *	pm_register - register a device with power management
- *	@type: device type
- *	@id: device ID
- *	@callback: callback function
- *
- *	Add a device to the list of devices that wish to be notified about
- *	power management events. A &pm_dev structure is returned on success,
- *	on failure the return is %NULL.
- *
- *      The callback function will be called in process context and
- *      it may sleep.
- */
-
-struct pm_dev *pm_register(pm_dev_t type,
-			   unsigned long id,
-			   pm_callback callback)
-{
-	struct pm_dev *dev = kzalloc(sizeof(struct pm_dev), GFP_KERNEL);
-	if (dev) {
-		dev->type = type;
-		dev->id = id;
-		dev->callback = callback;
-
-		mutex_lock(&pm_devs_lock);
-		list_add(&dev->entry, &pm_devs);
-		mutex_unlock(&pm_devs_lock);
-	}
-	return dev;
-}
-
-/**
- *	pm_send - send request to a single device
- *	@dev: device to send to
- *	@rqst: power management request
- *	@data: data for the callback
- *
- *	Issue a power management request to a given device. The
- *	%PM_SUSPEND and %PM_RESUME events are handled specially. The
- *	data field must hold the intended next state. No call is made
- *	if the state matches.
- *
- *	BUGS: what stops two power management requests occurring in parallel
- *	and conflicting.
- *
- *	WARNING: Calling pm_send directly is not generally recommended, in
- *	particular there is no locking against the pm_dev going away. The
- *	caller must maintain all needed locking or have 'inside knowledge'
- *	on the safety. Also remember that this function is not locked against
- *	pm_unregister. This means that you must handle SMP races on callback
- *	execution and unload yourself.
- */
-
-static int pm_send(struct pm_dev *dev, pm_request_t rqst, void *data)
-{
-	int status = 0;
-	unsigned long prev_state, next_state;
-
-	if (in_interrupt())
-		BUG();
-
-	switch (rqst) {
-	case PM_SUSPEND:
-	case PM_RESUME:
-		prev_state = dev->state;
-		next_state = (unsigned long) data;
-		if (prev_state != next_state) {
-			if (dev->callback)
-				status = (*dev->callback)(dev, rqst, data);
-			if (!status) {
-				dev->state = next_state;
-				dev->prev_state = prev_state;
-			}
-		}
-		else {
-			dev->prev_state = prev_state;
-		}
-		break;
-	default:
-		if (dev->callback)
-			status = (*dev->callback)(dev, rqst, data);
-		break;
-	}
-	return status;
-}
-
-/*
- * Undo incomplete request
- */
-static void pm_undo_all(struct pm_dev *last)
-{
-	struct list_head *entry = last->entry.prev;
-	while (entry != &pm_devs) {
-		struct pm_dev *dev = list_entry(entry, struct pm_dev, entry);
-		if (dev->state != dev->prev_state) {
-			/* previous state was zero (running) resume or
-			 * previous state was non-zero (suspended) suspend
-			 */
-			pm_request_t undo = (dev->prev_state
-					     ? PM_SUSPEND:PM_RESUME);
-			pm_send(dev, undo, (void*) dev->prev_state);
-		}
-		entry = entry->prev;
-	}
-}
-
-/**
- *	pm_send_all - send request to all managed devices
- *	@rqst: power management request
- *	@data: data for the callback
- *
- *	Issue a power management request to a all devices. The
- *	%PM_SUSPEND events are handled specially. Any device is
- *	permitted to fail a suspend by returning a non zero (error)
- *	value from its callback function. If any device vetoes a
- *	suspend request then all other devices that have suspended
- *	during the processing of this request are restored to their
- *	previous state.
- *
- *	WARNING:  This function takes the pm_devs_lock. The lock is not dropped until
- *	the callbacks have completed. This prevents races against pm locking
- *	functions, races against module unload pm_unregister code. It does
- *	mean however that you must not issue pm_ functions within the callback
- *	or you will deadlock and users will hate you.
- *
- *	Zero is returned on success. If a suspend fails then the status
- *	from the device that vetoes the suspend is returned.
- *
- *	BUGS: what stops two power management requests occurring in parallel
- *	and conflicting.
- */
-
-int pm_send_all(pm_request_t rqst, void *data)
-{
-	struct list_head *entry;
-
-	mutex_lock(&pm_devs_lock);
-	entry = pm_devs.next;
-	while (entry != &pm_devs) {
-		struct pm_dev *dev = list_entry(entry, struct pm_dev, entry);
-		if (dev->callback) {
-			int status = pm_send(dev, rqst, data);
-			if (status) {
-				/* return devices to previous state on
-				 * failed suspend request
-				 */
-				if (rqst == PM_SUSPEND)
-					pm_undo_all(dev);
-				mutex_unlock(&pm_devs_lock);
-				return status;
-			}
-		}
-		entry = entry->next;
-	}
-	mutex_unlock(&pm_devs_lock);
-	return 0;
-}
-
-EXPORT_SYMBOL(pm_register);
-EXPORT_SYMBOL(pm_send_all);
-EXPORT_SYMBOL(pm_active);
-
-
-- 
========================================================================
Robert P. J. Day
Linux Consulting, Training and Annoying Kernel Pedantry
Waterloo, Ontario, CANADA

http://fsdev.net/wiki/index.php?title=Main_Page
========================================================================
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/