Re: [PATCH 5/7] [RFC] ds2760 W1 slave
From: Anton Vorontsov
Date: Thu Apr 12 2007 - 10:11:36 EST
Hello Evgeniy,
On Thu, Apr 12, 2007 at 11:08:54AM +0400, Evgeniy Polyakov wrote:
> On Thu, Apr 12, 2007 at 03:25:17AM +0400, Anton Vorontsov (cbou@xxxxxxx) wrote:
> > This is W1 slave for ds2760 chip, found inside almost every HP iPaq and
> > HTC PDAs/phones.
>
> Hi Anton, I have some cleanup-related comments, patch itself looks good.
>
> > diff --git a/drivers/w1/slaves/w1_ds2760.c b/drivers/w1/slaves/w1_ds2760.c
> > new file mode 100644
> > index 0000000..21b0ef6
> > --- /dev/null
> > +++ b/drivers/w1/slaves/w1_ds2760.c
> > @@ -0,0 +1,162 @@
> > +/*
> > + * 1-Wire implementation for the ds2760 chip
> > + *
> > + * Copyright (c) 2004-2005, Szabolcs Gyurko <szabolcs.gyurko@xxxxxx>
> > + *
> > + * Use consistent with the GNU GPL is permitted,
> > + * provided that this copyright notice is
> > + * preserved in its entirety in all copies and derived works.
> > + *
> > + */
> > +
> > +#include <asm/types.h>
>
> Is it really needed?
No, sure.
> > +
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/moduleparam.h>
> > +#include <linux/device.h>
> > +#include <linux/types.h>
> > +#include <linux/jiffies.h>
> > +
> > +#include "../w1.h"
> > +#include "../w1_int.h"
> > +#include "../w1_family.h"
> > +#include "w1_ds2760.h"
> > +
> > +static int w1_ds2760_io(struct device *dev, char *buf, int addr, size_t count,
> > + int io)
> > +{
> > + struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
> > +
> > + if (!dev)
> > + return 0;
> > +
> > + mutex_lock(&sl->master->mutex);
> > +
> > + if (addr > DS2760_DATA_SIZE || addr < 0) {
> > + count = 0;
> > + goto out;
> > + }
> > + if (addr + count > DS2760_DATA_SIZE)
> > + count = DS2760_DATA_SIZE - addr;
> > +
> > + if (!w1_reset_select_slave(sl)) {
> > + if (!io) {
> > + w1_write_8(sl->master, W1_DS2760_READ_DATA);
> > + w1_write_8(sl->master, addr);
> > + count = w1_read_block(sl->master, buf, count);
> > + } else {
> > + w1_write_8(sl->master, W1_DS2760_WRITE_DATA);
> > + w1_write_8(sl->master, addr);
> > + w1_write_block(sl->master, buf, count);
> > + /* XXX w1_write_block returns void, not n_written */
> > + }
> > + }
> > +
> > +out:
> > + mutex_unlock(&sl->master->mutex);
> > +
> > + return count;
> > +}
> > +
> > +int w1_ds2760_read(struct device *dev, char *buf, int addr, size_t count)
> > +{
> > + return w1_ds2760_io(dev, buf, addr, count, 0);
> > +}
> > +
> > +int w1_ds2760_write(struct device *dev, char *buf, int addr, size_t count)
> > +{
> > + return w1_ds2760_io(dev, buf, addr, count, 1);
> > +}
>
> Both are exported, who use them?
ds2760_battery driver. W1 does not have any API to "talk" to w1 slaves
in generic manner (at least I didn't found any).
So, ds2760_battery using it.
static int ds2760_battery_read_status(struct ds2760_device_info *di)
{
[...]
ret = w1_ds2760_read(di->w1_dev, di->raw + start, start, count);
if (ret != count) {
printk("call to w1_ds2760_read failed (0x%08x)\n",
(unsigned int)di->w1_dev);
return 1;
}
static void ds2760_battery_update_status(struct ds2760_device_info *di)
{
[...]
acr[0] = (di->full_active_mAh * 4) >> 8;
acr[1] = (di->full_active_mAh * 4) & 0xff;
if (w1_ds2760_write(di->w1_dev, acr,
DS2760_CURRENT_ACCUM_MSB, 2) < 2)
printk(KERN_ERR "ACR reset failed\n");
di->charge_status = BATTERY_STATUS_FULL;
[...]
> > +/* io = 0 means copy from EEPROM to SRAM, 1 means from SRAM to EEPROM */
> > +static int w1_ds2760_eeprom(struct device *dev, int addr, int io)
> > +{
> > + struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
> > + int ret = 0;
> > +
> > + mutex_lock(&sl->master->mutex);
> > +
> > + if (!w1_reset_select_slave(sl)) {
> > + if (!io)
> > + w1_write_8(sl->master, W1_DS2760_RECALL_DATA);
> > + else
> > + w1_write_8(sl->master, W1_DS2760_COPY_DATA);
> > + w1_write_8(sl->master, addr);
> > + }
> > +
> > + mutex_unlock(&sl->master->mutex);
> > +
> > + return ret;
> > +}
> > +
> > +int w1_ds2760_recall(struct device *dev, int addr)
> > +{
> > + return w1_ds2760_eeprom(dev, addr, 0);
> > +}
> > +
> > +int w1_ds2760_copy(struct device *dev, int addr)
> > +{
> > + return w1_ds2760_eeprom(dev, addr, 1);
> > +}
>
> The same.
Yeah, these two should be static, right.
> > +static ssize_t w1_ds2760_read_bin(struct kobject *kobj, char *buf, loff_t off,
> > + size_t count)
> > +{
> > + struct device *dev = container_of(kobj, struct device, kobj);
> > + return w1_ds2760_read(dev, buf, off, count);
> > +}
> > +
> > +static struct bin_attribute w1_ds2760_bin_attr = {
> > + .attr = {
> > + .name = "w1_slave",
> > + .mode = S_IRUGO,
> > + .owner = THIS_MODULE,
> > + },
> > + .size = DS2760_DATA_SIZE,
> > + .read = w1_ds2760_read_bin,
> > +};
> > +
> > +static int w1_ds2760_add_slave(struct w1_slave *sl)
> > +{
> > + return sysfs_create_bin_file(&sl->dev.kobj, &w1_ds2760_bin_attr);
> > +}
> > +
> > +static void w1_ds2760_remove_slave(struct w1_slave *sl)
> > +{
> > + sysfs_remove_bin_file(&sl->dev.kobj, &w1_ds2760_bin_attr);
> > +}
> > +
> > +static struct w1_family_ops w1_ds2760_fops = {
> > + .add_slave = w1_ds2760_add_slave,
> > + .remove_slave = w1_ds2760_remove_slave,
> > +};
> > +
> > +static struct w1_family w1_ds2760_family = {
> > + .fid = W1_FAMILY_DS2760,
> > + .fops = &w1_ds2760_fops,
> > +};
> > +
> > +static int __init w1_ds2760_init(void)
> > +{
> > + printk("1-Wire driver for the DS2760 battery monitor chip "
> > + " - (c) 2004-2005, Szabolcs Gyurko\n");
> > + return w1_register_family(&w1_ds2760_family);
> > +}
>
> Add something like KERN_INFO into printk.
Will do.
> --
> Evgeniy Polyakov
Thanks!
--
Anton Vorontsov
email: cbou@xxxxxxx
backup email: ya-cbou@xxxxxxxxx
irc://irc.freenode.org/bd2
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/