Re: [PATCH 51/90] ARM: OMAP: osk+mistral backlight, power, board specific

[Tony Lindgren]

* Randy Dunlap <randy.dunlap@xxxxxxxxxx> [070404 15:11]:
> On Wed,  4 Apr 2007 14:05:30 -0400 Tony Lindgren wrote:
> 
> > From: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx>
> > 
> > Mistral-specific:
> > 
> >   - Add PWL-driven LCD backlight device
> > 
> >   - Apply power to the board even when the LCD isn't configured; things
> >     like EEPROM, temperature sensor, and wakeup switch depend on it.
> > 
> > Signed-off-by: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx>
> > Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
> > ---
> >  arch/arm/mach-omap1/board-osk.c |   22 ++++++++++++++++++++++
> >  1 files changed, 22 insertions(+), 0 deletions(-)
> > 
> > diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
> > index 253c539..df9681d 100644
> > --- a/arch/arm/mach-omap1/board-osk.c
> > +++ b/arch/arm/mach-omap1/board-osk.c
> > @@ -373,6 +386,15 @@ static void __init osk_mistral_init(void)
> >  	} else
> >  		printk(KERN_ERR "OSK+Mistral: wakeup button is awol\n");
> >  
> > +	/* LCD:  backlight, and power; power controls other devices on the
> > +	 * board, like the touchscreen, EEPROM, and wakeup (!) switch.
> > +	 */
> > +	omap_cfg_reg(PWL);
> > +	if (omap_request_gpio(2) == 0) {
> > +		omap_set_gpio_direction(2, 0 /* out */);
> > +		omap_set_gpio_dataout(2, 1 /* on */);
> 
> Some #defined values would be better than those comments.

Adding OMAP_GPIO_OUT/ON defines could be fixed later on for all
omap_set_gpio_direction/dataout().

Regards,

Tony
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/