Re: [3/5] 2.6.21-rc4: known regressions (v2)

[Thomas Meyer]

Eric W. Biederman schrieb:
>
> Thomas could you verify the patch below makes the problem go away
> for you.
>   

The patch solves the problem. I'm writing this after the third suspend
and resume cycle.
msi irq stays enabled for libata device:
cat /sys/devices/pci0000\:00/0000\:00\:1f.2/irq
218

cat /proc/interrupts
           CPU0       CPU1
  0:     274190          0   IO-APIC-edge      timer
  9:      13417          0   IO-APIC-fasteoi   acpi
 16:        166          0   IO-APIC-fasteoi   uhci_hcd:usb4
 17:      70908      88643   IO-APIC-fasteoi   wifi0
 18:       3060          0   IO-APIC-fasteoi   libata, uhci_hcd:usb3
 19:          8          0   IO-APIC-fasteoi   ohci1394, uhci_hcd:usb2
 20:      46252          0   IO-APIC-fasteoi   HDA Intel
 21:     168437          0   IO-APIC-fasteoi   uhci_hcd:usb1, ehci_hcd:usb5
218:      15896          0   PCI-MSI-edge      libata
219:          1          0   PCI-MSI-edge      eth0
NMI:          0          0
LOC:      87574     123338
ERR:          0
MIS:          0


BUT...


The first suspend to disk is ok. The second suspend to disk has a
strange behaviour:
1.) write pm image
2.) the system disable the non-boot cpus again (i guess this happens in
power_down())
3.) the system doesn't power down.
4.) pressing any key and the system powers down.

The same is true for the third suspend cycle. Maybe an acpi problem?


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/