BUG: at drivers/hid/hid-core.c:778 implement() with bluetooth keyboard/mouse

From: Kevin Baradon
Date: Wed Mar 21 2007 - 14:23:55 EST


[Please Cc: me as I'm not subscribed]

Hello everybody,


[1.] One line summary of the problem :
"BUG: at drivers/hid/hid-core.c:778 implement()" message in logs when booting
with bluetooth keyboard + mouse.

[2.] Full description of the problem/report :
During bootup, warnings (see below) are emitted in system log.
Hardware :
- P4 3.06MHz
- Logitech Cordless MX Desktop for Bluetooth (keyboard + mouse with an USB
bluetooth adapter).

Please let me know what I could do to help debugging this problem.


[3.] Keywords (i.e., modules, networking, kernel) :
HID, bluetooth, implement(), input

[4.] Kernel version :
Linux version 2.6.21-rc4 (root@kev1) (gcc version 4.1.2 20061115 (prerelease)
(Debian 4.1.1-21)) #9 SMP PREEMPT Sun Mar 18 22:26:43 CET 2007

[5.] Most recent kernel version which did not have the bug :
Unknown, but I'm quite sure 2.6.20 has this problem.

[6.] Output of Oops.. message (if applicable) : extract of dmesg
BUG: at drivers/hid/hid-core.c:778 implement()
[<c029e39a>] hid_output_report+0x23f/0x2de
[<c02886b4>] hid_submit_ctrl+0x59/0x1f2
[<c0288948>] usbhid_submit_report+0xfb/0x172
[<c0288c83>] usbhid_init_reports+0x70/0xe1
[<c028aa16>] hiddev_ioctl+0x435/0xaff
[<c01402bf>] find_get_page+0x37/0x42
[<c0142a2d>] filemap_nopage+0x2f0/0x3e8
[<c016544f>] open_namei+0x79/0x5ad
[<c014bea8>] __handle_mm_fault+0x221/0x915
[<c0166564>] do_ioctl+0x64/0x6d
[<c01665bd>] vfs_ioctl+0x50/0x273
[<c0166814>] sys_ioctl+0x34/0x50
[<c0103f16>] sysenter_past_esp+0x5f/0x85
[<c0360000>] l2cap_sock_sendmsg+0x372/0x397
=======================
BUG: at drivers/hid/hid-core.c:778 implement()
[<c029e39a>] hid_output_report+0x23f/0x2de
[<c02886b4>] hid_submit_ctrl+0x59/0x1f2
[<c0288948>] usbhid_submit_report+0xfb/0x172
[<c0288c83>] usbhid_init_reports+0x70/0xe1
[<c028aa16>] hiddev_ioctl+0x435/0xaff
[<c01402bf>] find_get_page+0x37/0x42
[<c0142a2d>] filemap_nopage+0x2f0/0x3e8
[<c016544f>] open_namei+0x79/0x5ad
[<c014bea8>] __handle_mm_fault+0x221/0x915
[<c0166564>] do_ioctl+0x64/0x6d
[<c01665bd>] vfs_ioctl+0x50/0x273
[<c0166814>] sys_ioctl+0x34/0x50
[<c0103f16>] sysenter_past_esp+0x5f/0x85
[<c0360000>] l2cap_sock_sendmsg+0x372/0x397
=======================
BUG: at drivers/hid/hid-core.c:778 implement()
[<c029e39a>] hid_output_report+0x23f/0x2de
[<c02886b4>] hid_submit_ctrl+0x59/0x1f2
[<c0288948>] usbhid_submit_report+0xfb/0x172
[<c0288c83>] usbhid_init_reports+0x70/0xe1
[<c028aa16>] hiddev_ioctl+0x435/0xaff
[<c01402bf>] find_get_page+0x37/0x42
[<c0142a2d>] filemap_nopage+0x2f0/0x3e8
[<c016544f>] open_namei+0x79/0x5ad
[<c014bea8>] __handle_mm_fault+0x221/0x915
[<c0166564>] do_ioctl+0x64/0x6d
[<c01665bd>] vfs_ioctl+0x50/0x273
[<c0166814>] sys_ioctl+0x34/0x50
[<c0103f16>] sysenter_past_esp+0x5f/0x85
[<c0360000>] l2cap_sock_sendmsg+0x372/0x397
=======================
BUG: at drivers/hid/hid-core.c:778 implement()
[<c029e39a>] hid_output_report+0x23f/0x2de
[<c02886b4>] hid_submit_ctrl+0x59/0x1f2
[<c03679c1>] schedule_timeout+0x4b/0xa1
[<c012e6ed>] finish_wait+0x22/0x48
[<c0288948>] usbhid_submit_report+0xfb/0x172
[<c012e658>] autoremove_wake_function+0x0/0x37
[<c028aa16>] hiddev_ioctl+0x435/0xaff
[<c01402bf>] find_get_page+0x37/0x42
[<c0142a2d>] filemap_nopage+0x2f0/0x3e8
[<c016544f>] open_namei+0x79/0x5ad
[<c014bea8>] __handle_mm_fault+0x221/0x915
[<c0166564>] do_ioctl+0x64/0x6d
[<c01665bd>] vfs_ioctl+0x50/0x273
[<c0166814>] sys_ioctl+0x34/0x50
[<c0103f16>] sysenter_past_esp+0x5f/0x85
[<c0360000>] l2cap_sock_sendmsg+0x372/0x397
=======================
BUG: at drivers/hid/hid-core.c:778 implement()
[<c029e39a>] hid_output_report+0x23f/0x2de
[<c02886b4>] hid_submit_ctrl+0x59/0x1f2
[<c03679c1>] schedule_timeout+0x4b/0xa1
[<c012e6ed>] finish_wait+0x22/0x48
[<c0288948>] usbhid_submit_report+0xfb/0x172
[<c012e658>] autoremove_wake_function+0x0/0x37
[<c028aa16>] hiddev_ioctl+0x435/0xaff
[<c01402bf>] find_get_page+0x37/0x42
[<c0142a2d>] filemap_nopage+0x2f0/0x3e8
[<c016544f>] open_namei+0x79/0x5ad
[<c014bea8>] __handle_mm_fault+0x221/0x915
[<c0166564>] do_ioctl+0x64/0x6d
[<c01665bd>] vfs_ioctl+0x50/0x273
[<c0166814>] sys_ioctl+0x34/0x50
[<c0103f16>] sysenter_past_esp+0x5f/0x85
[<c0360000>] l2cap_sock_sendmsg+0x372/0x397
=======================
BUG: at drivers/hid/hid-core.c:778 implement()
[<c029e39a>] hid_output_report+0x23f/0x2de
[<c02886b4>] hid_submit_ctrl+0x59/0x1f2
[<c03679c1>] schedule_timeout+0x4b/0xa1
[<c012e6ed>] finish_wait+0x22/0x48
[<c0288948>] usbhid_submit_report+0xfb/0x172
[<c012e658>] autoremove_wake_function+0x0/0x37
[<c028aa16>] hiddev_ioctl+0x435/0xaff
[<c01402bf>] find_get_page+0x37/0x42
[<c0142a2d>] filemap_nopage+0x2f0/0x3e8
[<c016544f>] open_namei+0x79/0x5ad
[<c014bea8>] __handle_mm_fault+0x221/0x915
[<c0166564>] do_ioctl+0x64/0x6d
[<c01665bd>] vfs_ioctl+0x50/0x273
[<c0166814>] sys_ioctl+0x34/0x50
[<c0103f16>] sysenter_past_esp+0x5f/0x85
[<c0360000>] l2cap_sock_sendmsg+0x372/0x397
=======================
BUG: at drivers/hid/hid-core.c:778 implement()
[<c029e39a>] hid_output_report+0x23f/0x2de
[<c02886b4>] hid_submit_ctrl+0x59/0x1f2
[<c03679c1>] schedule_timeout+0x4b/0xa1
[<c012e6ed>] finish_wait+0x22/0x48
[<c0288948>] usbhid_submit_report+0xfb/0x172
[<c012e658>] autoremove_wake_function+0x0/0x37
[<c028aa16>] hiddev_ioctl+0x435/0xaff
[<c01402bf>] find_get_page+0x37/0x42
[<c0142a2d>] filemap_nopage+0x2f0/0x3e8
[<c016544f>] open_namei+0x79/0x5ad
[<c014bea8>] __handle_mm_fault+0x221/0x915
[<c0166564>] do_ioctl+0x64/0x6d
[<c01665bd>] vfs_ioctl+0x50/0x273
[<c0166814>] sys_ioctl+0x34/0x50
[<c0103f16>] sysenter_past_esp+0x5f/0x85
[<c0360000>] l2cap_sock_sendmsg+0x372/0x397
=======================
BUG: at drivers/hid/hid-core.c:778 implement()
[<c029e39a>] hid_output_report+0x23f/0x2de
[<c02886b4>] hid_submit_ctrl+0x59/0x1f2
[<c03679c1>] schedule_timeout+0x4b/0xa1
[<c012e6ed>] finish_wait+0x22/0x48
[<c0288948>] usbhid_submit_report+0xfb/0x172
[<c012e658>] autoremove_wake_function+0x0/0x37
[<c028aa16>] hiddev_ioctl+0x435/0xaff
[<c01402bf>] find_get_page+0x37/0x42
[<c0142a2d>] filemap_nopage+0x2f0/0x3e8
[<c016544f>] open_namei+0x79/0x5ad
[<c014bea8>] __handle_mm_fault+0x221/0x915
[<c0166564>] do_ioctl+0x64/0x6d
[<c01665bd>] vfs_ioctl+0x50/0x273
[<c0166814>] sys_ioctl+0x34/0x50
[<c0103f16>] sysenter_past_esp+0x5f/0x85
[<c0360000>] l2cap_sock_sendmsg+0x372/0x397
=======================
input: Logitech Bluetooth Mouð as /class/input/input8
input: Logitech Bluetooth Keyboard as /class/input/input9


[7.] A small shell script or example program which
triggers the problem (if possible) :
Simply boot system with bluetooth keyboard pluged in. Message probably appears
when USB bluetooth adapter is put in HCI mode (with hid2hci).

[8.1.] Software :
Linux kev1 2.6.21-rc4 #9 SMP PREEMPT Sun Mar 18 22:26:43 CET 2007 i686
GNU/Linux

Gnu C 4.1.2
Gnu make 3.81
binutils 2.17
util-linux 2.12r
mount 2.12r
module-init-tools 3.3-pre2
e2fsprogs 1.40-WIP
PPP 2.4.4
Linux C Library 2.3.6
Dynamic linker (ldd) 2.3.6
Procps 3.2.7
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 5.97
udev 105
wireless-tools 29
Modules Loaded rt2500 radeon drm xt_multiport snd_cs46xx tuner
snd_seq_midi 8139too cx88_alsa cx8800 cx88xx mii snd_rawmidi snd_ac97_codec
ir_common video_buf tveeprom btcx_risc ac97_bus

[8.2.] Processor information :
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Pentium(R) 4 CPU 3.06GHz
stepping : 7
cpu MHz : 3066.590
cache size : 512 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe
bogomips : 6164.90
clflush size : 64

processor : 1
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Pentium(R) 4 CPU 3.06GHz
stepping : 7
cpu MHz : 3066.590
cache size : 512 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe
bogomips : 6162.06
clflush size : 64


[8.3.] Module information :
rt2500 172516 0 - Live 0xe1ad2000
radeon 122400 2 - Live 0xe1a81000
drm 126488 3 radeon, Live 0xe1a61000
xt_multiport 3456 1 - Live 0xe08a5000
snd_cs46xx 80456 3 - Live 0xe08ea000
tuner 59304 0 - Live 0xe1915000
snd_seq_midi 8736 0 - Live 0xe08a1000
8139too 25216 0 - Live 0xe08ab000
cx88_alsa 13352 1 - Live 0xe0879000
cx8800 33520 0 - Live 0xe0836000
cx88xx 67108 2 cx88_alsa,cx8800, Live 0xe08d8000
mii 5888 1 8139too, Live 0xe0833000
snd_rawmidi 23840 2 snd_cs46xx,snd_seq_midi, Live 0xe0824000
snd_ac97_codec 93984 1 snd_cs46xx, Live 0xe08c0000
ir_common 34692 1 cx88xx, Live 0xe0869000
video_buf 24580 3 cx88_alsa,cx8800,cx88xx, Live 0xe0861000
tveeprom 15248 1 cx88xx, Live 0xe082b000
btcx_risc 5128 3 cx88_alsa,cx8800,cx88xx, Live 0xe0821000
ac97_bus 2688 1 snd_ac97_codec, Live 0xe081f000

[8.4.] Loaded driver and hardware information :
# cat /proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : 0000:00:02.5
0170-0177 : ide1
01f0-01f7 : 0000:00:02.5
0290-0297 : it87-isa
02f8-02ff : serial
0376-0376 : 0000:00:02.5
0376-0376 : ide1
03c0-03df : vga+
03f2-03f5 : floppy
03f6-03f6 : 0000:00:02.5
03f7-03f7 : floppy DIR
03f8-03ff : serial
0cf8-0cff : PCI conf1
1000-1003 : ACPI PM1a_EVT_BLK
1004-1005 : ACPI PM1a_CNT_BLK
1008-100b : ACPI PM_TMR
1016-1016 : ACPI PM2_CNT_BLK
1020-1023 : ACPI GPE0_BLK
1030-1033 : ACPI GPE1_BLK
1400-141f : 0000:00:02.1
1400-141f : sis96x_smbus
a000-afff : PCI Bus #01
a000-a0ff : 0000:01:00.0
a000-a0ff : radeon
b800-b8ff : 0000:00:0b.0
b800-b8ff : 8139too
bc10-bc17 : 0000:00:0e.0
bc10-bc17 : ide2
c000-c003 : 0000:00:0e.0
c002-c002 : ide2
c410-c417 : 0000:00:0e.0
c410-c417 : ide3
c800-c803 : 0000:00:0e.0
c802-c802 : ide3
cc00-cc0f : 0000:00:0e.0
cc00-cc07 : ide2
cc08-cc0f : ide3
d000-d03f : 0000:00:0f.0
d000-d03f : e1000
d400-d407 : 0000:00:10.0
d800-d803 : 0000:00:10.0
dc00-dc07 : 0000:00:10.0
e000-e003 : 0000:00:10.0
e400-e40f : 0000:00:10.0
f000-f00f : 0000:00:02.5
f000-f007 : ide0
f008-f00f : ide1

# cat /proc/iomem
00000000-0009ffff : System RAM
00000000-00000000 : Crash kernel
000a0000-000bffff : Video RAM area
000c0000-000ccfff : Video ROM
000d0000-000d47ff : Adapter ROM
000f0000-000fffff : System ROM
00100000-1ffeffff : System RAM
00100000-00369b82 : Kernel code
00369b83-0043d537 : Kernel data
1fff0000-1fff2fff : ACPI Non-volatile Storage
1fff3000-1fffffff : ACPI Tables
30000000-3007ffff : 0000:00:10.0
30080000-3009ffff : 0000:00:0e.0
300a0000-300affff : 0000:00:0b.0
e0000000-e7ffffff : 0000:00:00.0
e8000000-f7ffffff : PCI Bus #01
e8000000-efffffff : 0000:01:00.0
e8000000-efffffff : radeon
f0000000-f7ffffff : 0000:01:00.1
f8000000-f9ffffff : PCI Bus #01
f8000000-f801ffff : 0000:01:00.0
f9000000-f900ffff : 0000:01:00.0
f9000000-f900ffff : radeon
f9010000-f901ffff : 0000:01:00.1
fb000000-fbffffff : 0000:00:0c.0
fb000000-fbffffff : cx88[0]
fc000000-fcffffff : 0000:00:0c.1
fc000000-fcffffff : cx88[0]
fd000000-fd0fffff : 0000:00:0d.0
fd000000-fd002fff : CS46xx_BA1_data0
fd010000-fd0137ff : CS46xx_BA1_data1
fd020000-fd026fff : CS46xx_BA1_pmem
fd030000-fd0300ff : CS46xx_BA1_reg
fd100000-fd11ffff : 0000:00:0f.0
fd100000-fd11ffff : e1000
fd120000-fd121fff : 0000:00:0a.0
fd120000-fd121fff : 0000:00:0a.0
fd123000-fd1230ff : 0000:00:0b.0
fd123000-fd1230ff : 8139too
fd124000-fd124fff : 0000:00:03.0
fd124000-fd124fff : ohci_hcd
fd125000-fd125fff : 0000:00:03.1
fd125000-fd125fff : ohci_hcd
fd126000-fd126fff : 0000:00:0d.0
fd126000-fd126fff : CS46xx_BA0
fd127000-fd127fff : 0000:00:03.2
fd127000-fd127fff : ohci_hcd
fd128000-fd128fff : 0000:00:03.3
fd128000-fd128fff : ehci_hcd
fd129000-fd1291ff : 0000:00:10.0
fd129000-fd1291ff : sata_sil
fec00000-ffffffff : reserved

[8.5.] PCI information :
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 655 Host (rev 10)
Subsystem: Silicon Integrated Systems [SiS] 655 Host
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 32
Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=128M]
Capabilities: [c0] AGP version 3.0
Status: RQ=32 Iso- ArqSz=2 Cal=3 SBA+ ITACoh- GART64- HTrans- 64bit- FW+
AGP3+ Rate=x4,x8
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x8

00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SG86C202 (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: f8000000-f9ffffff
Prefetchable memory behind bridge: e8000000-f7ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-

00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO]
(rev 04)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0

00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 0
Region 4: I/O ports at 1400 [size=32]

00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (prog-if 80
[Master])
Subsystem: Silicon Integrated Systems [SiS] SiS5513 EIDE Controller (A,B
step)
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 128
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled]
[size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled]
[size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled]
[size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled]
[size=1]
Region 4: I/O ports at f000 [size=16]

00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller
(rev 0f) (prog-if 10 [OHCI])
Subsystem: Silicon Integrated Systems [SiS] USB 1.0 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR+
Latency: 32 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fd124000 (32-bit, non-prefetchable) [size=4K]

00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller
(rev 0f) (prog-if 10 [OHCI])
Subsystem: Silicon Integrated Systems [SiS] USB 1.0 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 21
Region 0: Memory at fd125000 (32-bit, non-prefetchable) [size=4K]

00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller
(rev 0f) (prog-if 10 [OHCI])
Subsystem: Silicon Integrated Systems [SiS] USB 1.0 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 22
Region 0: Memory at fd127000 (32-bit, non-prefetchable) [size=4K]

00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
(prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Unknown device 5004
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (20000ns max)
Interrupt: pin D routed to IRQ 19
Region 0: Memory at fd128000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0a.0 Network controller: RaLink RT2500 802.11g Cardbus/mini-PCI (rev 01)
Subsystem: Micro-Star International Co., Ltd. Unknown device 6834
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fd120000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at b800 [size=256]
Region 1: Memory at fd123000 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at 300a0000 [disabled] [size=64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0c.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and
Audio Decoder (rev 03)
Subsystem: Hauppauge computer works Inc. Hauppauge WinTV 34xxx models
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0c.1 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio
Decoder [Audio Port] (rev 03)
Subsystem: Hauppauge computer works Inc. Hauppauge WinTV 34xxx models
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (1000ns min, 63750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0d.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24/30
[CrystalClear SoundFusion Audio Accelerator] (rev 01)
Subsystem: Hercules Unknown device a010
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (1000ns min, 6000ns max)
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fd126000 (32-bit, non-prefetchable) [size=4K]
Region 1: Memory at fd000000 (32-bit, non-prefetchable) [size=1M]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0e.0 RAID bus controller: <pci_lookup_name: buffer too small> (rev 10)
Subsystem: Integrated Technology Express, Inc. IT/ITE8212 Dual channel ATA
RAID controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0 (2000ns min, 2000ns max)
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at bc10 [size=8]
Region 1: I/O ports at c000 [size=4]
Region 2: I/O ports at c410 [size=8]
Region 3: I/O ports at c800 [size=4]
Region 4: I/O ports at cc00 [size=16]
[virtual] Expansion ROM at 30080000 [disabled] [size=128K]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0f.0 Ethernet controller: Intel Corporation 82540EM Gigabit Ethernet
Controller (rev 02)
Subsystem: Intel Corporation Unknown device 3013
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (63750ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fd100000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at d000 [size=64]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [e4] PCI-X non-bridge device
Command: DPERE- ERO+ RBC=512 OST=1
Status: Dev=00:00.0 64bit- 133MHz- SCD- USC- DC=simple DMMRBC=2048 DMOST=1
DMCRS=16 RSCEM- 266MHz- 533MHz-
Capabilities: [f0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
Address: 0000000000000000 Data: 0000

00:10.0 Mass storage controller: Silicon Image, Inc. SiI 3112
[SATALink/SATARaid] Serial ATA Controller (rev 02)
Subsystem: Silicon Image, Inc. SiI 3112 SATALink Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at d400 [size=8]
Region 1: I/O ports at d800 [size=4]
Region 2: I/O ports at dc00 [size=8]
Region 3: I/O ports at e000 [size=4]
Region 4: I/O ports at e400 [size=16]
Region 5: Memory at fd129000 (32-bit, non-prefetchable) [size=512]
[virtual] Expansion ROM at 30000000 [disabled] [size=512K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-

01:00.0 VGA compatible controller: ATI Technologies Inc RV350 AS [Radeon 9550]
(prog-if 00 [VGA])
Subsystem: Unknown device 0001:0370
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 23
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at a000 [size=256]
Region 2: Memory at f9000000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at f8000000 [disabled] [size=128K]
Capabilities: [58] AGP version 3.0
Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+
AGP3+ Rate=x4,x8
Command: RQ=32 ArqSz=2 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x8
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:00.1 Display controller: ATI Technologies Inc RV350 AS [Radeon 9550]
(Secondary)
Subsystem: Unknown device 0001:0371
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (2000ns min), Cache Line Size: 32 bytes
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at f9010000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-


[8.6.] SCSI information :
Attached devices:
Host: scsi0 Channel: 00 Target: 00 Lun: 00
Vendor: ATA Model: WDC WD360GD-00FN Rev: 35.0
Type: Direct-Access ANSI SCSI revision: 05

[8.7.] lsusb (attached); dmesg (attached)

--
Kevin Baradon
Networks & Telecom Student
-

Bus 004 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.21-rc4 ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:00:03.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x0012
No power switching (usb 1.0)
No overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled

Bus 003 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.21-rc4 ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:00:03.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x0012
No power switching (usb 1.0)
No overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled

Bus 001 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.21-rc4 ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:03.3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 6
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled

Bus 002 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.21-rc4 ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:00:03.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x0012
No power switching (usb 1.0)
No overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0103 power enable connect
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled

Bus 002 Device 002: ID 0451:2036 Texas Instruments, Inc. TUSB2036 Hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed hub
bMaxPacketSize0 8
idVendor 0x0451 Texas Instruments, Inc.
idProduct 0x2036 TUSB2036 Hub
bcdDevice 1.01
iManufacturer 0
iProduct 1 General Purpose USB Hub
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 1 General Purpose USB Hub
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed hub
iInterface 1 General Purpose USB Hub
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x0014
Ganged power switching
Compound device
No overcurrent protection
bPwrOn2PwrGood 50 * 2 milli seconds
bHubContrCurrent 100 milli Ampere
DeviceRemovable 0x06
PortPwrCtrlMask 0x06
Hub Port Status:
Port 1: 0000.0303 lowspeed power enable connect
Port 2: 0000.0103 power enable connect
Device Status: 0x0000
(Bus Powered)

Bus 002 Device 003: ID 046d:c703 Logitech, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x046d Logitech, Inc.
idProduct 0xc703
bcdDevice 24.04
iManufacturer 1 Logitech
iProduct 2 USB Receiver
iSerial 3 08E6A2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 59
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 98mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Devices
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 1 Keyboard
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 59
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Devices
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 168
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Device Status: 0x0000
(Bus Powered)

Bus 002 Device 004: ID 046d:c707 Logitech, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 224 Wireless
bDeviceSubClass 1 Radio Frequency
bDeviceProtocol 1 Bluetooth
bMaxPacketSize0 64
idVendor 0x046d Logitech, Inc.
idProduct 0xc707
bcdDevice 8.46
iManufacturer 1 Logitech
iProduct 2 Logitech Bluetooth wireless hub
iSerial 3 08E6A2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 193
bNumInterfaces 3
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0009 1x 9 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0009 1x 9 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 2
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0011 1x 17 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0011 1x 17 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 3
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0019 1x 25 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0019 1x 25 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 4
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0021 1x 33 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0021 1x 33 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 5
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0031 1x 49 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0031 1x 49 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 254 Application Specific Interface
bInterfaceSubClass 1 Device Firmware Update
bInterfaceProtocol 0
iInterface 0
Device Status: 0x0000
(Bus Powered)
Linux version 2.6.21-rc4 (root@kev1) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #9 SMP PREEMPT Sun Mar 18 22:26:43 CET 2007
BIOS-provided physical RAM map:
sanitize start
sanitize end
copy_e820_map() start: 0000000000000000 size: 00000000000a0000 end: 00000000000a0000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
copy_e820_map() start: 0000000000100000 size: 000000001fef0000 end: 000000001fff0000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000001fff0000 size: 0000000000003000 end: 000000001fff3000 type: 4
copy_e820_map() start: 000000001fff3000 size: 000000000000d000 end: 0000000020000000 type: 3
copy_e820_map() start: 00000000fec00000 size: 0000000001400000 end: 0000000100000000 type: 2
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
511MB LOWMEM available.
found SMP MP-table at 000f5650
Entering add_active_range(0, 0, 131056) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 131056
early_node_map[1] active PFN ranges
0: 0 -> 131056
On node 0 totalpages: 131056
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 991 pages used for memmap
Normal zone: 125969 pages, LIFO batch:31
DMI 2.3 present.
ACPI: RSDP 000F71F0, 0014 (r0 GBT )
ACPI: RSDT 1FFF3000, 002C (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
ACPI: FACP 1FFF3040, 0074 (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
ACPI: DSDT 1FFF30C0, 3AF1 (r1 GBT AWRDACPI 1000 MSFT 100000C)
ACPI: FACS 1FFF0000, 0040
ACPI: APIC 1FFF6BC0, 0068 (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:2 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
Built 1 zonelists. Total pages: 130033
Kernel command line: root=/dev/sda4 panic=30 vga=extended nmi_watchdog=1 selinux=0 ro
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 3081.603 MHz processor.
Console: colour VGA+ 80x50
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 515392k/524224k available (2470k kernel code, 8356k reserved, 846k data, 212k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffb8000 - 0xfffff000 ( 284 kB)
vmalloc : 0xe0800000 - 0xfffb6000 ( 503 MB)
lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
.init : 0xc0444000 - 0xc0479000 ( 212 kB)
.data : 0xc0369b83 - 0xc043d538 ( 846 kB)
.text : 0xc0100000 - 0xc0369b83 (2470 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 6164.90 BogoMIPS (lpj=3082452)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 00003080 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 14k freed
ACPI: Core revision 20070126
CPU0: Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 07
Booting processor 1/1 eip 2000
Initializing CPU#1
Calibrating delay using timer specific routine.. 6162.06 BogoMIPS (lpj=3081032)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 00003080 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 07
Total of 2 processors activated (12326.96 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
migration_cost=71
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Enabling SiS 96x SMBus.
0000:00:02.5: cannot adjust BAR0 (not I/O)
0000:00:02.5: cannot adjust BAR1 (not I/O)
0000:00:02.5: cannot adjust BAR2 (not I/O)
0000:00:02.5: cannot adjust BAR3 (not I/O)
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
SCSI subsystem initialized
libata version 2.20 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:00:01.0
IO window: a000-afff
MEM window: f8000000-f9ffffff
PREFETCH window: e8000000-f7ffffff
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 6, 262144 bytes)
TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
Machine check exception polling timer started.
IA-32 Microcode Update Driver: v1.14a <tigran@xxxxxxxxxxxxxxxxxxxx>
io scheduler noop registered
io scheduler cfq registered (default)
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /class/input/input2
ACPI: Sleep Button (CM) [FUTS]
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.102 (c) Dave Jones
agpgart: Detected SiS 655 chipset
agpgart: AGP aperture is 128M @ 0xe0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
Copyright (c) 1999-2006 Intel Corporation.
ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 19 (level, low) -> IRQ 16
e1000: 0000:00:0f.0: e1000_probe: (PCI:33MHz:32-bit) 00:20:ed:5b:02:f6
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
Linux video capture interface: v2.00
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
Probing IDE interface ide1...
hdc: ASUS CRW-5224A, ATAPI CD/DVD-ROM drive
hdd: TSSTcorpCD/DVDW SH-S182D, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
IT8212: IDE controller at PCI slot 0000:00:0e.0
ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 18 (level, low) -> IRQ 17
IT8212: chipset revision 16
it821x: controller in pass through mode.
IT8212: 100% native mode on irq 17
ide2: BM-DMA at 0xcc00-0xcc07, BIOS settings: hde:pio, hdf:pio
it821x: Revision 0x10, workarounds activated.
ide3: BM-DMA at 0xcc08-0xcc0f, BIOS settings: hdg:pio, hdh:pio
it821x: Revision 0x10, workarounds activated.
Probing IDE interface ide2...
hde: Maxtor 6Y080P0, ATA DISK drive
ide2 at 0xbc10-0xbc17,0xc002 on irq 17
Probing IDE interface ide3...
hdg: Maxtor 6Y080P0, ATA DISK drive
ide3 at 0xc410-0xc417,0xc802 on irq 17
hde: max request size: 128KiB
hde: 160086528 sectors (81964 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(133)
hde: cache flushes supported
hde: hde1 hde2
hdg: max request size: 128KiB
hdg: 160086528 sectors (81964 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(133)
hdg: cache flushes supported
hdg: hdg1 hdg2
hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 94X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
sata_sil 0000:00:10.0: version 2.1
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 17 (level, low) -> IRQ 18
ata1: SATA max UDMA/100 cmd 0xe0812080 ctl 0xe081208a bmdma 0xe0812000 irq 18
ata2: SATA max UDMA/100 cmd 0xe08120c0 ctl 0xe08120ca bmdma 0xe0812008 irq 18
scsi0 : sata_sil
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: ATA-6: WDC WD360GD-00FNA0, 35.06K35, max UDMA/133
ata1.00: 72303840 sectors, multi 16: LBA48
ata1.00: applying bridge limits
ata1.00: configured for UDMA/100
scsi1 : sata_sil
ata2: SATA link down (SStatus 0 SControl 310)
scsi 0:0:0:0: Direct-Access ATA WDC WD360GD-00FN 35.0 PQ: 0 ANSI: 5
SCSI device sda: 72303840 512-byte hdwr sectors (37020 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 72303840 512-byte hdwr sectors (37020 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 sda6 > sda3 sda4
sd 0:0:0:0: Attached scsi disk sda
ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 19
ehci_hcd 0000:00:03.3: EHCI Host Controller
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 0000:00:03.3
ehci_hcd 0000:00:03.3: irq 19, io mem 0xfd128000
ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.0: irq 20, io mem 0xfd124000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 21
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.1: irq 21, io mem 0xfd125000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 22
ohci_hcd 0000:00:03.2: OHCI Host Controller
ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:03.2: irq 22, io mem 0xfd127000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 2-1: new full speed USB device using ohci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 2 ports detected
usb 2-1.1: new low speed USB device using ohci_hcd and address 3
usb 2-1.1: configuration #1 chosen from 1 choice
usb 2-1.2: new full speed USB device using ohci_hcd and address 4
usb 2-1.2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver hiddev
input: Logitech USB Receiver as /class/input/input3
input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:03.0-1.1
input: Logitech USB Receiver as /class/input/input4
input,hiddev96: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:03.0-1.1
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input5
i2c /dev entries driver
sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x1400
it87: Found IT8705F chip at 0x290, revision 2
it87-isa 9191-0290: Detected broken BIOS defaults, disabling PWM interface
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new interface driver hci_usb
Advanced Linux Sound Architecture Driver Version 1.0.14rc3 (Tue Mar 06 13:10:00 2007 UTC).
ALSA device list:
No soundcards found.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 17
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
Testing NMI watchdog ... OK.
Starting balanced_irq
Using IPI Shortcut mode
input: AT Translated Set 2 keyboard as /class/input/input6
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 212k freed
cx2388x v4l2 driver version 0.0.6 loaded
ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 23
CORE cx88[0]: subsystem: 0070:3401, board: Hauppauge WinTV 34xxx models [card=1,autodetected]
TV tuner -1 at 0x1fe, Radio tuner -1 at 0x1fe
cx2388x alsa driver version 0.0.6 loaded
8139too Fast Ethernet driver 0.9.28
tveeprom 1-0050: Hauppauge model 34519, rev G152, serial# 6748079
tveeprom 1-0050: tuner model is Microtune 4049 FM5 (idx 52, type 45)
tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74)
tveeprom 1-0050: audio processor is CX881 (idx 31)
tveeprom 1-0050: has radio
cx88[0]: hauppauge eeprom: model=34519
input: cx88 IR (Hauppauge WinTV 34xxx as /class/input/input7
cx88[0]/0: found at 0000:00:0c.0, rev: 3, irq: 23, latency: 32, mmio: 0xfb000000
tuner 1-0043: chip found @ 0x86 (cx88[0])
tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 1-0061: chip found @ 0xc2 (cx88[0])
tuner 1-0061: type set to 45 (Microtune 4049 FM5)
tuner 1-0061: type set to 45 (Microtune 4049 FM5)
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88[0]/0: registered device radio0
ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 16
eth0: RealTek RTL8139 at 0xe0874000, 00:50:22:b4:c9:9b, IRQ 16
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:00:0c.1[A] -> GSI 16 (level, low) -> IRQ 23
cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
ACPI: PCI interrupt for device 0000:00:0d.0 disabled
ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 18
cs46xx: failure waiting for FIFO command to complete
Adding 2008116k swap on /dev/sda3. Priority:-1 extents:1 across:2008116k
EXT3 FS on sda4, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hde1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hde2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdg1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ADDRCONF(NETDEV_UP): eth-e1000: link is not ready
e1000: eth-e1000: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
ADDRCONF(NETDEV_CHANGE): eth-e1000: link becomes ready
eth-e1000: no IPv6 routers present
BUG: at drivers/hid/hid-core.c:778 implement()
[<c029e39a>] hid_output_report+0x23f/0x2de
[<c02886b4>] hid_submit_ctrl+0x59/0x1f2
[<c0288948>] usbhid_submit_report+0xfb/0x172
[<c0288c83>] usbhid_init_reports+0x70/0xe1
[<c028aa16>] hiddev_ioctl+0x435/0xaff
[<c01402bf>] find_get_page+0x37/0x42
[<c0142a2d>] filemap_nopage+0x2f0/0x3e8
[<c016544f>] open_namei+0x79/0x5ad
[<c014bea8>] __handle_mm_fault+0x221/0x915
[<c0166564>] do_ioctl+0x64/0x6d
[<c01665bd>] vfs_ioctl+0x50/0x273
[<c0166814>] sys_ioctl+0x34/0x50
[<c0103f16>] sysenter_past_esp+0x5f/0x85
[<c0360000>] l2cap_sock_sendmsg+0x372/0x397
=======================
BUG: at drivers/hid/hid-core.c:778 implement()
[<c029e39a>] hid_output_report+0x23f/0x2de
[<c02886b4>] hid_submit_ctrl+0x59/0x1f2
[<c0288948>] usbhid_submit_report+0xfb/0x172
[<c0288c83>] usbhid_init_reports+0x70/0xe1
[<c028aa16>] hiddev_ioctl+0x435/0xaff
[<c01402bf>] find_get_page+0x37/0x42
[<c0142a2d>] filemap_nopage+0x2f0/0x3e8
[<c016544f>] open_namei+0x79/0x5ad
[<c014bea8>] __handle_mm_fault+0x221/0x915
[<c0166564>] do_ioctl+0x64/0x6d
[<c01665bd>] vfs_ioctl+0x50/0x273
[<c0166814>] sys_ioctl+0x34/0x50
[<c0103f16>] sysenter_past_esp+0x5f/0x85
[<c0360000>] l2cap_sock_sendmsg+0x372/0x397
=======================
BUG: at drivers/hid/hid-core.c:778 implement()
[<c029e39a>] hid_output_report+0x23f/0x2de
[<c02886b4>] hid_submit_ctrl+0x59/0x1f2
[<c0288948>] usbhid_submit_report+0xfb/0x172
[<c0288c83>] usbhid_init_reports+0x70/0xe1
[<c028aa16>] hiddev_ioctl+0x435/0xaff
[<c01402bf>] find_get_page+0x37/0x42
[<c0142a2d>] filemap_nopage+0x2f0/0x3e8
[<c016544f>] open_namei+0x79/0x5ad
[<c014bea8>] __handle_mm_fault+0x221/0x915
[<c0166564>] do_ioctl+0x64/0x6d
[<c01665bd>] vfs_ioctl+0x50/0x273
[<c0166814>] sys_ioctl+0x34/0x50
[<c0103f16>] sysenter_past_esp+0x5f/0x85
[<c0360000>] l2cap_sock_sendmsg+0x372/0x397
=======================
BUG: at drivers/hid/hid-core.c:778 implement()
[<c029e39a>] hid_output_report+0x23f/0x2de
[<c02886b4>] hid_submit_ctrl+0x59/0x1f2
[<c03679c1>] schedule_timeout+0x4b/0xa1
[<c012e6ed>] finish_wait+0x22/0x48
[<c0288948>] usbhid_submit_report+0xfb/0x172
[<c012e658>] autoremove_wake_function+0x0/0x37
[<c028aa16>] hiddev_ioctl+0x435/0xaff
[<c01402bf>] find_get_page+0x37/0x42
[<c0142a2d>] filemap_nopage+0x2f0/0x3e8
[<c016544f>] open_namei+0x79/0x5ad
[<c014bea8>] __handle_mm_fault+0x221/0x915
[<c0166564>] do_ioctl+0x64/0x6d
[<c01665bd>] vfs_ioctl+0x50/0x273
[<c0166814>] sys_ioctl+0x34/0x50
[<c0103f16>] sysenter_past_esp+0x5f/0x85
[<c0360000>] l2cap_sock_sendmsg+0x372/0x397
=======================
BUG: at drivers/hid/hid-core.c:778 implement()
[<c029e39a>] hid_output_report+0x23f/0x2de
[<c02886b4>] hid_submit_ctrl+0x59/0x1f2
[<c03679c1>] schedule_timeout+0x4b/0xa1
[<c012e6ed>] finish_wait+0x22/0x48
[<c0288948>] usbhid_submit_report+0xfb/0x172
[<c012e658>] autoremove_wake_function+0x0/0x37
[<c028aa16>] hiddev_ioctl+0x435/0xaff
[<c01402bf>] find_get_page+0x37/0x42
[<c0142a2d>] filemap_nopage+0x2f0/0x3e8
[<c016544f>] open_namei+0x79/0x5ad
[<c014bea8>] __handle_mm_fault+0x221/0x915
[<c0166564>] do_ioctl+0x64/0x6d
[<c01665bd>] vfs_ioctl+0x50/0x273
[<c0166814>] sys_ioctl+0x34/0x50
[<c0103f16>] sysenter_past_esp+0x5f/0x85
[<c0360000>] l2cap_sock_sendmsg+0x372/0x397
=======================
BUG: at drivers/hid/hid-core.c:778 implement()
[<c029e39a>] hid_output_report+0x23f/0x2de
[<c02886b4>] hid_submit_ctrl+0x59/0x1f2
[<c03679c1>] schedule_timeout+0x4b/0xa1
[<c012e6ed>] finish_wait+0x22/0x48
[<c0288948>] usbhid_submit_report+0xfb/0x172
[<c012e658>] autoremove_wake_function+0x0/0x37
[<c028aa16>] hiddev_ioctl+0x435/0xaff
[<c01402bf>] find_get_page+0x37/0x42
[<c0142a2d>] filemap_nopage+0x2f0/0x3e8
[<c016544f>] open_namei+0x79/0x5ad
[<c014bea8>] __handle_mm_fault+0x221/0x915
[<c0166564>] do_ioctl+0x64/0x6d
[<c01665bd>] vfs_ioctl+0x50/0x273
[<c0166814>] sys_ioctl+0x34/0x50
[<c0103f16>] sysenter_past_esp+0x5f/0x85
[<c0360000>] l2cap_sock_sendmsg+0x372/0x397
=======================
BUG: at drivers/hid/hid-core.c:778 implement()
[<c029e39a>] hid_output_report+0x23f/0x2de
[<c02886b4>] hid_submit_ctrl+0x59/0x1f2
[<c03679c1>] schedule_timeout+0x4b/0xa1
[<c012e6ed>] finish_wait+0x22/0x48
[<c0288948>] usbhid_submit_report+0xfb/0x172
[<c012e658>] autoremove_wake_function+0x0/0x37
[<c028aa16>] hiddev_ioctl+0x435/0xaff
[<c01402bf>] find_get_page+0x37/0x42
[<c0142a2d>] filemap_nopage+0x2f0/0x3e8
[<c016544f>] open_namei+0x79/0x5ad
[<c014bea8>] __handle_mm_fault+0x221/0x915
[<c0166564>] do_ioctl+0x64/0x6d
[<c01665bd>] vfs_ioctl+0x50/0x273
[<c0166814>] sys_ioctl+0x34/0x50
[<c0103f16>] sysenter_past_esp+0x5f/0x85
[<c0360000>] l2cap_sock_sendmsg+0x372/0x397
=======================
BUG: at drivers/hid/hid-core.c:778 implement()
[<c029e39a>] hid_output_report+0x23f/0x2de
[<c02886b4>] hid_submit_ctrl+0x59/0x1f2
[<c03679c1>] schedule_timeout+0x4b/0xa1
[<c012e6ed>] finish_wait+0x22/0x48
[<c0288948>] usbhid_submit_report+0xfb/0x172
[<c012e658>] autoremove_wake_function+0x0/0x37
[<c028aa16>] hiddev_ioctl+0x435/0xaff
[<c01402bf>] find_get_page+0x37/0x42
[<c0142a2d>] filemap_nopage+0x2f0/0x3e8
[<c016544f>] open_namei+0x79/0x5ad
[<c014bea8>] __handle_mm_fault+0x221/0x915
[<c0166564>] do_ioctl+0x64/0x6d
[<c01665bd>] vfs_ioctl+0x50/0x273
[<c0166814>] sys_ioctl+0x34/0x50
[<c0103f16>] sysenter_past_esp+0x5f/0x85
[<c0360000>] l2cap_sock_sendmsg+0x372/0x397
=======================
input: Logitech Bluetooth Mouð as /class/input/input8
input: Logitech Bluetooth Keyboard as /class/input/input9
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 23
[drm] Initialized radeon 1.26.0 20060524 on minor 0
ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 17
rt2500 1.1.0 BETA4 2006/06/18 http://rt2x00.serialmonkey.com
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[drm] Setting GART location based on new memory map
[drm] Loading R300 Microcode
[drm] writeback test succeeded in 1 usecs
APIC error on CPU0: 00(40)