RE: [git patches] libata fixes

[Paul Rolland]

Hello,

> Please match the firmware version as well for the Maxtor drives
Ok.
 
> > --- linux-2.6.21-rc4/drivers/ata/libata-core.c  2007-03-17 
> 19:29:45.000000000
> > +0100
> > +++ linux-2.6.21-rc4-Maxtor/drivers/ata/libata-core.c   2007-03-17
> > 19:37:28.000000000 +0100
> > @@ -3359,6 +3359,8 @@
> >          { "WDC WD740ADFD-00",   NULL,          ATA_HORKAGE_NONCQ },
> >         /* http://thread.gmane.org/gmane.linux.ide/14907 */
> >         { "FUJITSU MHT2060BH",  NULL,           ATA_HORKAGE_NONCQ },
> > +       /* NCQ is broken */
> > +       { "Maxtor 6L250S0",     NULL,           
> ATA_HORKAGE_NONCQ }, 
> >  
> >         /* Devices with NCQ limits */
> >  
> > 
> > Signed-off-by: Paul Rolland <rol@xxxxxxxxxx>
> 
> NAK - but add the firmware to the match and you can have an Ack 8)

Second try, compiled _and_ boot tested, of course.

dmesg says :
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: Maxtor 6L250S0, BANC1G10, max UDMA/133
ata1.00: 490234752 sectors, multi 0: LBA48 NCQ (not used)
ata1.00: configured for UDMA/133

--- linux-2.6.21-rc4/drivers/ata/libata-core.c  2007-03-17 19:47:49.000000000
+0100
+++ linux-2.6.21-rc4-Maxtor/drivers/ata/libata-core.c   2007-03-17
20:24:01.000000000 +0100
@@ -3359,6 +3359,8 @@
         { "WDC WD740ADFD-00",   NULL,          ATA_HORKAGE_NONCQ },
        /* http://thread.gmane.org/gmane.linux.ide/14907 */
        { "FUJITSU MHT2060BH",  NULL,           ATA_HORKAGE_NONCQ },
+       /* NCQ is broken */
+       { "Maxtor 6L250S0",     "BANC1G10",     ATA_HORKAGE_NONCQ }, 
 
        /* Devices with NCQ limits */

Signed-off-by: Paul Rolland <rol@xxxxxxxxxx>

Regards,
Paul

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/