[PATCH] cleanpatch: a script to clean up stealth whitespace added by a patch

[H. Peter Anvin]

This script is a companion to the "cleanfile" script.  This cleans
up a patch in unified diff format *before* it is applied.  Note that
the empty lines at the end of file detection *requires* that the diff was
taken with at least one line of context around each hunk, or bad things
will happen.

This script cleans up various classes of stealth whitespace.  In
particular, it cleans up:

- Whitespace (spaces or tabs)before newline;
- DOS line endings (CR before LF);
- Space before tab (spaces are deleted or converted to tabs);
- Empty lines at end of file.

Signed-off-by: H. Peter Anvin <hpa@xxxxxxxxx>
---
 scripts/cleanpatch |  206 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 206 insertions(+), 0 deletions(-)
 create mode 100755 scripts/cleanpatch

diff --git a/scripts/cleanpatch b/scripts/cleanpatch
new file mode 100755
index 0000000..a53f987
--- /dev/null
+++ b/scripts/cleanpatch
@@ -0,0 +1,206 @@
+#!/usr/bin/perl -w
+#
+# Clean a patch file -- or directory of patch files -- of stealth whitespace.
+# WARNING: this can be a highly destructive operation.  Use with caution.
+#
+
+use bytes;
+use File::Basename;
+
+#
+# Clean up space-tab sequences, either by removing spaces or
+# replacing them with tabs.
+sub clean_space_tabs($)
+{
+    no bytes;			# Tab alignment depends on characters
+
+    my($li) = @_;
+    my($lo) = '';
+    my $pos = 0;
+    my $nsp = 0;
+    my($i, $c);
+
+    for ($i = 0; $i < length($li); $i++) {
+	$c = substr($li, $i, 1);
+	if ($c eq "\t") {
+	    my $npos = ($pos+$nsp+8) & ~7;
+	    my $ntab = ($npos >> 3) - ($pos >> 3);
+	    $lo .= "\t" x $ntab;
+	    $pos = $npos;
+	    $nsp = 0;
+	} elsif ($c eq "\n" || $c eq "\r") {
+	    $lo .= " " x $nsp;
+	    $pos += $nsp;
+	    $nsp = 0;
+	    $lo .= $c;
+	    $pos = 0;
+	} elsif ($c eq " ") {
+	    $nsp++;
+	} else {
+	    $lo .= " " x $nsp;
+	    $pos += $nsp;
+	    $nsp = 0;
+	    $lo .= $c;
+	    $pos++;
+	}
+    }
+    $lo .= " " x $nsp;
+    return $lo;
+}
+
+$name = basename($0);
+
+foreach $f ( @ARGV ) {
+    print STDERR "$name: $f\n";
+
+    if (! -f $f) {
+	print STDERR "$f: not a file\n";
+	next;
+    }
+
+    if (!open(FILE, '+<', $f)) {
+	print STDERR "$name: Cannot open file: $f: $!\n";
+	next;
+    }
+
+    binmode FILE;
+
+    # First, verify that it is not a binary file; consider any file
+    # with a zero byte to be a binary file.  Is there any better, or
+    # additional, heuristic that should be applied?
+    $is_binary = 0;
+
+    while (read(FILE, $data, 65536) > 0) {
+	if ($data =~ /\0/) {
+	    $is_binary = 1;
+	    last;
+	}
+    }
+
+    if ($is_binary) {
+	print STDERR "$name: $f: binary file\n";
+	next;
+    }
+
+    seek(FILE, 0, 0);
+
+    $in_bytes = 0;
+    $out_bytes = 0;
+
+    @lines  = ();
+
+    $in_hunk = 0;
+    $err = 0;
+
+    while ( defined($line = <FILE>) ) {
+	$in_bytes += length($line);
+
+	if (!$in_hunk) {
+	    if ($line =~ /^\@\@\s+\-([0-9]+),([0-9]+)\s+\+([0-9]+),([0-9]+)\s\@\@/) {
+		$minus_lines = $2;
+		$plus_lines = $4;
+		if ($minus_lines || $plus_lines) {
+		    $in_hunk = 1;
+		    @hunk_lines = ($line);
+		}
+	    } else {
+		push(@lines, $line);
+		$out_bytes += length($line);
+	    }
+	} else {
+	    # We're in a hunk
+
+	    if ($line =~ /^\+/) {
+		$plus_lines--;
+
+		$text = substr($line, 1);
+		$text =~ s/[ \t\r]*$//;		# Remove trailing spaces
+		$text = clean_space_tabs($text);
+
+		push(@hunk_lines, '+'.$text);
+	    } elsif ($line =~ /^\-/) {
+		$minus_lines--;
+		push(@hunk_lines, $line);
+	    } elsif ($line =~ /^ /) {
+		$plus_lines--;
+		$minus_lines--;
+		push(@hunk_lines, $line);
+	    } else {
+		print STDERR "$name: $f: malformed patch\n";
+		$err = 1;
+		last;
+	    }
+
+	    if ($plus_lines < 0 || $minus_lines < 0) {
+		print STDERR "$name: $f: malformed patch\n";
+		$err = 1;
+		last;
+	    } elsif ($plus_lines == 0 && $minus_lines == 0) {
+		# End of a hunk.  Process this hunk.
+		my $i;
+		my $l;
+		my @h = ();
+		my $adj = 0;
+		my $done = 0;
+
+		for ($i = scalar(@hunk_lines)-1; $i > 0; $i--) {
+		    $l = $hunk_lines[$i];
+		    if (!$done && $l eq "+\n") {
+			$adj++; # Skip this line
+		    } elsif ($l =~ /^[ +]/) {
+			$done = 1;
+			unshift(@h, $l);
+		    } else {
+			unshift(@h, $l);
+		    }
+		}
+
+		$l = $hunk_lines[0];  # Hunk header
+		undef @hunk_lines;    # Free memory
+
+		if ($adj) {
+		    die unless
+			($l =~ /^\@\@\s+\-([0-9]+),([0-9]+)\s+\+([0-9]+),([0-9]+)\s\@\@(.*)$/);
+		    my $mstart = $1;
+		    my $mlin = $2;
+		    my $pstart = $3;
+		    my $plin = $4;
+		    my $tail = $5; # doesn't include the final newline
+
+		    $l = sprintf("@@ -%d,%d +%d,%d @@%s\n",
+				 $mstart, $mlin, $pstart, $plin-$adj,
+				 $tail);
+		}
+		unshift(@h, $l);
+
+		# Transfer to the output array
+		foreach $l (@h) {
+		    $out_bytes += length($l);
+		    push(@lines, $l);
+		}
+
+		$in_hunk = 0;
+	    }
+	}
+    }
+
+    if ($in_hunk) {
+	print STDERR "$name: $f: malformed patch\n";
+	$err = 1;
+    }
+
+    if (!$err) {
+	if ($in_bytes != $out_bytes) {
+	    # Only write to the file if changed
+	    seek(FILE, 0, 0);
+	    print FILE @lines;
+
+	    if ( !defined($where = tell(FILE)) ||
+		 !truncate(FILE, $where) ) {
+		die "$name: Failed to truncate modified file: $f: $!\n";
+	    }
+	}
+    }
+
+    close(FILE);
+}
-- 
1.5.0.3

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/