Re: Abysmal disk performance, how to debug?

[Willy Tarreau]

On Sat, Jan 20, 2007 at 10:16:15PM +0200, Ismail Dönmez wrote:
> 20 Oca 2007 Cts 22:10 tarihinde, Tim Schmielau ??unlar?? yazm????t??: 
> [...]
> >
> > Note that these dd "benchmarks" are completely bogus, because the data=20
> > doesn't actually get written to disk in that time. For some enlightening=20
> > data, try
> >
> >   time dd if=3D/dev/zero of=3D/tmp/1GB bs=3D1M count=3D1024; time sync
> >
> > The dd returns as soon as all data could be buffered in RAM. Only sync=20
> > will show how long it takes to actually write out the data to disk.
> > also explains why you see better results is writeout starts earlier.
> 
> Still not that bad:
> 
> [~]> time dd if=/dev/zero of=/tmp/1GB bs=1M count=1024;sync
> 1024+0 records in
> 1024+0 records out
> 1073741824 bytes (1,1 GB) copied, 53,3194 s, 20,1 MB/s
> 
> real    0m53.517s
> user    0m0.003s
> sys     0m3.193s

No, your measure is wrong because time measures "dd" and sync is done
after. Either use Tim's method (time sync) or the one I proposed in
previous mail (time dd | sync). Anyway, in your situation with a very
small buffer, this should not change by more than half a second or so.

Willy

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/