[PATCH] arch/i386/kernel/ptrace.c: trivial whitespace cleanup

From: Alan Stern
Date: Tue Jan 16 2007 - 11:54:32 EST


This patch (as838) makes some trivial whitespace fixes to the i386
ptrace.c file. Along with some stylistic issues, an entire section of
code was indented by two extra spaces -- I blame it on stupid
automatic editor indentation!

Signed-off-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>

---

Index: usb-2.6/arch/i386/kernel/ptrace.c
===================================================================
--- usb-2.6.orig/arch/i386/kernel/ptrace.c
+++ usb-2.6/arch/i386/kernel/ptrace.c
@@ -417,61 +417,61 @@ long arch_ptrace(struct task_struct *chi
have to be selective about what portions we allow someone
to modify. */

- ret = -EIO;
- if(addr >= (long) &dummy->u_debugreg[0] &&
- addr <= (long) &dummy->u_debugreg[7]){
-
- if(addr == (long) &dummy->u_debugreg[4]) break;
- if(addr == (long) &dummy->u_debugreg[5]) break;
- if(addr < (long) &dummy->u_debugreg[4] &&
- ((unsigned long) data) >= TASK_SIZE-3) break;
-
- /* Sanity-check data. Take one half-byte at once with
- * check = (val >> (16 + 4*i)) & 0xf. It contains the
- * R/Wi and LENi bits; bits 0 and 1 are R/Wi, and bits
- * 2 and 3 are LENi. Given a list of invalid values,
- * we do mask |= 1 << invalid_value, so that
- * (mask >> check) & 1 is a correct test for invalid
- * values.
- *
- * R/Wi contains the type of the breakpoint /
- * watchpoint, LENi contains the length of the watched
- * data in the watchpoint case.
- *
- * The invalid values are:
- * - LENi == 0x10 (undefined), so mask |= 0x0f00.
- * - R/Wi == 0x10 (break on I/O reads or writes), so
- * mask |= 0x4444.
- * - R/Wi == 0x00 && LENi != 0x00, so we have mask |=
- * 0x1110.
- *
- * Finally, mask = 0x0f00 | 0x4444 | 0x1110 == 0x5f54.
- *
- * See the Intel Manual "System Programming Guide",
- * 15.2.4
- *
- * Note that LENi == 0x10 is defined on x86_64 in long
- * mode (i.e. even for 32-bit userspace software, but
- * 64-bit kernel), so the x86_64 mask value is 0x5454.
- * See the AMD manual no. 24593 (AMD64 System
- * Programming)*/
-
- if(addr == (long) &dummy->u_debugreg[7]) {
- data &= ~DR_CONTROL_RESERVED;
- for(i=0; i<4; i++)
- if ((0x5f54 >> ((data >> (16 + 4*i)) & 0xf)) & 1)
- goto out_tsk;
- if (data)
- set_tsk_thread_flag(child, TIF_DEBUG);
- else
- clear_tsk_thread_flag(child, TIF_DEBUG);
- }
- addr -= (long) &dummy->u_debugreg;
- addr = addr >> 2;
- child->thread.debugreg[addr] = data;
- ret = 0;
- }
- break;
+ ret = -EIO;
+ if (addr >= (long) &dummy->u_debugreg[0] &&
+ addr <= (long) &dummy->u_debugreg[7]) {
+
+ if (addr == (long) &dummy->u_debugreg[4]) break;
+ if (addr == (long) &dummy->u_debugreg[5]) break;
+ if (addr < (long) &dummy->u_debugreg[4] &&
+ ((unsigned long) data) >= TASK_SIZE-3) break;
+
+ /* Sanity-check data. Take one half-byte at once with
+ * check = (val >> (16 + 4*i)) & 0xf. It contains the
+ * R/Wi and LENi bits; bits 0 and 1 are R/Wi, and bits
+ * 2 and 3 are LENi. Given a list of invalid values,
+ * we do mask |= 1 << invalid_value, so that
+ * (mask >> check) & 1 is a correct test for invalid
+ * values.
+ *
+ * R/Wi contains the type of the breakpoint /
+ * watchpoint, LENi contains the length of the watched
+ * data in the watchpoint case.
+ *
+ * The invalid values are:
+ * - LENi == 0x10 (undefined), so mask |= 0x0f00.
+ * - R/Wi == 0x10 (break on I/O reads or writes), so
+ * mask |= 0x4444.
+ * - R/Wi == 0x00 && LENi != 0x00, so we have mask |=
+ * 0x1110.
+ *
+ * Finally, mask = 0x0f00 | 0x4444 | 0x1110 == 0x5f54.
+ *
+ * See the Intel Manual "System Programming Guide",
+ * 15.2.4
+ *
+ * Note that LENi == 0x10 is defined on x86_64 in long
+ * mode (i.e. even for 32-bit userspace software, but
+ * 64-bit kernel), so the x86_64 mask value is 0x5454.
+ * See the AMD manual no. 24593 (AMD64 System
+ * Programming) */
+
+ if (addr == (long) &dummy->u_debugreg[7]) {
+ data &= ~DR_CONTROL_RESERVED;
+ for (i = 0; i < 4; i++)
+ if ((0x5f54 >> ((data >> (16 + 4*i)) & 0xf)) & 1)
+ goto out_tsk;
+ if (data)
+ set_tsk_thread_flag(child, TIF_DEBUG);
+ else
+ clear_tsk_thread_flag(child, TIF_DEBUG);
+ }
+ addr -= (long) &dummy->u_debugreg;
+ addr = addr >> 2;
+ child->thread.debugreg[addr] = data;
+ ret = 0;
+ }
+ break;

case PTRACE_SYSEMU: /* continue and stop at next syscall, which will not be executed */
case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/