Re: SATA exceptions with 2.6.20-rc5

[Robert Hancock]

Björn Steinbrink wrote:
> > My latest bisection attempt actually led to your sata_nv ADMA commit. [1]
> > I've now backed out that patch from 2.6.20-rc5 and have my stress test
> > running for 20 minutes now ("record" for a bad kernel surviving that
> > test is about 40 minutes IIRC). I'll keep it running for at least 2 more
> > hours.
>
> Yep, that one seems to be guilty. 2.6.20-rc5 with that commit backed out
> survived about 3 hours of testing, while the average was around 5
> minutes for a failure, sometimes even before I could log in.
> I took a look at the patch, but I can't really tell anything.
> nv_adma_check_atapi_dma somehow looks like it should not negate its
> return value, so that it returns 0 (atapi dma available) when
> adma_enable was 1. But I'm not exactly confident about that either ;)
> Will it hurt if I try to remove the negation?

It should be correct the way it is - that check is trying to prevent 
ATAPI commands from using DMA until the slave_config function has been 
called to set up the DMA parameters properly. When the 
NV_ADMA_ATAPI_SETUP_COMPLETE flag is not set, this returns 1 which 
disallows DMA transfers. Unless you were using an ATAPI (i.e. CD/DVD) 
device on the channel this wouldn't affect you anyway.

I'll try your stress test when I get a chance, but I doubt I'll run into 
the same problem and I haven't seen any similar reports. Perhaps it's 
some kind of wierd timing issue or incompatibility between the 
controller and that drive when running in ADMA mode? I seem to remember 
various reports of issues with certain Maxtor drives and some nForce 
SATA controllers under Windows at least..

--
Robert Hancock      Saskatoon, SK, Canada
To email, remove "nospam" from hancockr@xxxxxxxxxxxxx
Home Page: http://www.roberthancock.com/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/