Re: Choosing a HyperThreading/SMP/MultiCore kernel ?

[Valdis . Kletnieks]

On Fri, 12 Jan 2007 10:03:49 EST, Lennart Sorensen said:
>
> I would expect any distribution should work on these (as long as the
> kernel they use isn't too old.).  Of course if it is a Mac, you need a
> distribution that supports their firmware (which is of course not a PC
> bios).  As long as you can boot it, any i386 or amd64 kernel with smp
> enabled should use all the processors present (well amd64 on the
> core2duo and on the p4 if it is em64t enabled).

amd64 will only work on a core2duo if it's a T7200 or higher - the
lower numbers are 32-bit-only chipsets.  I admit not knowing what
exact variant the Mac has.

> I believe the closest optimization for a Core2 is probably the Pentium M
> (certainly not the P4/netburst).  Not entirely sure though.

CONFIG_MCORE2=y

That's probably even closer :)  At least in 2.6.20-rc4-mm1.

Attachment: pgp00000.pgp
Description: PGP signature