[PATCH 01/24] Unionfs: Documentation

From: Josef 'Jeff' Sipek
Date: Sun Jan 07 2007 - 23:19:19 EST


From: Josef "Jeff" Sipek <jsipek@xxxxxxxxxxxxx>

This patch contains documentation for Unionfs. You will find several files
outlining basic unification concepts and rename semantics.

Signed-off-by: Josef "Jeff" Sipek <jsipek@xxxxxxxxxxxxx>
Signed-off-by: David Quigley <dquigley@xxxxxxxxxxxxxxxxx>
Signed-off-by: Erez Zadok <ezk@xxxxxxxxxxxxx>
---
Documentation/filesystems/00-INDEX | 2 +
Documentation/filesystems/unionfs/00-INDEX | 8 +++
Documentation/filesystems/unionfs/concepts.txt | 70 ++++++++++++++++++++++++
Documentation/filesystems/unionfs/rename.txt | 31 +++++++++++
Documentation/filesystems/unionfs/usage.txt | 42 ++++++++++++++
5 files changed, 153 insertions(+), 0 deletions(-)

diff --git a/Documentation/filesystems/00-INDEX b/Documentation/filesystems/00-INDEX
index 4dc28cc..c737e3e 100644
--- a/Documentation/filesystems/00-INDEX
+++ b/Documentation/filesystems/00-INDEX
@@ -82,6 +82,8 @@ udf.txt
- info and mount options for the UDF filesystem.
ufs.txt
- info on the ufs filesystem.
+unionfs/
+ - info on the unionfs filesystem
v9fs.txt
- v9fs is a Unix implementation of the Plan 9 9p remote fs protocol.
vfat.txt
diff --git a/Documentation/filesystems/unionfs/00-INDEX b/Documentation/filesystems/unionfs/00-INDEX
new file mode 100644
index 0000000..32e96f2
--- /dev/null
+++ b/Documentation/filesystems/unionfs/00-INDEX
@@ -0,0 +1,8 @@
+00-INDEX
+ - this file.
+concepts.txt
+ - A brief introduction of concepts
+rename.txt
+ - Information regarding rename operations
+usage.txt
+ - Usage and known limitations
diff --git a/Documentation/filesystems/unionfs/concepts.txt b/Documentation/filesystems/unionfs/concepts.txt
new file mode 100644
index 0000000..d417576
--- /dev/null
+++ b/Documentation/filesystems/unionfs/concepts.txt
@@ -0,0 +1,70 @@
+This file describes the concepts needed by a namespace unification file
+system.
+
+Branch Priority:
+================
+
+Each branch is assigned a unique priority - starting from 0 (highest
+priority). No two branches can have the same priority.
+
+
+Branch Mode:
+============
+
+Each branch is assigned a mode - read-write or read-only. This allows
+directories on media mounted read-write to be used in a read-only manner.
+
+
+Whiteouts:
+==========
+
+A whiteout removes a file name from the namespace. Whiteouts are needed when
+one attempts to remove a file on a read-only branch.
+
+Suppose we have a two-branch union, where branch 0 is read-write and branch
+1 is read-only. And a file 'foo' on branch 1:
+
+./b0/
+./b1/
+./b1/foo
+
+The unified view would simply be:
+
+./union/
+./union/foo
+
+Since 'foo' is stored on a read-only branch, it cannot be removed. A
+whiteout is used to remove the name 'foo' from the unified namespace. Again,
+since branch 1 is read-only, the whiteout cannot be created there. So, we
+try on a higher priority (lower numerically) branch and create the whiteout
+there.
+
+./b0/
+./b0/.wh.foo
+./b1/
+./b1/foo
+
+Later, when Unionfs traverses branches (due to lookup or readdir), it
+eliminate 'foo' from the namespace (as well as the whiteout itself.)
+
+
+Duplicate Elimination:
+======================
+
+It is possible for files on different branches to have the same name.
+Unionfs then has to select which instance of the file to show to the user.
+Given the fact that each branch has a priority associated with it, the
+simplest solution is to take the instance from the highest priority
+(numerically lowest value) and "hide" the others.
+
+
+Copyup:
+=======
+
+When a change is made to the contents of a file's data or meta-data, they
+have to be stored somewhere. The best way is to create a copy of the
+original file on a branch that is writable, and then redirect the write
+though to this copy. The copy must be made on a higher priority branch so
+that lookup and readdir return this newer "version" of the file rather than
+the original (see duplicate elimination).
+
diff --git a/Documentation/filesystems/unionfs/rename.txt b/Documentation/filesystems/unionfs/rename.txt
new file mode 100644
index 0000000..e20bb82
--- /dev/null
+++ b/Documentation/filesystems/unionfs/rename.txt
@@ -0,0 +1,31 @@
+Rename is a complex beast. The following table shows which rename(2) operations
+should succeed and which should fail.
+
+o: success
+E: error (either unionfs or vfs)
+X: EXDEV
+
+none = file does not exist
+file = file is a file
+dir = file is a empty directory
+child= file is a non-empty directory
+wh = file is a directory containing only whiteouts; this makes it logically
+ empty
+
+ none file dir child wh
+file o o E E E
+dir o E o E o
+child X E X E X
+wh o E o E o
+
+
+Renaming directories:
+=====================
+
+Whenever a empty (either physically or logically) directory is being renamed,
+the following sequence of events should take place:
+
+1) Remove whiteouts from both source and destination directory
+2) Rename source to destination
+3) Make destination opaque to prevent anything under it from showing up
+
diff --git a/Documentation/filesystems/unionfs/usage.txt b/Documentation/filesystems/unionfs/usage.txt
new file mode 100644
index 0000000..3968c9e
--- /dev/null
+++ b/Documentation/filesystems/unionfs/usage.txt
@@ -0,0 +1,42 @@
+Unionfs is a stackable unification file system, which can appear to merge
+the contents of several directories (branches), while keeping their physical
+content separate. Unionfs is useful for unified source tree management,
+merged contents of split CD-ROM, merged separate software package
+directories, data grids, and more. Unionfs allows any mix of read-only and
+read-write branches, as well as insertion and deletion of branches anywhere
+in the fan-out. To maintain unix semantics, Unionfs handles elimination of
+duplicates, partial-error conditions, and more.
+
+mount -t unionfs -o branch-option[,union-options[,...]] none MOUNTPOINT
+
+The available branch-option for the mount command is:
+
+dirs=branch[=ro|=rw][:...]
+specifies a separated list of which directories compose the union.
+Directories that come earlier in the list have a higher precedence than
+those which come later. Additionally, read-only or read-write permissions of
+the branch can be specified by appending =ro or =rw (default) to each
+directory.
+
+Syntax:
+dirs=/branch1[=ro|=rw]:/branch2[=ro|=rw]:...:/branchN[=ro|=rw]
+
+Example:
+dirs=/writable_branch=rw:/read-only_branch=ro
+
+
+KNOWN ISSUES:
+=============
+
+The NFS server returns -EACCES for read-only exports, instead of -EROFS.
+This means we can't reliably detect a read-only NFS export.
+
+Modifying a Unionfs branch directly, while the union is mounted, is
+currently unsupported. Any such change can cause Unionfs to oops, or stay
+silent and even RESULT IN DATA LOSS.
+
+Unionfs should not use lookup_one_len() on the underlying fs as it confuses
+NFS. Currently, unionfs_lookup() passes lookup intents to the lower
+filesystem, this eliminates part of the problem. The remaining calls to
+lookup_one_len may need to be changed to pass an intent.
+
--
1.4.4.2

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/