Re: ata1: spurious interrupt (irq_stat 0x8 active_tag -84148995 sactive0x0) r0xj0

[Tejun Heo]

Andrew Lyon wrote:
> Hi,
> 
> My system is gigabyte ds3 motherboard with onboard SATA JMicron
> 20360/20363 AHCI Controller (rev 02), drive connected is WDC
> WD740ADFD-00 20.0, I am running 2.6.18.6 32 bit, under heavy i/o I get
> the following messaegs:
> 
> ata1: spurious interrupt (irq_stat 0x8 active_tag -84148995 sactive 0x0)
> ata1: spurious interrupt (irq_stat 0x8 active_tag -84148995 sactive 0x0)
> ata1: spurious interrupt (irq_stat 0x8 active_tag -84148995 sactive 0x0)
> ata1: spurious interrupt (irq_stat 0x8 active_tag -84148995 sactive 0x0)
> ata1: spurious interrupt (irq_stat 0x8 active_tag -84148995 sactive 0x0)
> ata1: spurious interrupt (irq_stat 0x8 active_tag -84148995 sactive 0x0)
> ata1: spurious interrupt (irq_stat 0x8 active_tag -84148995 sactive 0x0)
> ata1: spurious interrupt (irq_stat 0x8 active_tag -84148995 sactive 0x0)
> 
> Is this condition dangerous?

Not usually.  Might indicate something is going wrong in some really
rare cases.  I think vendors are getting NCQ right these days.  Maybe
it's time to remove that printk.

> I plan to upgrade to 2.6.19 soon as I have problems with a sata dvd
> writer but I have to wait for a driver that I need to catch up, this
> system cannot be down for long as it runs mythtv.

Can you apply the attached patch and report what the kernel says?
Please include full dmesg.

Thanks.

-- 
tejun
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index b517d24..13f5853 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1162,10 +1162,21 @@ static void ahci_host_intr(struct ata_port *ap)
 	if (ata_tag_valid(ap->active_tag) && (status & PORT_IRQ_PIOS_FIS))
 		return;
 
-	if (ata_ratelimit())
+	if (ata_ratelimit()) {
+		struct ahci_port_priv *pp = ap->private_data;
+		const u32 *f = pp->rx_fis + 0x58;
+
 		ata_port_printk(ap, KERN_INFO, "spurious interrupt "
-				"(irq_stat 0x%x active_tag %d sactive 0x%x)\n",
+				"(irq_stat 0x%x active_tag 0x%x sactive 0x%x)\n",
 				status, ap->active_tag, ap->sactive);
+		if (status & PORT_IRQ_SDB_FIS) {
+			ata_port_printk(ap, KERN_INFO, "issue=0x%x SAct=0x%x "
+					"SDB_FIS=%08x:%08x\n",
+					readl(port_mmio + PORT_CMD_ISSUE),
+					readl(port_mmio + PORT_SCR_ACT),
+					f[0], f[1]);
+		}
+	}
 }
 
 static void ahci_irq_clear(struct ata_port *ap)