[PATCH 7/12] libata: handle pci_enable_device() failure while resuming

From: Tejun Heo
Date: Tue Dec 26 2006 - 10:22:05 EST


Handle pci_enable_device() failure while resuming. This patch kills
the "ignoring return value of 'pci_enable_device'" warning message and
propagates __must_check through ata_pci_device_do_resume().

Signed-off-by: Tejun Heo <htejun@xxxxxxxxx>
---
drivers/ata/ahci.c | 4 +++-
drivers/ata/libata-core.c | 22 +++++++++++++++++-----
drivers/ata/sata_sil.c | 6 +++++-
drivers/ata/sata_sil24.c | 5 ++++-
include/linux/libata.h | 2 +-
5 files changed, 30 insertions(+), 9 deletions(-)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index b517d24..0656334 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1372,7 +1372,9 @@ static int ahci_pci_device_resume(struct pci_dev *pdev)
void __iomem *mmio = host->mmio_base;
int rc;

- ata_pci_device_do_resume(pdev);
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc)
+ return rc;

if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
rc = ahci_reset_controller(mmio, pdev);
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 0d51d13..5fdf37f 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -6221,12 +6221,22 @@ void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg)
}
}

-void ata_pci_device_do_resume(struct pci_dev *pdev)
+int ata_pci_device_do_resume(struct pci_dev *pdev)
{
+ int rc;
+
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
- pci_enable_device(pdev);
+
+ rc = pci_enable_device(pdev);
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "failed to enable device after resume (%d)\n", rc);
+ return rc;
+ }
+
pci_set_master(pdev);
+ return 0;
}

int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
@@ -6246,10 +6256,12 @@ int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
int ata_pci_device_resume(struct pci_dev *pdev)
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ int rc;

- ata_pci_device_do_resume(pdev);
- ata_host_resume(host);
- return 0;
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc == 0)
+ ata_host_resume(host);
+ return rc;
}
#endif /* CONFIG_PCI */

diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 7808d03..ca7111a 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -710,8 +710,12 @@ err_out:
static int sil_pci_device_resume(struct pci_dev *pdev)
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ int rc;
+
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc)
+ return rc;

- ata_pci_device_do_resume(pdev);
sil_init_controller(pdev, host->n_ports, host->ports[0]->flags,
host->mmio_base);
ata_host_resume(host);
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 5aa288d..da982ed 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -1200,8 +1200,11 @@ static int sil24_pci_device_resume(struct pci_dev *pdev)
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
struct sil24_host_priv *hpriv = host->private_data;
+ int rc;

- ata_pci_device_do_resume(pdev);
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc)
+ return rc;

if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND)
writel(HOST_CTRL_GLOBAL_RST, hpriv->host_base + HOST_CTRL);
diff --git a/include/linux/libata.h b/include/linux/libata.h
index ab27548..8028a57 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -719,7 +719,7 @@ extern int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_i
unsigned int n_ports);
extern void ata_pci_remove_one (struct pci_dev *pdev);
extern void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg);
-extern void ata_pci_device_do_resume(struct pci_dev *pdev);
+extern int __must_check ata_pci_device_do_resume(struct pci_dev *pdev);
extern int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
extern int ata_pci_device_resume(struct pci_dev *pdev);
extern int ata_pci_clear_simplex(struct pci_dev *pdev);
--
1.4.4.2


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/