Re: How to go about debuging a system lockup?

[Stefan Richter]

Lennart Sorensen wrote:
> On Thu, Nov 16, 2006 at 04:01:03PM -0600, Protasevich, Natalie wrote:
>> There are some port 80 cards that you can buy:
...
> Hmm, one of those on the PCI bus might work.  Or perhaps the parallel
> port will.  Of course if the problem is that somehow the PCI bus is
> locked up, then I won't get a message anywhere since all the busses are
> connected via PCI it seems.  I don't know if a PCI bus can lock up, but
> for now I was assuming anything was possible.

If the PCI bus itself isn't brought down, you could debug from remote
using Benjamin Herrenschmidt's Firescope on the remote node and a
FireWire card in the test machine. Once the ohci1394 driver was loaded,
the FireWire controller is able to read and write to the 32bit PCI
address range (and thus to system memory) without assistance of
interrupt handlers.
-- 
Stefan Richter
-=====-=-==- =-== =---=
http://arcgraph.de/sr/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/