Re: IDE cs5530 hda: lost interrupt

From: Mark Lord
Date: Wed Nov 08 2006 - 18:54:12 EST


Saulo wrote:
Hi all,

any help is wellcome...

--------------------
CPU: NSC Geode(TM) Integrated Processor by National Semi stepping 02
...
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
CS5530: ide CONTROLLER AT pci SLOT 0000:00:12.2
CS5530: chipset revision 0
CS5530: not 100% native mode: will probe irqs later
PCI: Enabling bus mastering for device 0000:00:12.2
PCI: Setting latency timer of device 0000:00:12.2 to 64
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio
hda: CF 32MB, CFA DISK drive
hda: IRQ probe failed (0xfeba) >>> I think my problem may start here, but when I fix to IRQ 14 in try_to_identify() to hda the problem persist
ide0 at 0x1f0-0x1f7,0x3f6 on irq14
hdc: Hitachi CV 5.1.1, CFA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15 (serialized with ide0)
hda: max request size: 128KiB
hda: 62976 sectors (32MB) w/1KiB Cache, CHS=492/4/32
hda:<4>hda: lost interrupt
hda: lost interrupt
hda: lost interrupt
...
...

Send me one of those devices and I'll fix it.

Cheers
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/